(2) 1965-P 40% Silver, (2) 1966-P 40% Silver, (1) 1968-D 40% Silver.

Marked No. 3 in casting with tin dish. Turn of the Century. Good condition

American made semiautomatic rimfire rifle chambered in .22 LR manufactured in Southport, CT in 1994. It features a blued finish, smooth wood sock with curved metal buttplate, 18.5" cold hammer forged barrel, red fiber optic blade front sight, Williams green fiber optic rear sight, push-button safety, sling swivel studs, smooth curved trigger, extended magazine release. Mounted with a Bushnell Sportview 3x-9x, 32 scope with duplex reticle, Weaver rings on "See Trough" base, clear optics The bore is excellent/bright with strong rifling. The metal retains approximately 98% of the finish with minor edge wear on the matte black receiver. The wood stock is excellent. Comes in factory box with matching label, manual, one factory 10-rd magazine and two Ram-Line 30-rd magazines. NRA Condition-Excellent in Box. Modern Firearm.

Both are in great condition. Hide Measures 40" x 26"; Pillow measures 15" x 15"

Including a sterling inlaid ring, a mother of pearl carved ring and a faux oval ring set in 18k electroplated.

The "Creedmoor," an Italian made single-shot rolling block rifle chambered for .45-70 Government, and manufactured circa 2019 by Pedersoli. Imported by Italian Firearms Group out of Amarillo, TX. Rifle features a coin finished receiver, blued 30" round barrel with a 1:18" twist rate, tunnel front sight with the insert removed, elevation adjustable semi-buckhorn sporting rear sight (elevator removed), tang drilled and tapped for a long range Creedmoor sight, double smooth curved set triggers, coin finished trigger guard, blued breech block and hammer with serrated spurs, and a shell extractor. The select walnut furniture consists of a semi-pistol gripped shoulder stock with checkering at the wrist, checkered forend, and a smooth metal butt plate. The original blued finish retained is approximately 99% with light specks on the right side of the barrel about 4-1/2" from the muzzle. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. The walnut furniture is in excellent condition with superficial handling marks. Condition is NRA Excellent. ***Modern Firearm***

Excellent mount of Pronghorn on wood base with grass. Can be mounted on wall or put on shelf. Measures 39"H x 17"W x 20"D.

Sterling silver heart pendant on link sterling chain. Maker marked Tiffany & Co. 925 Spain.

high-grade 88mm angled-body spotting scope featuring a large objective lens for exceptional light gathering. It weighs 3.35 lbs, measures 13.5' long, is fully waterproof and fogproof. Kowa 25xLER interchangeable eyepiece installed. Mounted on a R&R designs competition aluminum scope stand. Excellent condition, clear optics. Comes with original boxes for scope & eye piece with manuals.

Unopened full box 41 cal Colt centerfire - "Picture Box" with green label featuring 1877 Thunderer Storekeepers model with checkered wood grips by Winchester Repeating Arms Co. Fine to excellent condition. 9-9-1/2 on a 1 to 10 scale especially for an early box. Bob Butterfield Collection

Includes: Taser X2 with holster and (4) cartridges

American made semi-automatic direct gas impingement modern sporting rifle chambered for .300 AAC (Advanced Armament Corporation) Blackout, and manufactured in Hebron, KY. Rifle features a Flat Dark Earth (FDE) Cerakote type finish, an approximately 16" barrel with a stepped contour, knurled thread protector, carbine length gas system, low-profile gas block, no iron sights installed, serrated receiver mounted manual safety, picatinny flattop upper receiver, spring loaded ejection port cover, annular cut forward assist, shell deflector, flared magazine well, annular cut push-button magazine release, M16 style bolt carrier with a staked gas key, smooth curved two-stage trigger, oversized Magpul polymer trigger guard, Mil-Spec buffer and spring, six-position Mil-Spec receiver extension, serrated paddle bolt release, and a Mil-Spec charging handle. The synthetic furniture consists of a black 9" aluminum knurled free-float tube, granular textured FDE Blackhawk pistol grip with low finger grooves, black solid rubber recoil pad, and an adjustable FDE Magpul MOE shoulder stock with sling slots. A FDE Monstrum Ghost red dot and 3x magnifier combination is mounted to the top of the upper receiver's accessory rail. The original FDE finish retained is approximately 97% with very minor handling blemishes on the receivers, and ejected shell marks on the shell deflector. Metal displays no deformation, or rust. The action is smooth and crisp, and the bore is bright with strong rifling. The polymer furniture is also in excellent condition with nothing remarkable. The Monstrum optics function well. Rifle includes one magazine total. Condition is NRA Near Excellent. ***Modern Firearm***

Various size 4.5, 5.5, 6 and two are 6.5

5 Pins, includes a set of fleur-de-lis brooches, a set of buckle brooches, dress clips 1 broach, 1 ring, size 3.

Probably Shiva (God of Dance) surrounded by ring of fire. Probably Indian 18th to 20th century 15-1/2H x by 10-1/2W approximately . Uncleaned patina. Wooden Wall hanging of buddahist diety.

Four turquoise bolo ties and Masonic antique watching with a letter G on each side of the watch

1) Certificate of Authenticity Hand Painted by Kris Tostenson entitled Swimming Pintail Edition 2429 of 2900. Measures 13.5"L x 7"H 2) Certificate of Authenticity part of the "Crow Springs Collection" by Loon Lake Decoy Co. Limited Edition 1691 of 2900. Measures 14.5"L x 8.5"H 3) Certificate of Authenticity part of the "Crow Springs Collection" by Loon Lake Decoy Co. Limited Edition 924 of 2900. Measures 14"L x 8"H 4) Certificate of Authenticity part of the "Crow Springs Collection" by Loon Lake Decoy Co. Limited Edition 534 of 2900. Measures 12"L x 6"H

with Sterling Silver clasp.

56" Horn To Base. 369" Base To Nose, 32" Horns

Large turquoise stone with heavy matrix, set in sterling silver. 3-1/2" x 2-1/2" with sterling tips

Made in West Germany 1955 to 1968. Break open tip-up double barrel derringer features chrome finish, checkered black plastic grips with "HH" medallion on the left panel, 3" barrel with fixed sights, manual extraction, spur trigger. Comes in the original box with floral tooled brown leather holster, stitching on the seam has separated. Bores are very good/bright, barrels lock-up tight, finish is very good with no flaking or peeling observed and the grips are very good. Matching serial numbers, German nitro proofs. Condition is NRA Very Good. *** Modern Firearm ***

Original U.S. WWII USAAF Pilot Type B-9 Parachute by Pioneer Parachute Company. Dated February, 1945. Consigner states he obtained this from a friend who was a North American Aviation (NAA) P-51 Mustang pilot during the war. The name " Flakenberg" is written under the top flap in the rear. Standard-issue 24-foot back-pack parachute utilized by United States Army Air Forces combat pilots and bomber aircrews during World War II. Designed as a slight variation to the popular B-8, it featured a semi-rigid wire-framed canvas pack and was worn with a quick-release harness. Officially designated as "Parachute Complete - Pilot, 24-Foot Back Type B-9." The pack's tag reads: "PIONEER PARACHUTE MODEL_______-N C.A.A.T.C. NO. 119 SERIAL NO. 390261 DATE OF MFG. FEB 1945 MFG. BY. PIONNER PARACHUTE CO. INC. MANCHESTER, CONNECTICUT, U.S.A." Harness is ink stamped but too feint to read. There is no inspection or packing data card in the sleeve. Rip cord intact, overall very good condition, complete.

Early U.S. WWII M1 fixed bale helmet features chinstrap loops welded directly to the steel shell (prior to the late 1943 switch to swivel loops). Original early-war models are characterized by a front seam, cork-textured OD finish, and khaki (OD#3) chinstraps, which this helmet has. Original CAPAC liner with original intact/complete web/leather lining, includes the thin leather liner chinstrap. Manufactured in Capac, Michigan this “high pressure” liner has embossed “cross” with the words “Capac” in the crown. Started M-1 liner delivery to the US Army in September 1942 and discontinued production around August 17 1945. The web chinstrap is original to the helmet, has the vast majority of the original paint with some scratches/rubs.

Complete AR-15 20" upper receiver chambered for 5.56x45mm NATO ammunition. It is assumed that this is a 5.56x45mm chambered barrel, because the barrel is not marked. Please use chamber gauges to verify chamber before firing. Upper features a heavy contour barrel, picatinny flat-top receiver, rifle length gas system, .750" picatinny gas block, 3-port muzzle compensator, dust cover, shell deflector, annular cut bolt assist, AR-15 style bolt carrier, staked gas key, standard charging handle, ribbed black plastic handguard with aluminum heat shields, and sling loop on the gas block. The original matte black finish retained is approximately 96% with a few handling blemishes. Metal displays no rust, or deformation. The handguards are in excellent condition with little remarkable, and the bore is bright with strong rifling. Condition is NRA Very Good.

American made magazine fed bolt-action centerfire rifle chambered for .450 Bushmaster, and manufactured circa 2021 in Newport, NH. The model number/SKU for this Ruger American is 16950. Rifle features Flat Dark Earth furniture (FDE), picatinny optic rail on the receiver, an approximately 16.12" cold hammer-forged tapered barrel with a 1:16 twist rate, threaded muzzle with a ported muzzle brake, no provision for iron sights, single-piece three-lug bolt with a 70 degree throw, turned down and swept back bolt handle, accepts 3-round detachable magazines, adjustable (3-5 pound pull) Marksman trigger with an integral blade safety, left receiver rail mounted bolt release, and a serrated sliding tang safety. The composite FDE furniture consists of a semi=pistol gripped shoulder stock with granular texturing at the wrist, finger grooved granular textured forend, sling studs at the forend and the bottom of the shoulder stock, black grip cap with a red Ruger Phoenix emblem, and a black solid rubber recoil pad. The original matte black receiver and barrel finish retained is approximately 99% with only superficial blemishes. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. The furniture polymer is in excellent condition with little to speak of. Rifle includes one magazine total. Condition is NRA Excellent. ***Modern Firearm***

Sizes vary 4, 4.5, and two are 6.5.

Ring is size 2.5 and the band is 5.5

Marked ladlake. Multi-colored glass globes with bracket for attachment to post and latch with hasp to lock. Electrified and use as a lamp. Approximately 9-1/4H x 9-1/4W. Very good condition exterior - NOT guaranteed and electrical should be checked before any attempt at use for safety purposes. As is. Decorator only

and Arpel Vintage Alhambra Mother of Pearl gold tone necklace. Compare to over $10,000 Original Van Cleef in 18 karat yellow gold.

Certificate of Authenticity included (1) 2011, (6) 2012, (2) 2014 and (1) 2017.

1) Certificate of Authenticity part of the "Crow Springs Collection" by Loon Lake Decoy Co. Limited Edition 762 of 2900. Measures 16.5"L x 9.5"H. 2) Certificate of Authenticity part of the "Crow Springs Collection" by Loon Lake Decoy. Limited Co. Edition 1321 of 2900. Measures 12.5"L x 9"H 3) Certificate of Authenticity part of the "Crow Springs Collection" by Loon Lake Decoy Co. Limited Edition 602 of 2900. Measures 10.5"L x 6"H

Hand-signed lower right corner and numbered 244 of 25,000 lower left corner. Matted and framed, measures 33" tall by approximately 42" wide. Comes with Certificate of Authenticity. Carl Brender, born 1937, is known for his realistic wildlife illustration.

American made lever-action centerfire rifle chambered for .356 Winchester, and manufactured New Haven, CT. The Winchester Model 94AE (Angle Eject) XTR was introduced around 1982, and discontinued in 1988 when the 'XTR' normenclature was removed. The 'XTR' designation refers to 'Extra Finish', or premium finish and furniture. The .356 Win. was designed around the .307 Win cartridge, and intended for new big bore lever-action rifles like the Model 94AE XTR. Rifle features a blued finish, receiver drilled and tapped for optic mounting, a 20" round barrel, dovetailed blade front sight with a silver colered bead, dovetailed elevation adjustable flip-up 'U' notched rear sight with a white triangle aiming guide, full length tube magazine, angle eject for scope clearance, smooth curved trigger, grip safety, external hammer with a serrated spur, one optic rail section installed on the receiver, and a barrel band behind the front sight. The American Walnut furniture consists of a smooth straight gripped shoulder stock, smooth forend with a barrel band, sling attachment point on a magazine tube band, and a black checkered factory plastic buttplate. The screw is missing from the rear barrel band. The original blued finish retained is approximately 98% with edge wear, and superficial blemishes. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. The walnut furniture is in excellent condition with extremely minor handling marks, and a factory 'Genuine American Walnut' sticker is on the bottom of the shoulder stock. Rifle would be considered excellent if it were not missing the barrel band screw. Condition is NRA Near Excellent. ***Modern Firearm***

31" from base to nose, 11.5" spread, 29"H

Shoulder mounted measures 22" from nose to neck. 11"W at base. Excellent condition. ***Shipping Must Be Arranged By Buyer***

Unique hand crafted designs from classic crests to unique pieces of distinguished style

(1) Three Shinwa swords with damascus steel blades with Asian farmer on the Tsuba with turquoise wrapped handle, like new in satin lined display case (2) Chinese made sword with a garden scene on the Tsuba, black lacquered scabbard with black wrapped handle, like new in satin lined display case

features Button shape Pearls measuring approx. 14.5 mm with extra rich luster set on 14 karat yellow gold posts.

Switchman marked Lionel U.S.A. as is the engine with unmarked car. Engine unmarked with one American flyer car and tin sign. Five piece total. Fair to poor. Not usable condition as decorations.

Double-matted and framed, NRA coin in mat. 13"x15" and 11"x18"

Canadian Silver Maple Leaf (1) 2013, (2) 2014 , (2) 2015. Canadian Polar Bear (1) 2013. Canadian Silver Moose (3) 2012 and (1) 2012 Silver Cougar coin.

Japanese made pump-action shotgun chambered for 3" 12 Gauge shells, and imported by Weatherby out of South Gate, CA. The Weatherby Model Ninety-Two was in production from 1982 until 1989. Shotgun features a blue finished barrel, black receiver, 28" ventilated rib barrel, brass bead front sight, accepts choke tubes, choke measures 'Improved Cylinder' with choke installed (measured with a drop-in gauge), fluted bolt, right receiver mounted gold-toned bolt release lever, gold-toned smooth curved trigger, annular cut cross-bolt safety on the trigger guard, dual action bars, and a knurled magazine tube cap. The gloss walnut furniture consists of a semi-pistol gripped shoulder stock with checkering at the wrist, finger grooved checkered slide handle, dark wood grip cap with an inlaid white diamond and a white spacer, 13" length-of-pull, and a solid black rubber recoil pad with a black spacer. The aluminum receiver shows limited coverage of floral scrolls on both sides of the receiver, with 'Weatherby' and 'NINETY-TWO' engraved on the left side within the scrolls. The original black finish retained is approximately 98% with very minor edge wear on the receiver, contact wear from the action, and small amount of scratches on the right side of the barrel. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright and smooth. The furniture wood is also in excellent condition with superficial handling marks. Condition is NRA Excellent. ***Modern Firearm***

Includes a ladies vintage bulova wristwatch. 10 carat rolled white gold. A silver statement ring set with black and white crystals. Taxco Mexico Sterling Ring with center quartz stone

Beige security chest. Measures: 63"H x 24"W x 17"D. No fire rating.

1) Certificate of Authenticity hand painted by Mikki Miller entitled Bull Canvasback. Limited Edition 641 of 2900. Measures 14"L x 8.5"H. 2) Certificate of Authenticity hand painted by Mikki Miller entitled Redhead. Limited Edition 482 of 2900. Measures 12"L x 8"H. 3) Certificate of Authenticity hand painted by Mikki Miller entitled Hooded Merganser. Limited Edition 191 of 2900. Measures 12"L x 7"H 4) Certificate of Authenticity handcrafted by Mikki Miller entitled Wading Cinnamon Teal. Limited Edition 338 of 2900. Measures 11"L x 6"H

Oak wine barrel wall hangings. Decorated with grapes and leaves. Two of which were made to be candle holders. One is made for hanging hats and jackets. Measures range from 37" x 7", to 37" x 5" and 38" x 4

Semi-automatic modern sporting rifle modeled after the iconic HK MP5SD, manufactured in Germany circa 2009. Features a matte black finish, 16.25" barrel with removable faux suppressor, hooded post front sight, 4-position rear drum sight, smooth trigger, ambidextrous safety, paddle & push button magazine releases, factory 22 round magazine, grooved rubber overmolded forend, knurled charging handle, scope rail installed on receiver, black polymer trigger housing with smooth pistol grip and fixed shoulder stock. Includes the original factory cardboard box with matching label, manual. Rifle retains approximately 99% of its original finish showing some scuffs with no major wear observed. Action is smooth, the bore is excellent, and the polymer is fine. NRA Condition-Near Perfect in box. Modern Firearm.

Drop down desk reveals 5 compartments, 2 small drawers. Two drawers in front 41"H x 30"W x 17"D

(1) Musha sword with a stainless steel blade, black wrapped handle, with matte black scabbard like new in the box (2) Shinwa sword with damascus steel blade, black lacquered scabbard, wrapped black handle like new in the box (3) Shinwa sword with colored damascus steel blade in red lacquered scabbard in silk lined box (4) Musha sword stainless steel blade mounted with crane decorated Tsuba, black wrapped handle like new in the box

Titled "1871 Colt". Measures: 14" x 11"

Includes (1) 2019 Canadian Silver Maple Leaf, (1) 2015 Australian Koala, (2) 2015 Chinese Silver Panda, (1) Australian Wedge Tailed Eagle, (3) Tiger Lunar Series (1) Lynx Lunar Series

Includes two U.S. Army Mountain Backpack/Rucksacks. designed for mountain Troops. Both are complete with a metal frames, waist belts and straps, both stamped "U.S." on the flaps, 3 outside pockets on each with zippered compartments on the inside of the flaps. One marked "Avery 1943". Complete, very good conditions. Also included is a British WW2 British Bren Gun P-37 Web Spare Barrel/Parts Bag, inside of flap marked "C.P. Ltd. 45" with Broad Arrow. very Good, complete and a parka cold weather jacket from Tennier Industries. Designed for military use, features a universal camouflage pattern and is made in the United States. The jacket is a men's size X-Large, Long.

#19070183 Turkish made over/under box-lock shotgun chambered for 3" 12 Gauge shells, and imported by American Tactical out of Summerville, SC. The American Tactical Cavalry SxE was originally imported from 2013 until 2019, and was later reintroduced in 2021. Shotgun features a matte blue barrel finish, matted aluminum receiver, approximately 28" ventilated rib chrome-moly steel barrels, accepts choke tubes, bores measure 'Modified' on top and 'Improved Cylinder' on the bottom (measured with a drop-in gauge), brass bead front sight, checkered sliding tang safety/barrel selector, smooth curved silver-toned trigger, shell ejectors, smooth top lever, and a matte black aluminum trigger guard. The oil finished Turkish Walnut furniture consists of a semi-pistol gripped shoulder stock with checkering at the wrist, checkered Schnabel forend with a Deeley latch release, 14-1/2" length-of-pull, 1-1/8" drop at comb, 1-3/4" drop at heel, and a solid black rubber recoil pad with a white spacer. The aluminum receiver displays limited coverage of floral scrolls with game bird scenes on both sides and the bottom. The original blue finish retained is approximately 99% with nothing remarkable. Metal displays no rust, or deformation. Action is tight and like-new with the barrels needing help to open completely, and the top lever rests to the right of the tangs centerline. The bore is bright and smooth, and the furniture wood is in excellent condition with little to speak of. Condition is NRA Excellent. ***Modern Firearm***

Great example of 10th Mountain Division ski equipment. A pair of wood skis manufactured by Dovre. The center of the skis are marked: U.S. with dates covered by the top metal fittings. Metal boot insert stamped DOVRE (STAMPED VERTICALLY) "1943 U.S." Original white snow camouflage paint, the underside of the wood at the top is Stamped "Derby & Ball, Waterbury VT. Skis measure 86". Complete with bindings and poles, no straps. The webbing on one of the poles is damaged, repairable. Activated in 1943, the 10th Mountain was uniquely trained in skiing, mountain climbing, and surviving arctic conditions. Deployed to Italy in 1945, they broke the formidable German Gothic Line, suffering heavy casualties but spearheading the Allied victory in the Apennine Mountains and Po Valley.

Vintage cameo pin with a pair of dangling opal earrings

Including a sterling chain. Two costume jewelry rings and a brown glass pendant marked MX.

1) is an oak wine barrel with 7 recess mounted glass containers. Measures 35-1/2H x 5-1/2W. 2) Wine barrel custom made wall hanging with two metal shelves for spices or other small items. Measures 26"H x 9"W

American made double action semi-auto 15 shot pistol with ambidextrous decocking/safety lever. 3rd-generation "Wonder Nine" produced from 1989 to 1999. Known for its durability, Stainless steel construction, black checkered rubber grips, 4" barrel with dovetailed 3 white dot drift adjustable sights. Bore is excellent/bright, SS finish has a few minor scratches, grips are excellent. Comes with one 15 rd magazine and one blued 32 rd magazine. NRA Condition-Near Excellent. Modern Firearm. 'NOT CALIFORNIA LEGAL"

Manfrotto Model 290 Tripod with 128RC QR Micro Fluid Head, includes carry bag & no plate. & Caldwell 7-Rest rifle shooting rest.

Entitled "The Duke". Measures: 25" x 19". 1951 Birmingham, Alabama - 2016 Tucker, Georgia. Known for: Theater lighting director and costume designer.

American made semi-automatic tube-fed rimfire rifle chambered for .22 Long Rifle only, and manufactured circa 1975 in North Haven, CT. Marlin's model 60 was in continuous production from 1960 until 2020, and it has been one of the most popular firearms of its kind. Rifle features a blued finish, matte black finished aluminum receiver and trigger guard, an approximately 22" round barrel with Micro-Grooved rifling, full-length magazine tube under barrel, raised blade front sight, elevation adjustable rear sporting sight, 3/8" dovetailed receiver for scope mounting, serrated curved silver-toned trigger, smooth charging handle, and an annular cut trigger guard mounted push-button safety. The hardwood furniture consists of a semi-pistol gripped shoulder stock with serrations, and a squirrel in a pentagon on the wrist. The forend has serrated texturing and boxed oak leaf designs, and the shoulder stock has a checkered black plastic butt plate. A Glenfield fixed 4x15mm 'Opti-Centered' scope with plain crosshairs is mounted on the receiver using two-piece 3/4" rings. The original matte black finish retained is approximately 90% with edge wear, chipping paint, and handling blemishes. Metal displays minor deformation in some of the screw slots, and scattered light rust on the barrel and magazine tube. Furniture wood is in good condition with handling marks and edge wear, and the action is smooth and crisp. The bore looks bright with strong rifling. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

American made vintage semi-automatic centerfire rifle chambered for .30-30 Remington, and manufactured by Remington Arms Co. out of Ilion, NY. Remington arms introduced the 'Remington Autoloading Rifle' in 1905, and the name later changed to the 'Model 8' in 1911. These rifles were produced until 1936. Rifle features a blued finish, an approximately 22" recoiling barrel, dovetailed blade front sight, rotating bolt head, last-round bolt hold open, elevation adjustable semi-buckhorn rear sight (missing elevator), smooth curved trigger, fixed 5-round magazine, checkered bolt release, take-down lever under the forend, checkered lever style safety on the right side of the receiver, and smooth charging handle. The hardwood furniture consists of a smooth straight gripped shoulder stock, smooth forend, an a factory checkered black plastic butt plate. The original blued finish retained is approximately 40% with general thinning, handling blemishes, and the finish is taking on a mottled gray to plum patina. Metal displays some pin-prick pitting, deformation in some of the screw slots, and rust inside of the magazine. Wood is in fair condition with a crack in the forend, and normal handling marks. Action is smooth and crisp, and the bore is bright with strong rifling. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

Original move poster for "Diamonds are Forever" starring Sean Connery in iconic James Bond series. Artwork 30"H x 40"W and #71 of 303 with National Screen Services markings and folding from being sent to theatres in envelope. Minor damage from age and use bright colors. Frame 45"H x 30"W in wood with brass corners

Double action semi-automatic compact pistol chambered in 9x19mm. Manufactured in Germany circa 1995, and imported by Sigarms Inc. of Exeter, NH. Features black K-Kote finish, blued 3.86" barrel, dovetailed front sight with white dot, dovetailed rear sight with square notch & white bar, smooth curved trigger, serrated round hammer spur, thumb decocking lever on the left side of the frame, push button magazine release, factory 13 round magazine, alloy frame, and stippled black synthetic factory grips. Includes a spare factory 10 round magazine. Pistol retains approximately 95% of its original black finish showing light edge wear, handling marks, and finish loss on the barrel hood. The action is mechanically sound, the bore is excellent/bright, and the synthetic grips are excellent. Condition is NRA Very Good. ***Modern Firearm***

1) Bullseye pocket watch with stainless steel case. 2) Illinois watch company pocket watch with a yellow plated gold case. 3) Silver colored horse motif. All three are in unworking condition.

Canadian made magazine fed bolt action sporting rifle chambered in 22 Long Rifle. Imported by Savage Arms Inc. of Westfield, M.A. with import marks on the left side of the barrel. Features a matte black finish, 16 1/4" fluted barrel with recessed crown & no provisions for sights, threaded with protector cap, BSA "Sweet 22" 3-9x40SP scope mounted on a one-piece base, duplex reticle, adjustable Accu-trigger, manual safety on the right side of the receiver, detachable 10 round magazine, and checkered black synthetic semi-pistol grip shoulder stock, factory buttplate. Rifle retains approximately 99% of its matte finish showing very little wear. Action is smooth, the bore is pristine, optics are sharp and the synthetic stock is near fine. Comes with four spare 10-rd magazine still in the packaging. (5) total. NRA Condition-Excellent. Modern firearm.

Full mounted bobcat standing on branch and rocks. Measures 36"H x 31"W x 14"D. ***Buyer must arrange shipping***

Italian made single-action revolver chambered for .22 Long Rifle, and manufactured in 2014 ('CM' date code). Imported by Chiappa Firearms, LTD. out of Dayton, OH. Pistol features a black finished alloy frame and cylinder, a blued 12" round barrel with a 1:16" twist rate, fixed blade front sight, micrometer adjustable square notched rear sight, smooth curved trigger, frame mounted firing pin, checkered hammer spur, steel lined fluted six-round cylinder, collard cylinder pin head, smooth grip straps, bird's head style ejector rod button, and two-piece gray plastic checkered grips with a floral style symbol on both sides. The original matte black finish retained is approximately 99% with very minor edge wear on the ejector tube, and superficial blemishes. Metal displays no rust, or deformation. The action is smooth and crisp with a good lock-up, and the grip polymer is in excellent condition with little to speak of. The bore is bright with strong rifling, and the cylinder chambers are also in excellent condition. Condition is NRA Excellent. ***Modern Firearm***

Wood box is in great condition for age. Hand-crank and and bells work. Missing receiver cap. Measures: 19"H x 13"W x 12"D.

42" from base to nose, 48" H, 32" Horns

Turkish made inertia driven semi-automatic shotgun chambered for 3" 12 Gauge shells, and imported by PW Arms out of Redmond, WA. The Panzer M2 is based on the Benelli M2's design, and this may be the 'Field Grade' with tactical furniture. Shotgun features a matte black finish, serrated and dovetailed receiver for optic mounting, an approximately 28" vent rib barrel, accepts choke tubes with a 'Modified' choke installed, brass bead front sight, half-length 3-round magazine tube, serrated charging handle, annular cut push-button manual safety on the trigger guard, smooth push-button bolt release mounted on the right side of the receiver, sling stud on the magazine tube cap, serrated manual bolt stop on the right side of the trigger guard, and a smooth curved trigger. The black polymer furniture consists of a finger grooved pistol gripped shoulder stock with granular texturing, finger grooved checkered forend, sling stud on the bottom of the shoulder stock, 14" length-of-pull, and a black ventilated rubber recoil pad. The original matte black finish retained is approximately 96% with mostly light scratches that do not expose bare metal. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright and smooth. Furniture polymer is in excellent condition with nothing remarkable. Condition is NRA Very Good. ***Modern Firearm***

Vintage American made pump-action shotgun chambered for 2-3/4" 12 Gauge shells, and manufactured circa 1927 in New Haven, CT. Shotgun features a blued finish (receiver appears to be refinished), an approximately 30" solid rib barrel, barrel marked 'Full' choke, brass bead front sight, steel mid-bead, smooth curved trigger, hammerless, about 1/2 length magazine tube, front trigger guard mounted checkered push-button safety, single action bar, and left side receiver mounted push-button slide release. The refinshed hardwood furniture consists of a semi-pistol gripped shoulder stock with checkering at the wrist, grooved corn-cob style slide handle, 14-1/4" length-of-pull, and a brown ventilated Pachmayr rubber recoil pad with black spaces. The blued finish retained is approximately 98% with superficial handling marks. The receiver is dull black in color, the edges are soft, and there's a shallow Winchester mark on the top of the receiver. The rest of the shotgun's markings are sharp. Metal displays rust inside the receiver, and there appears to be minor deformation in some of the screw slots. The action is smooth and crisp, and the bore is shiny and bright, but a little dirty. The wood furniture is excellent as refinished. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

American made sporterized military contract bolt-action service rifle chambered for .308 Norma Magnum, and manufactured circa 1942. Rifle features a high polish blued finish, receiver drilled and tapped for optic mounting (two sets of mounting holes), stripper clip guide cut into the receiver, 24" tapered barrel, hooded Redfield ramped blade front sight with a brass insert, no rear sight installed, flag type manual safety on bolt shroud, 5-round internal box magazine with a military style floorplate, serrated magazine cut-off on the left receiver rail, serrated curved trigger, jeweled bolt body, turned-down and swept-back polished bolt handle, knurled cocking piece, and a machined trigger guard. The hardwood furniture consists of a smooth semi-pistol gripped Bishop Monte Carlo style shoulder stock, smooth schnabel forend with a sling stud, sling stud on the bottom of the shoulder stock, checkered black plastic double diamond grip cap with a white spacer, right-hand cheek weld, and black ventilated rubber recoil pad with white and black spacers. The original blued finish retained is approximately 97% with light handling blemishes, and the finish is taking on a plum color. Metal displays no deformation, but there are a few very small and light spots of oxidation on the barrel and front sight base. Action is smooth and crisp, and the bore is bright with strong rifling. The furniture wood is in very good condition with dark areas from skin oils, light and small scratches, and a couple of small dings. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

'Short Action', an American bolt-action centerfire rifle chambered for 7mm-08, and manufactured circa 1981 ('PB' date code) in Ilion, NY. The Remington 700 Better Deluxe (BDL) was introduced in 1962. Rifle features a blued finish, receiver drilled and tapped for optic mounting, an approximately 24" tapered heavy barrel, no provision for iron sights, hinged floorplate, serrated right receiver mounted manual safety, 'jeweled' bolt body, swept back bolt handle with checkered knob, aluminum trigger guard, and a serrated curved trigger. The walnut furniture consists of a semi-pistol gripped Monte Carlo style shoulder stock with skip-line checkering at the wrist, skip-line checkered forend, right-hand cheek piece, black forend tip with white spacer, checkered plastic grip cap with a white spacer, and a black factory solid rubber recoil pad with a black spacer. A single piece Redfield mounting base without rings is attached to the receiver. The original blued finish retained is approximately 99% with minor scratches, and superficial handling blemishes. Metal displays no rust, or deformation. Furniture wood is in near excellent condition with a few minor handling blemishes. The action is smooth and crisp, and the bore is bright with strong rifling. Condition is NRA Near Excellent. ***Modern Firearm***

Turkish made tube-fed pump-action shotgun chambered for 3" 12 Gauge shells, and imported by GForce Arms out of Reno, NV. The GF3 PAX 12 was manufactured by Francolin, Turkey. Shotgun features a matte black finish, serrated and dovetailed receiver for optic mounting, an approximately 20" round barrel, fixed 'Cylinder' choke, fixed blade front sight, 2/3 length magazine tube, knurled magazine tube cap, triangular serrated push-button manual safety on the trigger guard, serrated push-button bolt release mounted in front of the trigger guard, polymer trigger guard, and a smooth curved trigger. The black polymer furniture consists of a finger grooved pistol gripped shoulder stock with granular texturing, finger grooved granular textured slide handle, 3" picatinny accessory rail on the bottom on the slide handle, dual operating rods, shell holder on the bottom of the shoulder stock, 14-1/2" length-of-pull, and a serrated solid black rubber recoil pad. The original matte black finish retained is approximately 97% with mostly light scratches that do not expose bare metal, and some light edge wear. Metal displays no rust, but there is slight deformation on the trigger guard. Action is smooth and crisp, and the bore is bright and smooth. Furniture polymer is in very good to excellent condition with some light scrapes on the left side of the slide handle. Condition is NRA Very Good. ***Modern Firearm***

American made single-shot bolt-action benchrest target rifle chambered for 6mm PPC (Palmisano-Pindell Cartridge), and manufactured by Wichita Arms Company. Rifle features a blued receiver, receiver drilled and tapped for optic mounting, an approximately 23" stainless steel heavy barrel with a recessed crown (Robert W. Hart & Son), no provisions for iron sights, right-hand swept back bolt with a checkered knob, left-hand ejection, two-piece steel mounts and 1" rings, and a 2 Oz. adjustable curved wire trigger. The hardwood furniture consists of a smooth semi-pistol gripped shoulder stock, smooth wide flat bottomed foend, 13-1/4" length-of-pull, and a smooth wood capped butt plate. The action has been bedded, and the trigger guard is fitted with one screw. The original stainless finish retained is approximately 96% with some edge wear at the muzzle, light scratches, and some heavier scratches that can be felt with a finger nail on top of the barrel. The blued finish retained is approximately 99% with little to speak of. The trigger guard has a small scratch on it. Metal displays no rust, or deformation. The action is smooth and crisp, and the bore is bright with strong rifling. Furniture wood is in good to very good condition with small scratches and impressions. Condition is NRA Very Good. ***Modern Firearm***

Polychrome 3 color pot with bear and geometric design, signed on base Roberta H Trujillo "Sky", 13 inches tall by 21 inches wide

(1) Shinwa sword with black wrapped handled, black Tsuba, burgundy lacquered scabbard, with damascus steel blade like new in the box (2) Shinwa sword with a monkeys on the Tsuba, black lacquered scabbard, brown wrapped handle, satin cover, like new in the display box (3) Shinwa sword with orange carbon steel blade, faux leather black wrapped handle, lacquered scabbard, like new in the box (4) Shinwa sward with damascus steel blade, faux white leather wrapped handle, black lacquered scabbard, like new in a satin lined display box

10k Yellow Gold Plated

1) Counter Punch by Nicolas Trudgian. Signed by the artist and includes additions with autographs of the some of the following WWII veterans. Limited Edition #27 of 100. Measures 32"W x 22-1/2H. 2) Come Up and Fight by Gareth Hector. Signed by the artist and WWII corsair pilots. Artist proof #27 of 75. Includes reproduced photographs and pins. Measures 32W x 22-1/2H. Both prints are unframed and preserved in tube.

'Helwan Brigadier,' an Egyptian made single-action semi-automatic pistol chambered for 9x19mm Luger, and imported by Interarms out of Alexandria, VA. This is an Egyptian made copy of the Beretta 1951 'Brigadier.' Import marks are on the left dust cover. Pistol features a blued finish, 4.5" barrel, full-length metal guide rod, fixed blade front sight, dovetailed square notched rear sight, solid smooth curved trigger, checkered push-button safety at the top of the grips, external ring hammer with a serrated spur, serrated slide stop, serrated take-down lever on the right side of the frame, checkered push-button magazine release near the heel of the grip, accepts 8-round magazines, magazine disconnect, lanyard loop on the heel of the grip, and two-piece grooved black plastic wrap-around grips. The slide's serial numbers match the frame. The original blued finish retained is approximately 15% with handling blemishes, and the original finish nearly being cleaned from the firearm. Metal displays no deformation, but there is light oxidation forming for the lack of a metal finish. Action is smooth and crisp, and the bore is bright with strong rifling. The grips polymer is in very good condition with very light handling wear. Pistol includes one magazine total. Condition is NRA Fair. ***Modern Firearm***

'Eastern Carbine', a vintage American made lever action repeating rifle chambered for .30-30 Winchester, and manufactured circa 1950 in New Haven, CT. 'Eastern Carbine' refers to a rifle without a saddle ring, and were at one time, produced for the eastern portion of the country. Carbine features a blued finish, an approximately 20" round barrel, full-length tube magazine, hooded ramped blade front sight with a steel bead, elevation adjustable semi-buckhorn rear sight, smooth curved trigger, external hammer with a serrated spur, steel receiver, lower tang mounted lever safety, and top ejection. The walnut furniture consists of a smooth straight gripped shoulder stock, smooth forend with barrel band, and a checkered steel butt plate. The original blued finish retained is approximately 92% with some general thinning on the receiver and lever, edge wear, minor blemishes, and the receiver has scattered patches of a brown patina. Metal displays a very light amount of rust on the lever, minor deformation in the top tang screw slot, and a small deep scratch on the bottom of the magazine tube. Furniture wood is in good condition with normal handling marks. Action is smooth and crisp, and the bore is bright with strong rifling. Markings are sharp and legible. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

'Model 44 Ideal', a vintage American made single-shot falling-block rifle chambered for .22 Long Rifle, and manufactured in Chicopee Falls, MA circa 1896-1933. Rifle features a blued refinish, an approximately 24-1/2" half-octagon barrel, dovetailed blade front sight, elevation adjustable sporting rear sight, shell extractor, tang drilled and tapped for vernier sight, smooth curved trigger, curved trigger guard action lever, and a checkered hammer spur. The walnut replacement furniture consists of a smooth straight gripped shoulder stock, right hand cheek piece, smooth Schnabel forend, and a smooth metal butt plate. The blued refinish retained is approximately 98% showing superficial scratches, and light handling blemishes. Metal displays very minor deformation in some of the screw slots, and there are spots of oxidation and pitting observed. Action is smooth and crisp, and the bore shows decent rifling with some oxidative speckling. The walnut furniture is not original, and the condition is excellent with superficial blemishes. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

American made direct gas impingement semi-automatic modern sporting rifle chambered for 5.56x45mm NATO, and manufactured in Lake Havasu City, AZ. Rifle features matte black polymer receivers, a 16" medium contour barrel with a 1/8 twist rate, A2 bird cage style flash suppressor, staked low-profile gas block with set screws, no iron sights installed, carbine-length gas system, 10" free float M-Lok handguard with top picatinny accessory rail, spring loaded dust cover, shell deflector, annular cut bolt assist, annular cut push-button magazine release, flared magazine well, smooth receiver mounted manual safety, serrated paddle bolt release, smooth curved single-stage trigger, oversized integral trigger guard, A2 style finger grooved checkered pistol grip, Mil-Spec charging handle, M16 style bolt carrier, staked gas key, dual sling loop end plate, Mil-Spec buffer and buffer spring, Mil-Spec synthetic 6-position receiver extension, and a M4 style adjustable stock with a sling swivel. A Sig Sauer Romeo5 and 3x Juliet3 (red dot and magnifier) set-up is mounted using a high rise mount for the red dot, and a quick detach PowerCam 90 Degree mount for the magnifier. The matte black finish (barrel is likely nitrided) retained is approximately 99% with a very small nick on the front of the handguard. Metal displays no rust, and no deformation. Action is smooth and crisp, and the bore is bright with strong rifling. The furniture polymer is in excellent condition. The red dot set-up works well. Rifle does not include magazines. Condition is NRA Excellent. ***Modern Firearm**

1) Navajo turquoise ring. Size 8 2) Navajo turquoise ring. Size 7 3) Navajo turquoise ring. Size 6

American made standard weight semi-auto shotgun chambered for 2-3/4" 12 Gauge shotshells, and manufactured in Utica, NY. This is a vintage shotgun designed by John Moses Browning, and manufactured between 1940 and 1949. This is a copy of the Browning Auto-5, considered the deluxe grade, the receiver depicts engravings of a hunting scene with a dog and birds in a marsh. Shotgun features a matte black aluminum receiver (appears to be a painted refinish), a 26" refinished blued barrel, fixed choke measures 'Improved Cylinder' with a drop-in gauge, brass bead front sight, smooth curved trigger, sderrated charging handle, annular cut bolt release on the right side of the receiver, knurled magazine tube cap with a sling stud, and an annular cut cross-bolt safety at the rear of the trigger guard. The hardwood furniture consists of a semi-pistol grip shoulder stock with checkering at the wrist, checkered and finger-grooved forend, sling stud at the bottom of the shoulder stock, 14-3/4" length-of-pull, and brown ventilated rubber recoil pad. The blued barrel finish retained is approximately 99% with light handling blemishes. The aluminum metal finish retained is approximately 97% with light edge wear, and a few small nicks. Metal displays light oxidation on the charging handle, and minor deformation in one of the screw slots. The action is smooth and crisp, and the bore is smooth and shiny. The hardwood furniture is in very good condition with minor handling blemishes, and some thinning finish. Condition is NRA Good - as Refinished. ***Modern Firearm - C&R Eligible***

American made single-shot bolt action rimfire rifle chambered for .22 Short, Long, or Long Rifle ammunition, and manufactured in New Haven, CT. Model B was produced from 1930 until 1932 as Mossberg's first single-shot firearm. Rifle features a blued refinish, approximately 22" round tapered barrel, dovetailed blade front sight with white paint, elevation adjustable rear sporting sight, smooth curved trigger, turned down bolt handle, two-piece bolt with a stepped cocking knob (manual cocking), metal trigger guard, and a knurled take-down screw. The walnut-finished birch wood furniture consists of a smooth semi-pistol gripped shoulder stock, smooth forend, and a smooth metal butt plate. The blued finish retained is approximately 80% with edge wear, handling blemishes, and the finish taking on a mottled blue/brown patina. Metal displays no deformation, but there was scattered pin-prick pitting observed on the rifle's entirety. The action is smooth and crisp, and the bore is bright showing wear and slight peppering. Furniture wood is in fair to good condition with scattered handling blemishes, and a small crack behind the receiver. Most of the markings are sharp and clear. Condition is NRA Fair to Good. ***Modern Firearm - C&R Eligible***

American made single-shot rolling block rifle chambered for .32 Rimfire, and manufactured by Remington Arms Co Ilion, NY. Remington No, 2 Rolling Blocks were produced from 1873 to 1910, and there is no specific date to determine antiquity. Rifle features color-case hardened receiver and trigger guard, an approximately 26" blued octagonal barrel, dovetailed blade front sight, elevation adjustable sporting rear sight, smooth curved trigger, checkered breech block spur, and a checkered hammer spur. The refinished walnut furniture consists of a smooth straight gripped "perch-belly" shoulder stock, smooth Schnabel forend with a black contoured metal cap, and a curved steel butt plate. The original blued finish retained is approximately 86% with edge wear, handling blemishes, and the finish taking on a mottled brown patina. The color-case finish retained is approximately 30% with a couple faint scratches, and slight color brilliance remaining. Metal displays few very small spots of rust, and no deformation was observed. The bore is dark and dirty where rifling cannot be determined. Metal markings are sharp and legible. Furniture wood is in very good condition, as refinished, with no cracks. There is finish residue on the forend cap. Action is smooth and crisp, and the bore is frosty with visible rifling. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

American made tube-fed semi-automatic rimfire rifle chambered for .22 Short, Long, or Long Rifle. Manufactured in New Haven, CT. circa 1967 - 1980. Rifle features a blued finish, black finished aluminum receiver, an approximately 20-1/2" round barrel, dovetailed blade front sight, elevation adjustable sporting rear sight, smooth curved trigger, aluminum trigger guard, full-length magazine tube under barrel, 'push-in' charging handle manual bolt hold open, and an annular cut push-button safety on trigger guard. The walnut finished hardwood furniture consists of a smooth semi-pistol gripped shoulder stock, smooth forend with flat sides by the receiver, and a serrated black plastic factory butt plate with a red spacer. The original black finish retained is approximately 87% with scratches on the barrel and receiver, finish losses by the rear sight, and thinning on the left side of the barrel. Metal displays a bent charging handle, and sparse oxidative speckling was observed on the barrel and magazine tube. Bore is bright with visible rifling, and the action is smooth and crisp. Furniture wood is in good condition with flamed portions of the furniture, faint spotting, and the butt plate spacer should be replaced. The exact date of manufacture cannot be determined. Condition is NRA Good. ***Modern Firearm***

50" From Horn To Base, 24. From Base To Nose, 32" Horns.

(1) Shinwa sword with dragons on the tsuba, white lacquered scabbard, white wrapped handle with a colored damascus steel blade, like new in the box (2) Shinwa sword with a square dragon tsuba, colored damascus blade, green wrapped handle, black lacquered scabbard, like new in the box (3) United Cutlery sword with matte damascus blade, faux leather wrapped with brown lacquered scabbard, like new in the box (4) Musha sword with stainless steel blade, matte black scabbard, black wrapped handle, like new in the box

American made in West Columbia, SC. This is a lot of three stripped Palmetto State Armory Px9 receivers, and they MUST be built with 'Palmetto State Armory Hybrid 9mm Uppers'. Receiver features a machined 7075-T6 aluminum forging, matte black hard-coat anodized finish, accepts Glock magazines, assembled with a propitiatory magazine catch and ejector, and no last round bolt hold-open feature. The standard AR-15 parts that are compatible with these receivers include the fire control group, bolt catch, take down & pivot pins, springs & detents, safety selector, receiver extension, and grips. 1) #X9-027311; The original matte black anodized finish retained is approximately 99% with only superficial handling marks. The metal displays no rust, of deformation. Condition is NRA Excellent - Like New. 2) #X9-027321; The original matte black anodized finish retained is approximately 99% with only superficial handling marks. The metal displays no rust, of deformation. Condition is NRA Excellent - Like New. 3) #X9-027323; The original matte black anodized finish retained is approximately 99% with superficial handling marks, and a small nick on the left-side edge of the magazine well. The metal displays no rust, of deformation. Condition is NRA Excellent - Like New. ***Modern Firearms***

Includes: 1) WW2 USMC "Pith Helmet. Pressed Fiber Sun Helmet (often called the "American pith helmet") for training, fatigue details, and garrison wear in hot and tropical climates. Has the Brass EGA affixed to the front, green interior, missing liner. Good for display. 2) US WW2 Civil Defense helmet, issued by the Office of Civilian Defense (OCD) starting in 1941. They were primarily worn by Air Raid Wardens, fire guards, and auxiliary police. Painted white with CD decal on front, complete gray web liner & chinstrap, overall excellent condition. Comes with CD armband made of sturdy paper stock resembling wall paper, it has broken past the CD emblem. Also used during the Korean War. Also included is a US WW2 canteen & belt pouch, no cup. Canteen marked "U.S. A.G.M. Co. 1942", pouch marked "Parker-Lockwood Mfg. Co.-1942.

An Italian made single-shot rolling block rifle chambered for .45-70 Government, and manufactured by Pedersoli. Imported by Navy Arms out of Ridgefield, NJ. Rifle features a color case-hardened receiver, blued 30" octagonal barrel with a brass barrel band, dovetailed blade front sight, dovetailed notched rear sight, tang drilled and tapped for a long range Creedmoor type sight, smooth curved color-case trigger, brass trigger guard, color-case breech block and hammer with serrated spurs, and a shell extractor. The hardwood furniture consists of a smooth straight gripped shoulder stock, smooth forend, and a smooth brass butt plate. The original blued finish retained is approximately 99% with small and light handling blemishes. The color case-hardened finish retained is approximately 98% with superficial marks. Metal displays no deformation, but there is sparse oxidative speckling. Action is smooth and crisp, and the bore is bright with strong rifling. The furniture wood is in excellent condition with minor marks from storage and handling. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

1) Spider design with turquoise stone. Size 8 2) Navajo ring with turquoise stone. Size 7 3) Three stone onyx ring. Size 6

'Helwan Brigadier,' an Egyptian made single-action semi-automatic pistol chambered for 9x19mm Luger, and imported by Interarms out of Alexandria, VA. This is an Egyptian made copy of the Beretta 1951 'Brigadier.' Import marks are on the left dust cover. Pistol features a blued finish, 4.5" barrel, full-length metal guide rod, fixed blade front sight, dovetailed square notched rear sight, solid smooth curved trigger, checkered push-button safety at the top of the grips, external ring hammer with a serrated spur, serrated slide stop, serrated take-down lever on the right side of the frame, checkered push-button magazine release near the heel of the grip, accepts 8-round magazines, magazine disconnect, lanyard loop on the heel of the grip, and two-piece grooved black plastic wrap-around grips. The slide's serial numbers match the frame. The original blued finish retained is approximately 85% with handling blemishes, edge wear, and friction wear on the top of the barrel. Metal displays no rust, but there is a small ding on the rear sight. Action is smooth and crisp, and the bore is bright with strong rifling (dirty bore). The grips polymer is in good condition with very light handling wear, and a small crack at the top of the left grip panel. Pistol includes one magazine total. Condition is NRA Near Very Good. ***Modern Firearm***

Italian made Single-Action Army style six-shot revolver chambered for .45 Colt cartridges, and imported by Cimmarron Firearms Co. out of Fredericksburg, TX. This is a copy of a Colt Single Action Army, and it has been represented in several western movies such as, 'A Fist Full of Dollars', and 'Man with no Name'. Revolver features a blued and case-colored finish, an approximately 4.75" round barrel, fixed blade front sight, notched top strap rear sight, thin smooth curved trigger, serrated hammer spur, beveled fluted cylinder, collard cylinder pin head, Bird's head style ejector button, smooth grip straps, and smooth red-toned walnut grips. The original blued finish retained is approximately 99% with very minimal edge wear at the muzzle, a light drag line on the cylinder, and superficial blemishes. The case-colored finish retained is approximately 99% with little to speak of. Metal displays no rust, or deformation. The wood grips are in very good condition with a couple very light blemishes, and edge wear at the heel of the grip. Bore looks bright with strong rifling, and the action is smooth and crisp with a tight lock-up. Revolver includes the original factory cardboard box with end label, and owner's manual. Condition is NRA Excellent. ***Modern Firearm***

American made single-shot falling block youth take-down rifle chambered in .22 Long Rifle, and manufactured between 1893-1939 in Chicopee Falls, MA. The Stevens favorite is based on the Martini falling block action Rifle features a color-case receiver and action lever, an approximately 22" 2/3 round and 1/3 blued octagonal barrel, dovetailed blade front sight, dovetailed flip-up 'V' notched rear sight, smooth curved trigger, shell extractor, sling swivel on take-down screw forward of trigger guard, and checkered hammer spur. The hardwood furniture is oil finished and composed of a smooth straight wrist shoulder stock, smooth Schnabel forend, and a black checkered hard rubber butt plate. The original blued finish retained is approximately 94% with handling blemishes, and the finish taking on a mottled brown patina. The case-color finish on the remaining parts are approximately 40% with some edge wear, and the finish taking on a mottled brown patina as well. Brilliant color-case coloring can still be seen on the receiver. Metal displays no deformation, but rust and pitting was observed. The action is smooth and crisp, and the bore shows rifling and oxidative speckling. Wood furniture is in good to very good condition with very light handling marks, and a cracked butt plate. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

Vintage American made single-shot falling block rifle chambered for .25-20 Single Shot, manufactured from the late 1800's until the early 1900's. Rifle features a blued barrel and action lever with a color-case receiver, an approximately 26" octagonal barrel, dovetailed Globe front sight with a post insert, rear sight dovetail (sight removed), shell extractor, tang drilled and tapped for vernier sights, takedown screw under receiver, smooth curved trigger, elaborate combination trigger guard and action lever, and a checkered hammer spur. The refinished hardwood furniture consists of a smooth semi-pistol gripped shoulder stock, smooth forend, and a nickeled Swiss butt plate. The original blued finish retained is approximately 96% with edge wear, minor handling blemishes, and the finish starting to take on a brown patina. The color-case finish retained is approximately 97% with very light scratches, and most of the brilliant colors remain. Bore is bright with strong rifling, and the action is smooth and crisp. Furniture wood is in is good condition as refinished, the furniture does not appear to be original, and has minor handling blemishes. Condition is NRA Good - With Furniture condition/replacement. ***Modern Firearm - C&R Eligible***

'ADL,' an American made bolt-action sporting rifle rechambered for .338 Winchester Magnum, and manufactured circa 1968 ('CR' date code) in Ilion, NY. Rifle features a blued finish, receiver drilled and tapped for optic mounting, 22" tapered stainless steel barrel, iron sights removed, serrated curved trigger, blind magazine, turned down and swept back bolt handle witha checkered knob, serrated right tang mounted manual safety. The hardwood Monte Carlo furniture consists of a semi-pistol gripped shoulder stock with press checkering at the wrist, press-checkered forend with a sling stud, right-hand cheek piece with a sling stud on the bottom of the shoulder stock, and a black factory ventilated rubber recoil pad with white and black spacers. A Redfield 3-9x50mm scope with a duplex reticle is mounted to the rifle using a Redfield mount and two-piece 1" rings. The original blued finish retained is approximately 99% with superficial handling blemishes. Metal displays no deformation, and no rust. Action is smooth and crisp, and the bore is bright with strong rifling. The furniture wood is in excellent condition with minor handling marks. The scope's sight picture is clear and bright. Condition is NRA Excellent. ***Modern Firearm - C&R Eligible***

American made Vintage bolt-action sporting rifle chambered for .30-06 Springfield. This rifle was built on a US military Model 1917 action, and modified the original 1917 furniture. Rifle features a blued finish, receiver drilled and tapped for optic mounting, an approximately 24" tapered barrel, raised blade front sight with a brass bead, no rear iron sight, fixed magazine with military style floorplate, "Dog Leg" bolt handle, serrated right receiver mounted manual safety, serrated curved trigger, left receiver rail mounted bolt release, and a metal trigger guard. The modified walnut furniture consists of a smooth straight gripped shoulder stock with hand stop, smooth finger grooved forend, sling swivels at the front of the forend and the bottom of the shoulder stock, no handguard, and a brown Pachmayr ventilated rubber recoil pad with a black spacer. A vintage Revelation 4x32mm (4G5150, made in Japan) rifle scope with fine crosshairs is mounted using a single piece Redfield mount with 1" rings. A flaming bomb is marked on the left receiver rail. The original blued finish retained is approximately 15% with blemishes, and most of the finished cleaned. Metal displays no deformation, but the rifle shows sparse scattered oxidative speckling. Furniture wood is in good condition with a repair to the top of the shoulder stock leaving a visible screw, and a few handling blemishes. Action is smooth and crisp, and the bore is pretty bright with decent rifling. There may be some marking on the furniture by the wrist, but they are faint. Scope's sight picture is bright with a slight yellowing. Rifle includes a brown leather sling. Condition is NRA Near Good. ***Modern Firearm - C&R Eligible***

American made semi-automatic magazine fed rimfire rifle chambered for .22 Long Rifle, and manufactured in Ilion, NY. Remington Model 522 Viper was in production From 1993 until 1998. Rifle features a blued barrel and a matte black polymer receiver, serrated receiver dovetail for optic mounting, an approximately 20" round barrel, raised blade front sight with a silver-toned bead, elevation adjustable rear sight (incomplete), smooth curved trigger, annular cut push-button safety mounted on trigger guard, smooth magazine release mounted inside magazine well, magazine disconnect type feature, and a combination bolt knob and bolt stop (manual push type). The black synthetic furniture consists of a semi-pistol gripped shoulder stock with checkering at the wrist, smooth wide contoured forend, and an integrated checkered butt plate. A Tasco Pronghorn 4x32mm scope with a duplex reticle is mounted to the receiver utilizing two-piece 1" rings. The original blued finish retained is approximately 92% with losses at the muzzle, and handling blemishes. Metal displays no deformation, but there is some light oxidative peppering, and pitting at the muzzle. Action is smooth and crisp, and the bore is bright with strong rifling. Furniture polymer is in near excellent condition with superficial blemishes. The scope's sight picture is bright with slight yellowing. Rifle includes one magazine total. Condition is NRA Fair. ***Modern Firearm***

American made in West Columbia, SC. This is a lot of three stripped Palmetto State Armory PA-15 receivers, and they are all marked 'MULTI' on the left side of the receiver for the chambering. Receivers features a 7075-T6 aluminum construction, a matte black hard coat Mil-8625 Type 3 class 2 anodized finish, fencing, beveled magazine well, and they are all marked 'Fire' and 'Safe' around the safety lever on both sides of the receiver. 1) #SCD661515; The original matte black anodized finish retained is approximately 99% with nothing remarkable. The metal displays no rust, of deformation. A Palmetto State Armory trademark is engraved on the left side of the magazine well. Condition is NRA Excellent - Like New. 2) #SCD661507; The original matte black anodized finish retained is approximately 99% with only superficial handling marks. The metal displays no rust, of deformation. A Palmetto State Armory trademark is engraved on the left side of the magazine well. Condition is NRA Excellent - Like New. 3) #SCD090728; The original matte black anodized finish retained is approximately 99% with only superficial handling marks. The metal displays no rust, of deformation. Condition is NRA Excellent - Like New. ***Modern Firearms***

'Tamer', an American made single-shot break action shotgun chambered for 3" 20 Gauge shells, and manufactured in Gardner, MA. The Tamer is basically H&R’s Topper shotgun with a shorter barrel and shoulder stock. The 20 Ga. Tamer was introduced in 2007 and discontinued in 2014. Shotgun features a matte electroless nickel finished receiver, an approximately 25-1/2" round blued barrel, 'Modified' fixed choke, brass bead front sight, shell extractor, smooth curved trigger, external hammer with a serrated spur, smooth action lever mounted to the right of the hammer, and a polymer trigger guard. The black polymer furniture consists of a thumbhole shoulder stock with checkering on the grip, 3-round shell holder on the right side of the stock, serrated shoulder stock butt, 12" length-of-pull, and a smooth forend. The original matte nickel finish retained is approximately 98% with superficial scratches. The original blued finish retained is approximately 96% with light edge wear and handling blemishes. Metal displays no deformation, but there is light oxidative peppering along the barrel. The action is smooth and crisp, and the bore is bright and shiny. Furniture polymer is in good to very good condition with very light handling marks, and edge wear. Condition is NRA Good. ***Modern Firearm***

late 19th/early 20th century, a Knights Templar sword made by Ames. Freemasonry bronze and silvered-metal sword, with black leather 3 ring sheath with silvered-metal fittings inscribed 'In hoc Signo' with image of snake wrapped around a cross on the throat, the sword blade etched " Newburyport Commandery', (Newburyport Commandery No. 3 is one of the oldest Masonic Knights Templar organizations in the U.S.. Originally organized in Newburyport, Massachusetts, in 1795 and formally chartered on May 19, 1808, it holds a deeply significant place in American Masonic history) on the other side the owner's name 'Royal H. Stevens',"In hoc signo vinces" (Latin for "In this sign, you will conquer") is the primary motto of the Knights Templar, an order of Freemasonry. Knight's head pommel, rooster on crossguard (deeply symbolic bird representing vigilance, preparedness, and the dawning of a new day), chain hand guard. No cross on the grips. overall very good condition. Antique or vintage Newburyport Commandery Masonic swords, particularly those manufactured by the historical Ames Sword Co. (Chicopee, Massachusetts), are very rare, highly sought-after swords. We could not find one for sale.

Vintage American made single-shot bolt action rimfire rifle chambered for .22 Short, Long, and Long Rifle. The Model 15 was produced in Chicopee Falls, MA. from 1937 to 1947 under the Springfield name. Many of these rifles were manufactured for department stores like Montgomery Wards, J.C. Penny, Cotter & Co., etc. Rifle features a blued finished single-piece barrel and receiver construction, approximately 22" barrel (rifled portion of firearm), fixed blade front sight, elevation adjustable sporting rear sight, smooth curved trigger, metal trigger guard, turned down bolt handle, knurled cocking knob (manually cocked), and no manual safety. The Birchwood furniture consists of a semi-pistol gripped shoulder stock, smooth forend, and a smooth stock butt with no plate or recoil pad. The original blued finish retained is approximately 95% with light edge wear, and minor handling marks. Metal displays slight deformation in the rear sight screw slot, and oxidative speckling was observed along the barrel and receiver. Action works very well, and the bore is bright with strong rifling. Furniture wood is in good condition with scattered handling blemishes, and thinning finish at the pistol gripped and butt. Condition is NRA Near Good. ***Modern Firearm - C&R Eligible***

1) Beaded pipe bag with fringe, native american made, 20th century type, 21 inches long by 6 inches wide 2) Beaded native american possibles bag with fringe, 8.5 inches by 4.5 inches 3) Buckskin and beaded bag with fringe, 7 inches by 5 inches

Yugoslavian made military semi-automatic rifle chambered for 7.62x39mm ammunition, and imported by Century Arms International out of Georgia, VT. Zastava manufactured 132,081 M59/66s and M59/66A1s between 1966 and 1971. The M59/66 included grenade launching features, and the 'A1' included the flip-up night sights. Rifle features a blued finish, a 22" barrel (24" with the installed grenade spigot/muzzle brake), fully adjustable protected post front sight, rear tangent sight graduated to 1,000 meters, flip up three dot "low light" sights, smooth curved trigger, knurled charging handle, stripper clip guides cut into to bolt carrier, cleaning rod under barrel, folding blade bayonet, flip-up grenade launching sights, sling loop on the gas block, 10-round hinged box magazine with a serrated release latch at the rear, and a serrated manual safety inside the trigger guard. The hardwood furniture consists of a smooth semi-pistol gripped shoulder stock, smooth finger grooved forend, smooth ventilated hand guard, sling loop on the bottom of the shoulder stock, solid black rubber recoil pad, trap door storage compartment with cleaning gear inside, and the stock is stamped "184982". Serial numbers 'G-184982' match on the bolt, bolt carrier, receiver, magazine, trigger guard, and stock. The original blued finish retained is approximately 92% with light scratches, minor edge wear, and some thinning on the magazine. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. The furniture wood is in very good condition with normal storage marks, and handling blemishes. Rifle includes a green web sling. Condition is NRA Very Good. ***Modern Firearm - C&R Eligible***

1) Marquee cut purple stone. Size 8 2) Round cut yellow stone. Size 8

Meprolight, M22, Reflex sight. With light module and kill flash

Vintage lever action rimfire rifle. Manufactured circa 1959-1962, no serial number or barrel code. Features blued finish, gold toned trigger, wood stock with curved grip area, checkered Marlin plastic buttplate, grip cap, 24" barrel, full length magazine tube under barrel, sporting sights with ramped blade/bead front sight, receiver drilled/tapped for optics, manual safety also locks finger lever. Bore is very good/bright, retains about 95% blue with scratches, bare metal showing on sharp edges, stock is very good condition with a few minor scratches. Condition is NRA Very Good +. C&R Firearm.

Reproduction Claymore sword. Scottish variant of the late medieval two-handed sword. V-shaped crossguard that slops downward, ending in decorative, clover-like quatrefoil designs with langets running down the center of the blade from the guard. Massive sword that measures 55" overall with a 40 1/2" blade and a 9 1/4" black leather coved grip. Large round pommel. Comes with thick brown leather with 4 buckles for straps, the scabbard is 4" shorter than the blade, (Correct) typically shorter than the blade primarily for faster drawing because these swords were so long. Both in excellent condition.

Misc. lot of tools in "Ideal" box. A) 12GA Ideal de-capper and sizer. B) Ornate brass and blued steel de-capper with gun portrait and Pat. April 23, 78. Near fine. C) CarR medium size de-capping tool. Fair. D) Nickel-plated rifle caliber capping tool. Fair. E) Ideal pocket loader in box. Near fine. Plus high quality brass and wood shotgun case sizer.

Features 4 wagon wheels with a center pine seat. Live edge seat back and foot stool. Measures 58"L x 37"W. In excellent condition.

'Featherlight', an American made slide-action repeating shotgun chambered for 2-3/4" 12 Gauge shotshells, and manufactured after 2005 in Ithaca, NY. Shotgun features a blued finish, a 28" vent ribbed barrel, orange fiber optic front sight, steel mid-bead, the fixed choke measures 'Modified' with a drop-in gauge, five-round tube magazine, smooth curved trigger, bottom eject, single action bar, serrated bolt release at the front of the trigger guard, and checkered push-button safety on the trigger guard. The walnut furniture consists of a semi-pistol grip shoulder stock with floral press checkering at the wrist, floral checkered slide handle, factory brown ventilated rubber recoil pad with white and black spacers, 14-1/2" length-of-pull, and black Ithaca grip cap with a white spacer. The receiver displays limited coverage of dog and waterfowl scenes roll stamped on both sides. The original blued finish retained is approximately 97% with light scratches, contact wear from the slide handle, and minor edge wear. Metal displays no deformation, but there is a few light spots of oxidation on the magazine tube and receiver. The action is smooth and crisp, and the bore is smooth and shiny. The furniture wood is in very good condition with light handling blemishes, a mark on the top of the shoulder stock, and small material transfers on the rear of the shoulder stock. Condition is NRA Good. ***Modern Firearm***

First is a graduated beaded necklace with shell pendant inlaid with mother of pearl and stabilized turquoise. A two strand faux coral beaded necklace with a stabilized triangle turquoise pendant.

American made replica of a vintage Hawken single-shot muzzle loading percussion plains rifle with a .50 caliber bore. This rifle is intended for black Powder (or Pyrodex or similar powder) only. Rifle was intentionally pitted for an aged and textured appearance. Rifle features a blued finish, an approximately 29" octagonal barrel, dovetailed blade front sight, fully adjustable barrel mounted rear sight, smooth curved double set triggers, elaborate brass trigger guard, wood ramrod with brass thimbles and tip under barrel, and an external hammer with a serrated spur. The refinished hardwood furniture consists of a smooth straight gripped shoulder stock, smooth forend with brass end cap, right hand cheek rest, smooth brass crescent butt plate, and brass patch box. Limited coverage of floral scrolls were applied to the hammer and lock. The blue refinish retained is approximately 96% with some minor edge wear. Metal displays no deformation, but rust was observed on the lock, hammer, front sight, and the trigger plate. Bore is bright with strong rifling, and the two-cock hammer action works well. The refinished wood furniture is in good condition with light handling blemishes. Condition is NRA Good - As Refinished. ***Antique Firearm***

(1) Japanese style sword with garden scene tsuba, black lacquered scabbard, black wrapped handle, like new in satin lined display box (2) Shinwa sword with black lacquered scabbard and handle, damascus steel blade, like new in the satin lined display box (3) United Cutlery sword with high carbon steel blade, navy blue wrapped handle, black lacquered scabbard, dragon fly on the tsuba, like new in the box (4) Shinwa sword with damascus steel blade, burgandy lacquered scabbard, with black wrapped handle, like new in the box

American made folding single-action revolver chambered for .22 Winchester Magnum Rimfire, and manufactured in New Britain, CT. The Switch Gun was introduced in 2021, and designed to have a footprint about the size of a cell phone. Pistol features a matte stainless steel construction, a 3/4" barrel, square notched frame sight, serrated spur trigger, smooth five-round cylinder, removable cylinder pin/ejection rod, external hammer with a serrated spur, serrated opening switch (opens under spring tension), smooth metal closing lever, and two piece black polymer grips with the 'Switch-Gun' trademark on the left side and the 'Standard Manufacturing' logo on the right side. The original matte stainless finish retained is approximately 99% with superficial blemishes, and a drag line on the cylinder. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. The grip polymer is in excellent condition with nothing remarkable. Pistol includes the original factory cardboard box with end label, sticker, cable lock, gun oil, and instruction manual. Condition is NRA Excellent. ***Modern Firearm***

7-1/2" In Diameter. From the Phil Spangenberger Collection

and Roman Coin. First one is an Apollo 11 colorized $2.00 bill Serial # C07939086A. A 2020 colorized bill of Donald Trump Serial # C07976172A. A Civil War 150 Anniversary Colorized bill Serial # C07940341A, a July 4th colorized bill serial #L76048318A, a Man in Space colorized bill serial #C07936923A, an Independence Day colorized bill serial #B33538800A, a One dollar colorized bill with George Washington, and a Roman coin Constantine the Great includes Certificate of Authenticity from the preferred Collectors Guild

1) WW2 Japanese Type 90 combat helmet used by the Thai Army/Police forces. There was an over supply of Japanese helmets after the war in Asia, Thailand adopted the Japanese helmet as there own (M30-32). The IJA star has been removed, replaced with the brass Thai crest and Thai leather liner installed. Still has most of it's OD green paint. 2) WW2 Italian M33 combat helmet, OD paint, correct leather liner and web chinstrap. These helmets were used from the 1930's to the 1990's by the Italian army and this helmet appears to have been arsenal refurbished at some point, excellent condition. inside of the back rim stamped "AL 32", Azienda Lavorazione, denoting Pirelli’s production facilities, 32 is the year of that specific production batch.

American made semi-automatic striker-fired pistol chambered for 9x19mm Luger, and manufactured in Yonkers, NY. The Kimber Evo line of pistols was designed to be a lightweight concealed carry offering with style (SKU 3900017-Kimber). Pistol features an aluminum frame with a matte black KimPro II frame finish, bull-nosed steel slide with front and rear slide serrations, matte black FNC (Ferritic Nitrocarburizing) slide finish, flared ejection port, a 3.16" barrel with a target crown, full-length metal guide rod assembly with dual recoil springs, loaded chamber view port, striker indicator, fixed blade front sight with a white dot, serrated dovetailed 'U' notched rear sight with two white dots, smooth curved trigger with an integral blade safety, no firing pin block safety, reversible checkered push-button magazine release, accepts 7-round magazines, serrated slide stop, undercut trigger guard, smooth front strap, brown checkered nylon back strap, beveled magazine well, and two-piece brown checkered nylon grips. The original matte black finishes retained is approximately 99% with little to speak of. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. The grip polymer is in excellent condition with nothing remarkable. Pistol includes the original factory cardboard box with end label, gray soft case, one magazine total, cable lock, gun oil, instruction manual, paperwork, and a sticker. Condition is NRA Excellent - Like New. ***Modern Firearm***

Boyd's "Applejack' laminated Pro-Varmint Savage 116 long-action DMB stock, tapered barrel, three sling studs, 1/2' solid rubber recoil pad. Like new condition.

Vintage Himalaya-Pickel "Kuno Rainer" Ice Axe is a highly sought-after, vintage mountaineering ice axe from the 1930s. Originally manufactured in Fulpmes, Austria, by the blacksmith Felix Ralling, the axe was developed with Austrian mountain guide Kuno Rainer, who took part in early expeditions to Nanga Parbat in the Himalayas. Known for their specific craftsmanship and design elements, built with a serrated steel pick and adz, ash wood shaft, and a four-sided metal spike at the base. The head is stamped with "Himalaya-Pickel Modell Kuno-Rainer" on one side, and "F. Ralling, Hammerwerk, Fulpmes" "Made in Austria" on the opposing side. The Kuno Rainer model is largely treated as a functional antique. They are highly prized by collectors and for decorative lodge or cabin displays. Metal loop hanger attached. Very good condition with no damage. measures 32 1/2"-L, the head is 12"-W.

Late 19th to 20th century rifle molds. A) Liddle & Keading, S.F. marked, all brass. Large grease grooves (4) bullet with excellent cavity .40+ CAL. B) Ladd & Smith large rifle CAL bullet mold. Good cavity. C) .32 S&W Winchester with C.M. King Oakland dealer stamp. Altered to large ball cavity. Fair to good exterior. Cavity fine. D) Crude unmarked .38 - .42 CAL mold. Good cavity. Exterior rough. Fair cavity. E) Very large rifle case mold about .42 - .46. Very rough with poor cavity.

American made pump-action shotgun chambered for 3" 12 Gauge Magnum shotshells, and was manufactured circa 2013 ('RH' date code) in Ilion, NY. The Remington 870 was introduced in 1950. Shotgun features a matte black 'Fieldmaster' finish (matte blue), billet steel receiver, a 28" vent ribbed barrel, accepts Remington Chokes with a 'Modified' choke installed (measured with a drop-in Gauge), green fiber optic front sight, smooth curved trigger with beveled edges, annular cut cross-bolt safety in the trigger guard, polymer trigger guard with a serrated bolt release at the front, twin action bars, and a knurled magazine tube cap. The black polymer furniture consists of a semi-pistol gripped shoulder stock with granular texturing at the wrist, granular textured and finger grooved forend, Remington 'R' marked on the grip cap, sling stud on the bottom of the shoulder stock, a 14" length-of-pull, and a solid black rubber SuperCell Recoil Pad. The original matte black Fieldmaster finish retained is approximately 98% with light handling blemishes, a few nicks and scratches, and a light dusting of white spray paint on the left side of the firearm. Metal displays no deformation, but there are a couple of spots of oxidation on the right side of the receiver and on the barrel's ventilation rib. Action is smooth and crisp, and the bore is smooth and shiny. The furniture polymer is in very good condition with the same light spray paint coverage as previously mentioned. Condition is NRA Good. ***Modern Firearm***

Braided Yellow Gold Choker. 13.91 grams

Brilliant cut. Yellowish-brown in color

Sterling inlaid pendant with turquoise spiny oyster abalone. Maker marked RR. On a 20 strand shimmering waters chain.

(1) Shinwa sword with colored damascus blade, dragon tsuba with white lacquered scabbard, white wrapped handle, like new in the box (2) Musha Shinobi sword with black steel blade, black wrapped handle, black lacquered scabbard, like new in the box (3) Shinwa sword with damascus steel blade, black lacquered scabbard, black wrapped handle, with winged tsuba, like new in the box (4) Shinwa sword with colored damascus steel blade, red lacquered scabbard, like new in the satin lined display box

All are 20th century type. 1) Hide wrapped and beaded tomahawk with feather and horse hair fringe, measures 17" with 7" blade 2) Wood handled and spotted pipe tomahawk with ornate heart blade, measures 18" tall with 7" blade 3) Wood handled with spotted designed pipe tomahawk, with beaded and horse hair fringe, measures 17.5" tall with 6.5" blade 4) Wood handled pipe tomahawk with beaded and spotted designs, measures 20.5" tall with 7" blade From the Phil Spangelberger Collection

Forged metal spurs with raised geometric motif in fair to good condition, small amount of rust From the Phil Spangelberger Collection

Entitle "The Eagles Nest" signed John D. Shaw from the band of Brothers, signed by artist and some military members. Limited Edition #632 of 850. 32"W x 221/2"H. Includes reproduced photographs preserved in tube and unframed.

34" from base to nose, 59" H, 39.5" horns

Ornate M33 French fireman's helmet featuring the phrase "Fluctuat NEC Mergitur" indicates it belonged to the Paris Fire Brigade. Circa 1930's through WW2. The phrase is the official motto of Paris, translating from Latin to "Tossed by the waves but does not sink". The Latin phrase is stamped directly onto the ornate front badge featuring a floral wreath, a sailing ship under a castle, the front of the raised comb has a brass "Flaming Bomb" insignia. Chrome Adrian-style construction with brass trim, full leather lining and chinstrap. Overall excellent condition with some flaking around the edges of the leather lining.

American made semi-automatic shotgun chambered for 2-3/4" 20 gauge shells, and manufactured in St. Louis, MO. Remington produced this vintage shotgun from 1940 until 1947 using the design created by John Moses Browning. It is a standard weight shotgun featuring a blued finish, an approximately 22" vent ribbed cut-down barrel, Lyman 'Cutts' compensator, steel bead front sight, serrated magazine cut off, steel trigger guard, annular cut bolt release, smooth slightly curved trigger, and an annular cut manual safety in the rear of the trigger guard. The hardwood furniture consists of a round knob semi-pistol gripped shoulder stock with checkering at the wrist, a finger grooved checkered forend, 14" length-of-pull, and a black plastic Browning butt plate. Receiver displays limited coverage of scroll designs with the Browning trademark on the left side of the receiver, and the top of the receiver has an abrasive blasted texture to it. The original blued finish retained is approximately 98% with light edge wear, and minor handling blemishes around the loading port. Metal shows small spots of rust on the receiver, barrel, and on the bolt and elevator. There was no observed deformation. Bore is bright, but needs to be cleaned. The action is smooth and crisp. Furniture wood is in good to very good condition with some handling marks. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

'2nd Series Target Model,' an American made semi-automatic rimfire pistol chambered for .22 Long Rifle, manufactured between 1950 and 1955 in Hartford, CT. Pistol features a blued finish, a 6" tapered barrel, serrated ramp and pinned blade front sight, micrometer adjustable 'Colt Master' square notched rear sight, serrated curved trigger, frame mounted serrated push-button magazine release, serrated frame mounted manual safety, serrated frame mounted slide stop/hold open, smooth grip straps, lanyard loop at the heel of the grip, and two-piece checkered injection molded target grips with the rampant colt logo on the right grip panel. The original blued finish retained is approximately 88% with light handling blemishes, some general thinning, and edge wear. The blued finish is showing patina with the finish turning a mottled grey color. Metal displays rust along the bottom of the barrel towards the muzzle, but no deformation. The bore is bright with strong rifling, and the grips are very good with a few very small chips around the bottom edge of the panels. The action is smooth and crisp. Pistol includes a black nylon holster, and one magazine total. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

Total weight 33 grams. Excluding watch which is 19 grams with the movement. Dior Bulova watch 14 yellow gold marked. Bulova #130656. Also included is 14k yellow gold band size 8. A Chinese character pendant ,money symbol pendant, shamrock pendant, a heart motif locket, a broken gold chain and other broken pieces of jewelry

1) Sterling horse head pendant 2) Horse and rider pendant 3) Ribbon heart and chain 4) Sterling heart ribbon ring

A) Mechanics Pavillion Union Square 1865. 6" x 7-3/4". Framed and titled. Fair to good condition. B)Tintype of hunters 4-14" x 3-1/4". Percussion rifle and shotgun. Dark. Fair only. C) Hunters with guns on photographer's card. Good condition. 5-1/2" x 4". About 1870's. D) Camp Richards titled photo, dated July 29, 94. Marin County. 4-1/2" x 7-1/2". Good condition. 1 man holding a Winchester 73 or 76. E) Hunter with 210 ducks and geese. In negative. Marked, "What's the matter with Wrangell?" 4-1/2" x 6-1/4". Good condition. F) Stereopticon card 1904, shooting prairie chickens. Good condition. G) Photo of hunters. 1 with percussion rifle, 1 with break open shotgun. About 1900. 4-1/4" x 3". Fair to good condition.

(1) Shinwa sword with colored damascus blade, dragon tsuba, black lacquered scabbard, black wrapped handle, like new in the box (2) Shinwa sword damascus blade that has dried oil on it, needs to be cleaned, black lacquered scabbard, black wrapped handle, in a satin lined display case (3) Sword with stainless steel blade, circle of fans on the tsuba, black lacquered scabbard, black wrapped handle, in the box (4) Japanese sword with stainless steel blade, black lacquered scabbard, black wrapped handle, like new in the satin lined box

Measures: 29"H x 12"W x 20"D. Excellent condition. ***Shipping Must Be Arranged By Buyer***

GSG-5' Semi-automatic modern sporting rifle modeled after the iconic HK MP5SD, manufactured in Germany circa 2009. Features a titanium grey finish, 16.25" barrel with removable faux suppressor, hooded post front sight, 4-position rear drum sight, smooth trigger, ambidextrous safety, paddle & push button magazine releases, factory 22 round magazine, textured black polymer forend, black polymer trigger housing with smooth pistol grip, and fixed shoulder stock. Rifle retains approximately 99% of its original finish showing some scuffs with no major wear observed. Action is smooth, the bore is excellent, and the polymer is fine. NRA Condition-Excellent. Modern Firearm.

Entitled "Spearhead" by Gareth Hector of Tank signed by artist and autographs of veterans. Measures 36"W x 22-1/2"H. Includes reproduced photographs unframed.

20" ears to base, 7" W.

in Sterling Silver.

Includes a copper engrave cuff sterling Hopi watchband and two nickeled concho belts. Belts measure 27" end to end with two extra conchos included.

Mount is in great condition. Measures 41" x 18" x 30". ***BUYER MUST ARRANGE SHIPPING***

Austrian made safe-action semi-automatic striker fired compact pistol chambered for .40 Smith & Wesson. This pistol is highly customized, and one of the only Gloc branded parts remaining is the frame. Pistol features a satin stainless steel finished Alpha Wolf slide, front and rear slide serrations, an approximately 4-5/8" threaded Lone Wolf stainless barrel, knurled thread protector, full-length metal guide rod with a flat recoil spring, tritium fixed blade front sight with a white outline, dovetailed tritium square notched rear sight with white outlines, smooth gray flat-faced trigger with an integral blade safety (Glock Store), extended serrated push-button magazine release, aluminum Agency magazine well, aluminum silver and black serrated slide plate, extended serrated slide stop, black granular textured polymer frame and checkered grip straps, accessory rail on the dust cover, and an undercut trigger guard. A Glock Store 'Complete Flat Face Pyramid Trigger V2' kit was installed into this pistol. The original stainless steel slide finish retained is approximately 96% with minor scratches, light edge wear, and some carry wear. Metal displays some deformation on the left edge of the slide, and on the inside of the slide. Oxidative speckling is present on the external surfaces of the slide. Action is smooth and crisp, and the bore is bright with strong rifling. The frame polymer is in very good condition with some light damage to the accessory rail. The tritium lamps still glow brightly. Pistol includes one 13-round magazine total. Condition is NRA Good. ***Modern Firearm***

A Gucci stainless steel watch swiss made movement, simple chronograph type needs battery. A raymond Weil Genuiveve two toned stainless steel watch

By Frederic Remington. Double-matted and framed alike 17" x 12". Signed in the print.

American made lot of three stripped Palmetto State Armory AR-15 receivers, and manufactured in West Columbia, SC. Receivers feature a 7075-T6 aluminum construction, a matte black hard-coat Mil-8625 Type 3 class 2 anodized finish, fencing, beveled magazine well, and an open trigger guard. 1) #W022100; The left side of the magazine well is marked with 'PROPERTY OF U.S. GOVERNMENT, M4A1 CARBINE, CAL. 5.56 MM', and 'SAFE', 'SEMI', and 'AUTO' are marked around the selector lever on both sides of the receiver. The original matte black anodized finish retained is approximately 99% with nothing remarkable. The metal displays no rust, of deformation. Condition is NRA Excellent - Like New. 2) #W1016136; The left side of the magazine well is marked with 'PROPERTY OF U.S. GOVERNMENT, M4A1 CARBINE, CAL. 5.56 MM', and 'SAFE', 'SEMI', and 'AUTO' are marked around the selector lever on both sides of the receiver. The original matte black anodized finish retained is approximately 99% with only superficial handling marks. The metal displays no rust, of deformation. Condition is NRA Excellent - Like New. 3) #SCD670875; The left side of the magazine well is marked with 'PA-15', and 'MULTI' under the engraving of the Palmetto State Armory trademark. The metal displays no rust, or deformation. The original matte black anodized finish retained is approximately 99% with nothing remarkable. Condition is NRA Excellent - Like New. ***Modern Firearms***

Lot consisting of very fancy pocket knife style folding letter opener with tortoise shell blade, signed "A. Risler & Carre" with small hallmarks. Gutta Percha match case. Marked "Compliments of Star Brewery Co, Belleville, ILL". Draftsman tool in case, marked "Estate Mayor - Especial and Negretti and Zambra dealer label in the lid and a cased, unmarked draftsman tool set along with brass violin match safe.

American made single-action rimfire revolver chambered for .22 Long Rifle, and was manufactured in Bainbridge, GA. Revolver features a 6.5" black oxide round barrel with a 1:14 right-hand twist rate, fixed blade front sight, square notched top strap rear sight, smooth curved trigger, fluted black oxide 6-round cylinder, knurled cylinder pin head, bird's head style ejector rod button, simulated color-case finished zinc alloy frame, matte black zinc alloy trigger guard, external hammer with a checkered spur, manual safety on the left side of the hammer, and two-piece smooth laminate camo green grips. The original black finish retained is approximately 99% with light handling blemishes. Metal displays no deformation, but the barrel, cylinder, and loading gate have light spots of oxidation. The bore is bright with strong rifling, but the cylinder chambers show a machining defect that may be from tool chatter (it visually looks like smooth ribs). The action is smooth and crisp, with a tight lock-up. The grip wood is in excellent condition with little to speak of. Condition is NRA Good. ***Modern Firearm***

(1) Shinwa sword with damascus blade, black lacquered scabbard, black wrapped handle, like new in the box (2) Two Shinwa swords with colored damascus blades, black lacquered scabbards, black wrapped handles, like new in the box

'Gen 2,' an American made semi-automatic folding carbine chambered for 9x19mm Luger, and manufactured in Cocoa, FL. Rifle features a matte black finish, 16" threaded barrel with a knurled thread protector, protected elevation adjustable front sight post, rear peep sight, smooth curved trigger, accepts Glock magazines, push-button magazine release, manual bolt hold open utilizing the cocking handle, annular cut manual safety on the receiver, angled foregrip, ribbed and square textured forend with M-Lok slots on the sides and picatinny rails on the top and bottom, and an adjustable length-of-pull butt stock with a sling slot. With the trigger guard acting as a latch, the carbine folds in half for storage or travel. The original matte black finish retained is approximately 99% with nothing remarkable. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. The black polymer furniture is in excellent condition with only superficial handling marks. Rifle includes two magazines total. Condition is NRA Excellent. ***Modern Firearm***

Bell & Carlson M5 Detachable Magazine System stock for Remington 700 short action. Extended magazine well, paddle release, varmint barrel channel, three sling studs, aluminum bedding, flat forearm, dark camo polymer stock. Very good condition.

First one is an Indian head pennies. 10 total. from 1903-1905 framed. and a framed buffalo nickels 1930's era framed.

Framed music from Pat Sullivan's famous creation in song. Words by Alfred Bryan. 13-1/2" x 10-1/2"

Mount is in excellent condition. Measures 40" x 33" x 31". ***BUYER MUST ARRANGE SHIPPING***

For parts, or repair. Czechoslovakian military bolt-action service rifle chambered for 8mm Mauser, and manufactured by Brno Ceskoslovenská Zbrojovka circa 1924 - 1930. Imported by Century Arms International out of Georgia, VT. Rifle features a blued finish, an approximately 29" barrel, dovetailed inverted ‘V’ front sight, tangent rear sight graduated to 1900 meters, smooth curved trigger, milled trigger guard, bolt not included, 'H' style barrel band, left receiver rail mounted bolt release, bayonet lug, 5-round internal magazine with military style floorplate, and stripper clip guides cut into the receiver. The hardwood furniture consists of a smooth semi-pistol grip shoulder stock, smooth full-length forend, smooth handguard, bolt disassembly disc in shoulder stock, sling swivel on rear barrel band and the bottom of the shoulder stock, sling swivel behind the wrist, and a smooth metal butt plate. Markings on the receiver ring include the serial number, and the words, "CS. ST. ZBROJOVKA BRNO". The original blued finish retained is approximately 92% with edge wear, handling blemishes, and the finish taking on a brown patina. Metal displays some areas of oxidation on the stock line, with a few small spots elsewhere. Metal deformation was observed as small dings, and rough screw slots. The action function cannot be determined because there is no bolt, and the bore is bright with strong rifling. Furniture wood is in fair to good condition with many normal handling marks. Condition is NRA Fair to Good - With Missing Parts ***Modern - C&R Eligible***

.300 Blackout upper receiver, 16" barrel with 1:8 twist, and 15" free floating

American made side-by-side hammerless box-lock shotgun chambered for 2-3/4" 12 gauge shotshells, and manufactured circa 1924 in Ithaca, NY. The Nitro Special was in production from 1921 until 1948. Shotgun features refinished blued barrels with a color-case hardened receiver, approximately 30" serrated low ribbed barrels, fixed chokes measure 'Full' in the left bore and 'Improved Cylinder' in the right (measured with a drop-in gauge), brass bead front sight, smooth curved double triggers, shell extractor, annular cut top lever, serrated tang mounted manual safety, and a shell extractor. The refinished hardwood furniture consists of a round knobbed pistol gripped shoulder stock with checkering at the wrist, checkered splinter forend, 15" length-of-pull to the front trigger, 2" drop at comb, 3" drop at heel, and a brown solid rubber Decelerator recoil pad with a black spacer. Receiver depicts a waterfowl scene with a flying goose on both sides. Serial number '173654' match on the receiver, barrels, and water table. The blued finish retained is approximately 98% with nothing remarkable. The color-case finish retained is approximately 10% with carry wear, and most of the brilliant colors have faded. Metal displays no deformation, but pitting, and light oxidation spots were observed. Bore is bright and shiny, and the action falls slowly under its own weight, and the top lever rests on the tangs centerline. Furniture wood is in very good condition as refinished with some low checkering, and minor handling marks. Markings are sharp and legible. Condition is NRA Good - As Refinished ***Modern Firearm - C&R Eligible***

Czech made striker-fired semi-automatic compact pistol chambered for 9x19mm Luger, and manufactured circa 2018. The P-10c is a compact variant of CZ's P-10 line of pistols. Pistol features a black nitride slide, front and rear slide serrations, a 4" cold-hammer-forged barrel, tritium fixed blade front sight with a white outline, dovetailed tritium square notched rear sight, full-length metal guide rod with a flat recoil spring, firing pin block safety, serrated curved trigger with integral blade safety, serrated ambidextrous slide stop, checkered ambidextrous push-button magazine release, accessory rail on dust cover, Flat Dark Earth (FDE) fiberglass reinforced polymer frame with square texturing on all sides, and interchangeable backstraps. The original black nitride finish retained is approximately 99% with nothing remarkable. Metal displays no rust, or deformation. The FDE polymer frame is in excellent condition with little to speak of. The action is smooth and crisp, and the bore is bright with strong rifling. Pistol includes one 15-round magazine total. Condition is NRA Excellent. ***Modern Firearm***

1) Plains indian type tomahawk with wood handle and fancy beaded drop, measures 20" tall with 5.5" blade 2) Wood handle, beaded and spotted pipe tomahawk, measuring 18" overall with 7" blade 3) Wood handle tomahawk with spotted handle decorated with raw hide and feather fringe, measuring 17.5" tall with 6.5" blade From the Phil Spangelberger Collection

1/ 69"31" And 2/ 47"x37"

Includes: F-14 Tomcat print, 12 of 500, 26"W x 14"H. F/A-18 Hornet print, 229 of 750, 22"W x 14"H. AV-8B Harrier II, 140 of 1000, 21"W x 14"H. F-111 Aardvark, 1127 of 2000, 35"W x 14"H.

brown laminate custom thumbhole benchrest stock of a Remington 700 short-action. Right hand cheek rest , rail of hand stops, etc. inletted in the underside of the forearm, Morgan adjustable recoil pad. Single-shot, 1 1/2" barrel channel. Overall very good/sound with minor scratches/dings.

A) History of N.W. Coast - by Bancroft 1884. Covers intact. Fair. Needs conservation. B) The Shotgun and Sporting Rifle by Stonehence. 1863 era. Cover detached needs conservation and restoration. Fair to poor. C) Shooting and Fishing (successor to the rifle) 1888 magazines. Bound. Great adverts and illustrations, covers came loose bu present, fair to good. D) History of The Donner Party 1922. Fair with stains and tears. E) The Shotgun by TDS Purdey and J.A. Purdey. F) Gun Collecting - Chappel 1939. Good condition.

Boyds Gunstock - Rem 700 LA (1pc Floorplate) Classic Nutmeg, flat/oval forearm, three sling studs, 1/2' solid rubber recoil pad, high comb. Like new condition.

Mount is in excellent condition. Measures 34" x 27" x 32". ***BUYER MUST ARRANGE SHIPPING***

American made single-shot bolt action rimfire rifle chambered for .22 Short, Long, or Long Rifle, and manufactured in New Haven, CT. The Model 67 was produced circa 1934-1948. Rifle features a blued finish, receiver and barrel drilled and tapped for optic mounting, an approximately 27" round barrel integral to the receiver, dovetailed blade front sight with a brass bead, elevation adjustable sporting rear sight, smooth curved trigger, turned down bolt handle, knurled cocking knob (manual cocking), metal trigger guard, and a flag type manual safety on bolt's rear. The walnut furniture consists of a smooth semi-pistol gripped shoulder stock, smooth forend, and a black checkered factory composite butt plate. The original blued finish retained is approximately 90% with general thinning along the barrel, light edge wear, and minor handling blemishes. No metal deformation was observed, but the rifle shows light oxidation around the rear sight and the optic mounting holes. Action is smooth and crisp, and the bore is bright with strong rifling. Furniture wood is in good to very good condition considering its age, showing minor storage and handling marks. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

Palmetto State Armory .308 upper receiver with 18" barrel with 1:10 twist, bolt carrier, and 15" handguard.

American made semi-automatic gas-operated shotgun chambered for 2-3/4" 12 Gauge shotshells, and manufactured circa 1978 ('GQ' date code) in Ilion, NY. The Model 1100 was introduced on 1963, and is still made today. Shotgun features a blued finish, an approximately 25-1/2" ventilated rib barrel, "Improved Cylinder' fixed choke, steel bead front sight, white mid-bead, half-length 4-round tube magazine, smooth curved trigger with beveled edges, aluminum trigger guard, serrated charging handle, bolt release on shell lifter, annular cut trigger guard mounted push-button safety, and a bottom loading and side ejecting action. The gloss walnut furniture consists of a semi-pistol gripped shoulder stock with pressed checkering at the wrist, finger grooved and pressed checkered forend, smooth black plastic grip cap with a white diamond and white spacer, 14-1/2" length-of-pull, and a serrated solid black rubber recoil pad with white and black spacers. Partial coverage of floral scroll designs are engraved on the receiver and bolt. The original blued finish retained is approximately 99% with only superficial blemishes. Metal displays no rust, or deformation. Bore is bright and shiny, and the action is smooth and crisp. Furniture wood is in excellent condition with little to speak of. Condition is NRA Excellent. ***Modern Firearm***

#1023086 German made traditional double-action revolver chambered for .375 Smith & Wesson Magnum, and imported by Excam Inc. out of Hialeah, Fl. Revolver features a blued finish, a 4" ventilation ribbed barrel, serrated fixed blade front sight, micrometer adjustable square notched rear sight, serrated curved trigger, external hammer with a serrated spur, transfer bar safety, fluted six-round cylinder, un-shrouded knurled ejector rod that doubles as a cylinder release, and a single-piece brown checkered composite grip with granular texturing on the back and a thumb rest on the left side. The original blued finish retained is approximately 97% with light handling blemishes, and the finish is starting to take on a plum color. Metal displays no deformation, but the revolver shows sparse oxidative speckling on some of the components. The action is smooth with a tight lock-up, but the cylinder can be turned in one direction manually by hand. The bore is bright with strong rifling, and the cylinder chambers are also bright. The synthetic grip is in excellent condition with superficial handling marks. Condition is NRA Good. ***Modern Firearm***

Wood construction with cotton fabric decorated with pink and purple ribbon, measures 30" tall by 12.5" wide From the Phil Spangelberger Collection

American made magazine feed bolt-action rimfire take-down rifle chambered for .22 Winchester Magnum Rimfire, and manufactured in North Haven, CT. The Model 25MB was in production circa 1987 and 1988. Rifle features a blued finish, optic mounting dovetail machined into receiver, an approximately 16-1/4" Micro-Grooved round barrel, serrated ramped blade front sight, elevation adjustable rear sporting sight, serrated curved trigger, aluminum trigger guard, turned down bolt handle with a knurled bolt knob, right receiver mounted manual safety, serrated magazine release lever mounted inside the magazine well, and accepts 7-round detachable box magazines. The hardwood furniture consists of a smooth semi-pistol gripped shoulder stock, smooth forend with a knurled take-down screw, and a checkered black plastic butt plate. The original blued finish retained is approximately 97% with very light handling blemishes, and some edge wear. Metal displays a couple of small nicks on the barrel, and a small amount of oxidation was observed on the muzzle. Action is smooth and crisp, and the bore is bright with strong rifling. Furniture wood is in very good to excellent condition with a few minor handling blemishes. Rifle includes one magazine total. Condition is NRA Good. ***Modern Firearm***

Includes: AH-64 Apache by Stokes, 8 of 950, 31"W x 24"H. A-10 Warthog by Farnsworth, 102 of 950, 14"W x 11"H

Natural Brown Laminate Stock Right Hand Savage 12 short-action blind magazine stock. Sling studs, bipod rail installed, thin rubber recoil pad, black fore end cap. Overall very good/sound with many small scratches, needs touch-up.

Cut down wool textile in red white and gray. Measures 18-1/2" x 17" Condition is fair. Shows bleeding into the white and heavy edge wear

A) Two volume set Lugs Firearms Past and Present. B) Great Century of Guns - Bagdanovic. C) One Hundered Great Guns - Lindsey. D) World of Guns - Akehurst. E) Pistols of The World - Claude Blair. F) The Age of Firearms - Hold. G) Color Treasury of Firearms. H) European & American Arms - Claude Blair. All good used condition, minor wear, tatters, and show research use.

1-6x24 with 30mm aluminum 1.535" ALPHA-MSR cantilevered mount.

SN: U25160903621. Swiss Arms TG-1 Break Barrel Nitro Piston .177 air rifle with 4x40 scope with Mil-Dot reticle and adjustable dark earth stock. Red/green fiber optic sights, manual safety in triggerguard. Excellent condition, in good working order.

One piece, checkered fiberglass stock for the Weatherby MK V. B&C vented rubber recoil pad, , tapered barrel channel. Stock is very good, painted brown with black sides.

American made magazine fed bolt-action rimfire rifle chambered for .22 Winchester Magnum Rimfire, and manufactured in North Haven, CT. Model 783 was in production from 1971 until 1988. Rifle features a blued finish, dovetailed receiver for optic mounting, an approximately 22" Micro-Grooved round barrel ('JM' marked), raised dovetailed blade front sight, elevation adjustable sporting rear sight, serrated curved gold-toned trigger, serrated right receiver mounted manual safety, 13-round full-length tube magazine, red cocking indicator on cocking piece, and an aluminum trigger guard. The refinished hardwood furniture consists of a semi-pistol gripped shoulder stock with scroll checkering at the wrist, scroll checkered forend with a sling swivel, sling swivel on the bottom of the shoulder stock, and a black checkered factory butt plate with a white spacer. The original blued finish retained is approximately 88% with edge wear, contact wear on the receiver dovetail, and losses on the barrel and magazine tube. A good amount of finish is missing from the trigger guard. Metal displays a dent on the magazine tube, and scattered areas of rust. Bore is bright with strong rifling, and the action is smooth and crisp. Furniture wood is in good condition (as refinished) with an uneven finish application, low checkering, and minor blemishes. Condition is NRA Near Good. ***Modern Firearm***

Black Leather Single Revolver Holster Maker Marked.

Pair of U.S. WW2 issued shoe shoe's. C.A. Lund 1945 "Bear Paw" Wood Snow Shoes. Wood stamped "U.S. C.A. Lund & Co. Hastings Minn" and "8583 1945". Bindings marked "U.S. W.L.P. Co. Inc. Bkly, NY". Overall good, mostly intact with only one of the boot straps remaining. Great display for ski lodge or cabin.

A. "Guns of the World" by Hans Tanner, Editor B. "Small Arms Lexicon and Concise Encyclopedia" (Shooter's Bible) C. "Weaponry: An Illustrated History" by Chuck Willis and Berman Museum D. "Antique Guns and Gun Collecting" by Frederick Wilkinson E. "Weapons: A Pictorial History" by Edwin Tunis F. "The Complete Encyclopedia of the World's Firearms: by Ian V. Hogg G. "The Illustrated Book of Guns" by David Miller H. "The Collecting of Guns" by James Serven I. "Treasury of Guns" by Harold Peterson

Includes a moonstone, abalone and turquoise pendant all sterling silver.

Taxco marked sterling and onyx necklace with matching bracelet with wave motif.

American made compact semi-automatic striker-fired pistol chambered in 9x19mm, manufactured in Dallas, TX. The Rost Martin RM1C was introduced in 2024. Pistol features a matte black Tenifer finish, optic cut slide with a removable plate installed, a 4" hammer forged match grade barrel with a target crown, dovetailed serrated fixed blade front sight with white dot, dovetailed serrated 'U' notched rear sight, smooth flat faced trigger with integral blade safety, front and rear slide serrations, loaded chamber view port, striker indicator, anti-glare serrations on the top of the slide, full-length metal guide rod with flat recoil spring, serrated ambidextrous push-button magazine release, serrated ambidextrous slide stop, accepts factory 15-round magazine, integral picatinny accessory rail on dust cover, flared magazine well, undercut trigger guard, interchangeable backstraps, and durable matte black polymer frame with granular texturing and Rost Martin insignias on both sides. The original Tenifer retained is approximately 99% with nothing remarkable. Metal displays no rust, or deformation. Bore is bright with strong rifling, and the polymer frame is in excellent condition with little to speak of. The action is smooth and crisp. Pistol includes the original factory cardboard box with end label, two magazines total, two extra backstraps, cable lock, optic plate with hardware, and an owner's manual. Condition is NRA Excellent - Like New. ***Modern Firearm***

16" barrel marked "WMD 5.56x45 NATO 4150 CrMoV" (Chrome Moly Vanadium): Highly durable, Mil-Spec barrel steel, ported muzzle break, 15" free float handguard, Magpul M-LOK MVG MOE Vertical Grip, full length rail, 3 MI rail covers, with hand stop on the 6 o'clock cover, Magpul MBUS PRO Steel Sights installed on rail, flat-top receiver with integral rail, shell deflector, forward assist, dust cover removed, AXTS Raptor ambidextrous charging handle, complete bolt carrier group. receiver, handguard & foregrip are finished in U.S. Woodland camo. Overall very good condition, bore is excellent/bright.

Semiautomatic carbine chambered for 9x19mm Luger. Features blued finish, black polymer furniture, 16" barrel, adjustable protected post front sight, adjustable rear peep sight, left side charging handle, manual safety, spring loaded recoil absorbing buttplate, magazine well in grip. Accessory rail sections are located on bottom of barrel, bottom of handguard, and on top of receiver, sling swivels. Older Guntec red dot sight installed under the barrel, in good working order. Bore is very good/bright. Overall condition very good with scattered minor scratches. Includes black nylon sling, two factory 10-rd magazines, one 15-rd magazine with extension, one unmarked 10-rd magazine, and two 8-rd magazines (6) total. NRA Condition-Near Very Good. Modern Firearm.

American made semi-automatic blow-back centerfire rifle chambered in .45 Automatic Colt Pistol, and manufactured in Mansfield, OH. Rifle features a black finish, factory installed picatinny optics rail on top of the receiver, a 17-1/2" barrel, hooded elevation adjustable inverted 'V' front sight, fully adjustable shrouded rear aperture sight, serrated curved skeletonized trigger, smooth push-button magazine release, checkered receiver mounted manual safety, knurled left side charging handle, and a picatinny rail section on the bottom of the barrel. The black synthetic furniture consists of a granular textured pistol gripped stock, ribbed polymer handguard with a 4-3/4" picatinny accessory rail on the bottom, and a skeletonized shoulder stock with a shock absorbing checkered recoil pad. A BSA red dot optic is mounted to the top of the receiver, and it includes black rubber lens covers. The original black finish retained is approximately 99% with a few light scratches, and minimal edge wear. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. The furniture polymer is in excellent condition with very few and minor handling blemishes. The BSA red dot optic cannot be tested because the batteries were dead. Rifle includes one magazine total. Condition is near NRA Excellent. ***Modern Firearm***

Includes: Crimson Trace CTS-1000, Sig Sauer Romeo-MSR 1x20 Compact Red Dot Sight, HEX Dragonfly optic, and Barska red/green dot optic.

In plastic Bucket O' Bullets 5600 cartridges in four buckets of 1400 rounds each. Sealed in original box.

Choate Winchester 70 Short Action "The Ultimate Sniper" Stock. RH, OD green. Complete, very good condition.

(1) Loose concho, silver with turquoise stone measures 2" long X 1 1/2" wide (1) cigarette lighter case, silver with turquoise and coral stones (1) sand cast silver naja

American made semi-automatic direct impingement modern sporting rifle chambered for 6mm Advanced Rifle Cartridge, and manufactured in St. Cloud, MN. This is a custom built rifle with the receiver marked 'CAL .223-5.56mm', and a 6mm ARC chambering. Rifle features a matte black hard-coat anodized finish on the receivers, an approximately 24" stainless steel heavy barrel with a target crown, no mounted iron sights, DPMS competition 'slick-side' upper receiver with picatinny rail on top, smooth curved two-stage trigger, oversized trigger guard, serrated paddle magazine release, serrated receiver mounted manual safety, charging handle with an extended latch, annular cut push-button magazine release, flared magazine well, overmolded rubberized black pistol grip with low finger grooves, free-float 12-1/2" tube handguard with two sling studs and a 3" picatinny rail section, rifle-length gas system, low-profile gas block, M16 style bolt carrier, staked gas key, rifle length receiver extension, rifle buffer with standard spring, and an Ace fixed skeletonized stock with a black serrated solid rubber recoil pad and a foam cheek pad. A 3.5-10x40mm scope with a adjustable parallax and a Mil-dot reticle is mounted on the receiver utilizing two-piece 30mm rings. The overall matte black finish retained is approximately 92% with mostly light scratches that do not expose bare metal, and a small amount of material transfers. Metal displays no deformation, but some oxidation was observed on the bolt carrier. Action is smooth and crisp, and the bore is bright with strong rifling. The furniture is in good to very good condition with a mixture of handling blemishes, due to the furniture being different components. The scope's sight picture is bright and clear. No magazine included. Condition is NRA Good. ***Modern Firearm***

Fox, Skunk, Badger, Coyotes, Racoon And Others

American made traditional double-action semi-automatic pistol chambered for 9x19mm Luger, and manufactured circa 2004 in Southport, CT. The Ruger P95 was introduced in 1996. The P95 DC is a variation with a decocker only lever on the slide. Pistol features a matte black stainless steel slide, approximately 3.9" stainless steel barrel, pinned blade front sight with a white dot, dovetailed square notched rear sight with two white dots, full-length metal guide rod with dual recoil springs, double and single-action smooth curved trigger, in-the-white ring hammer with a serrated spur, serrated abidextrous pivoting magazine latch, abidextrous serrated decocker lever on the slide, serrated slide stop/take-down lever, black polymer frame with grooves on the panels, Ruger trademarks on both grip panels, and smooth grip straps. The original matte black slide finish retained is approximately 96% with edge wear, handling blemishes, and the slide is taking on a plum color. The polymer frame condition is approximately 92% with carry wear and light scratches. Metal displays no rust, or deformation. Bore is bright with strong rifling, and the action smooth and crisp. Pistol includes one magazine total. Condition is NRA Very Good. ***Modern Firearm***

Two Navajo Sterling hair clips

Black anodized finish, 6.8mm SPC , direct impingement, 20" heavy barrel marked "DPMS 6.8MM 1:11" sight/optics rail on the gas block, round A2 style handguards, flat-top receiver with integral T-marked rail, forward assist, shell deflector, dust cover, charging handle with extended latch, complete bolt carrier group. Excellent condition, bore is excellent/bright.

Includes: Winchester Limited Edition 2006 (2 folding and 1 fixed blade knife), Winchester Limited Edition (2 folding and 1 fixed blade knife), MTech fixed blade 5" blade, 9" overall. Elk Ridge 4.5" fixed blade, 9.5" overall. The Drifter 4.5" fixed blade, 9.5" overall. Puma IP 2.5" fixed blade, 5.5" overall. Smith & Wesson knife set (4.5" fixed blade, 9.5" overall, and 4 blade pocket knife in nylon sheath), Folding knife (4" blade, 5.5" closed/10" open)

Includes a pair of sterling hoops, a pair of floral clip earrings, a pair of two tone hoops "damaged" a pair turtle earrings damaged single crossed earring, a pair of singular cross earring and a singular hoop earring, a singular shamrock, a Mexican sterling bangle and an engraved sterling bubble ring, engraved sterling bangle, sterling beaded choker.

Turkish semiautomatic shotgun chambered for 12 gauge 3" shells, imported by Hatsan USA Rogers, AR. Features matte black finish, black polymer furniture, 18" barrel with fixed cylinder choke & threaded muzzle with installed ported muzzle break, protected fiber-optic sights with adjustable rear, cross-bolt safety, clips for storing two spare shells in side of butt, rubber recoil pad, metal heat shield installed on the top of barrel, tube magazine under barrel, sling studs, magazine cut-off latch, thread protector. Shotgun exhibits minor handling marks. Bore is excellent, as are the stocks. Comes in factory box with matching label, manual, muzzle thread protector and three stock spacers. Condition is NRA Excellent. Modern Firearm.

One by John Shaw entitled Alpine Eagles, artist proof #52 out of 100 from Valor Studios signed in pencil by WWII vets, unframed. Measures 30.5x19. One entitled Out Run the Eagle by Gareth Hector unframed artist proof #70 of 160. Includes Air Force pins. One entitled Unstoppable by Gareth Hector, unframed artist proof #52 of 100. Measures 32" x 20" signed by tankers from the era in pencil, depicts a Sherman tank. Signed by fighter squad in pencil 735/850. 32" x 20". One entitled Fighter Two Guadalcanal by Jim Laurier. Artist proof #735 out of 850. Measures 31-1/2" x 23"

Choate Winchester 70 Long Action "The Ultimate Sniper" Stock. RH, Black. Complete with screws, very good condition.

"Boys Rifle", an American made single-shot rolling breech block rimfire rifle chambered for .22 Long Rifle, and manufactured in Chicopee Falls, MA. The No. 14-1/2 Little Scout was in production circa 1909 - 1936, and Stevens was well known for making this type of rifle. Rifle features a color-case receiver finish, an approximately 18" round blued barrel, fixed blade front sight, dovetailed 'V' notched rear sight, smooth nearly straight trigger, metal trigger guard, shell extractor, external hammer with a serrated spur, takedown screw in front of the trigger guard, and a knurled breech block knob. The refinished hardwood furniture consists of a smooth straight gripped shoulder stock, smooth forend, and a smooth crescent metal butt plate. The original blued finish retained is approximately 88% with slight edge wear, and light handling marks. The color-case receiver finish is almost cleaned, and the metal is pitted. Metal displays a bent breech block handle, screw slot deformation, and pitting with accompanied oxidation along the barrel. Furniture wood is in fair condition with handling marks, and cracking around the tangs. Action is smooth and crisp, and the bore shows rifling with use, and some oxidation. No serial numbers were observed, and the markings are sharp and legible. Condition is NRA Fair. ***Modern Firearm - C&R Eligible***

Vintage American made single-shot rolling-block rifle chambered for .22 Short, Long, or Long Rifle, and manufactured in Ilion, NY. The No. 4 Rolling Blocks were produced circa 1890 - 1933. Rifle features blued barrel and small parts, case-hardened receiver, an approximately 22" octagonal barrel, dovetailed blade front sight, dovetailed 'V' notched rear sight, smooth curved trigger, checkered breech block spur, external hammer with a checkered spur, and a shell extractor. The hardwood furniture consists of smooth straight gripped "perch-belly" shoulder stock, smooth forend, and a smooth crescent metal butt plate. The original blued finish retained is approximately 86% with edge wear, and handling blemishes. The color-case finish retained is approximately 40% with a fading of the colors to a mottled dark gray/brown patina. Metal displays dings and nicks along the barrel, and oxidative speckling was observed on the rifle's entirety. Furniture wood is in very good condition considering its age with some handling marks. Action is smooth and crisp, and the bore shows rifling with use and oxidation. Markings are sharp and legible. Condition is NRA Fair. ***Modern Firearm - C&R Eligible***

Austrian made 'V' model Glock, a striker-fired safe-action semi-automatic full-sized pistol chambered in 9x19mm Luger. The 'V' models are the newest offerings produced by Glock. Pistol features a nDLC (Diamond Like Coating) satin black finished slide, 4.49" barrel with 'Marksman' rifling, polymer fixed front sight with white dot, dovetailed white outlined square notched rear sight, smooth curved trigger with an integrated blade safety, full-length guide rod assembly with dual captive recoil springs, bull-nosed slide with front and rear slide serrations, textured front trigger guard, ambidextrous serrated slide stop, accessory rail on dust cover, serrated and reversible push-button magazine release, serrated slide cover plate, flared magazine well, modular backstrap and beavertail system (MBS), and durable black polymer frame with a small square textured non-finger grooved grip. Pistol retains approximately 99% of its original nDLC finish with nothing remarkable. Metal displays no rust, or deformation. The action is smooth and crisp, and the bore is bright with strong 'Marksman' rifling. The frame polymer is also in excellent condition with little to speak of. This pistol is 'like-new' in box, and still has the factory copper-colored Loctite C5-A anti-seize lubricant in the slide (used for break-in). Pistol includes the original factory foam lined hard case with documents, lock, cleaning tools, three OEM magazines total, two extra backstraps with tool, and a magazine speed loader. Condition is NRA Excellent - Like New. ***Modern Firearm***

Includes: Crimson Trace CTS-1000, Sig Sauer Romeo-MSR 1x20 Compact Red Dot Sight, Liberator 1x22 Mini Dot Sight, McStar micro red dot optic

H-S Precision. Pro-Series M24 tactical stock, aftermarket version of the U.S. Military M24 Sniper Weapon System. Black/gray web polymer, sling studs, aluminum bedding, bipod rail installed, adjustable comb, 1/2" solid rubber recoil pad, heavy barrel channel. Excellent condition.

Pair of dangle garnet earrings set in sterling, two pairs of turquoise dangle earrings, and a pair of abalone earrings set in sterling.

First one is a 20-strand black seed bead necklace. Second is a black glass beaded necklace with round hanging pendant. Third is an 8 strand turquoise colored beaded necklace.

Case of 12 J.P. Clabrough-Birmingham Gunmaker by Lawrence P. Shelton, 11 perfect in wrapping, 1 a sample and slightly handled. Value $480.

Floating half hoop design featuring five round brilliant cut diamonds. Missing earring stick on one earring. 14k white gold setting.

Mount is in great condition. Measures 32" x 12" x 21". ***BUYER MUST ARRANGE SHIPPING***

Small game table with design on table top of two men enjoying a drink and a smoke. Table top can be removed, revealing a felt lined playing surface for cards or dice. Measures: 32"L x 17"H x 18"D. ***Buyer Must Arrange Shipping***

6 x 6 Typical shoulder mounted bull elk. Approximate dimensions 50 H x 42 W x 38 D. Local pickup or you must make shipping arrangements. Damage to nose otherwise good.

With floral decoration on sides. Measures 40" tall by 39" wide and 15" deep.

Black plastic base featuring large red Zippo flame logo and Zippo text. Multi sided with 96 Zippo slots. Lights turn on and the display case rotates. Measures 65-1/2"H x 13-1/2" W x 13-1/2" D

Horse fetish and heishi necklace all faux stones and a 3 strand turquoise and coral beaded necklace. A 3 strand faux turquoise necklace.

DB 300 AAC Blackout complete Upper. 16" "DB 300 Blackout 1:7" barrel with A2 style flash hider, 8 1/2" ported, free float handguard, full length rail with 2 1/4' rails at the 3, 6 & 9 o'clock position, T-marked integral rail on receiver, dust cover marked "DB 300 AAC", forward assist, shell deflector, charging handle, complete bolt carrier group, black anodized finish, matte gray bolt, MGPCQB Armor gen 1 Tactical Foldable Front & Rear Sights installed. Very good condition, bore is excellent/bright.

1) Unfitted, Ruger M77 Walnut Target style stock with thumbhole grip, contrasting grip cap and fore tip, 2 1/4" forearm, 33 1/4" length, vented Pachmyer recoil pad, high comb cheek rest. 2) CZ 527 American (7.62x39mm) 29 1/2' black polymer stock, solid rubber recoil pad, sling studs. Both in new condition.

Sportized Indian military bolt action rifle chambered in 7.62 NATO dated 1965 and manufactured in Ishapore. Black painted finished rifle features a 25" barrel, dovetailed front sight, 800m tangent rear sight, removable 10-rd magazine, bolt safety. Set in a green two-piece polymer stock with grip cap, solid rubber recoil pad and sling studs. Black finish shows much edge/handling wear and retains about 50%. Bore is good with rifling, lightly frosted and action is sound. Comes with spare 5-rd magazine. (2) Total. NRA Condition-Good. C&R Firearm

M4 configuration with carbine length gas-block. Unbranded flat-top receiver with integral rail, forward assist, dust cover, shell deflector, extended latch charging handle. 16" 5.56 NATO SOCOM barrel, 1:7 twist, ported muzzle break, F-marked A2 front sight base, missing post, bayonet lug, no bolt. Black anodized finish, FDE AB Arms handguard. Bore is very good/bright.

Measures: 34"H x 45"D x 34"W

Austrian made 'Gen 5' model Glock, a striker-fired safe-action semi-automatic compact pistol chambered in 9x19mm Luger. The Gen 5 models were introduced by Glock in 2017. Pistol features a nDLC (Diamond Like Coating) satin black finished slide, 4.02" barrel with 'Marksman' rifling, polymer fixed front sight with white dot, dovetailed white outlined square notched rear sight, smooth curved trigger with an integrated blade safety, full-length guide rod assembly with dual captive recoil springs, bull-nosed slide with front and rear slide serrations, textured front trigger guard, ambidextrous serrated slide stop, accessory rail on dust cover, serrated and reversible push-button magazine release, serrated slide cover plate, flared magazine well, modular backstrap and beavertail system (MBS), and durable black polymer frame with a small square textured non-finger grooved grip. Pistol retains approximately 99% of its original nDLC finish with nothing remarkable. Metal displays no rust, or deformation. The action is smooth and crisp, and the bore is bright with strong 'Marksman' rifling. The frame polymer is also in excellent condition with little to speak of. This pistol is 'like-new' in box, and still has the factory copper-colored Loctite C5-A anti-seize lubricant in the slide (used for break-in). Pistol includes the original factory foam lined hard case with documents, lock, cleaning tools, three OEM magazines total, two extra backstraps with tool, and a magazine speed loader. Condition is NRA Excellent - Like New. ***Modern Firearm***

Yugoslavian made bolt action military rifle chambered in 8mm Mauser, imported by Cherry's Fine Guns out of Greensboro, NC. The M48s without a 'M48' suffix on the receiver ring were manufactured between late 1950 and early 1952, and the features of this rifle suggest that it was manufactured within this date range. Rifle features a nitrate blued/black finish, smooth turned down in-the-white bolt handle, in-the-white bolt, an approximately 24" barrel, smooth curved trigger, stripper clip guides cut into receiver, left receiver rail bolt release, hooded inverted 'V' front sight, tangent style rear sight graduated to 2000 meters, bayonet lug, milled trigger guard, and manual flag type safety. The furniture consists of a smooth semi-pistol grip hardwood shoulder stock, smooth handguard and forend, sling slot in the buttstock, sling loop on the rear barrel band, milled lower band, 'H' style barrel band, and smooth steel in-the-white butt plate. The serial numbers (K19323) match on the receiver, magazine floorplate, stock, and bolt handle. Receiver ring is marker with the Yugoslavian crest and 'M48'. Proof marks can be found on the bottom of the pistol grip. The left receiver rail is marked with a Cyrillic lettered word and the number '44', which translates to 'Factory 44'. The original nitrate black finish retained is approximately 90% with general thinning, some scattered scratches, and edge wear. Metal displays no deformation, but there was light rust observed on the butt plate, and on the rear of the trigger guard. The action is smooth and crisp, and the bore is bright with strong rifling. Furniture wood is good with superficial handling marks, small dents, 1-1/2" crack on the top of the shoulder stock, and a small piece of the stock may be lifting at the tang (it's hard to tell). Condition is NRA Good. ***Modern Firearm - C&R Eligible***

Gun Vault mini handgun safe. 4-key keypad for easy entry. Measures: 8"W x 5"H x 12"D.

Includes: Ozark Trail mini pocket knife w/ blade, file, scissors. USMC marked folding knife, 4" blade, 9.5" overall. Frost Cutlery folding 2.5" blade, 6" overall. Ridge Runner folding 2.5" blade, 6" overall with stag style handle. Frost Cutlery folding 2.5" blade, 6.5" overall. Frost Cutlery folding 2.5" blade, 6" overall. Steel Warrior 2 blade folding knife 1.5" & 2" blades, 5" overall. Steel Warrior 4 blade folding knife 1.5" blade, 5" overall. Rite Edge 3.25" blade, 8" overall. Smith & Wesson 3.25" blade, 8" overall. Browning 3" blade, 7" overall. CRKT Garmin B.U.L.L. 3" blade, 7" overall. CRKT Wrangler 2.5" blade, 6.25" overall. Gerber 1" & 1.5" blades, 4.5" overall.

Original Civil War Model 1850 Field & Staff officer’s sword in nice condition complete with its metal scabbard. A U.S. Civil War M1850 patterned Foot Officer's sword marked by W. Clauberg is a imported privately purchased officer's blade manufactured by the renowned German firm in Solingen, Prussia. Ricasso stamped "W. Clauberg Solingen" with "Standing Knight' logo. The blade measures approx. 34 1/4" inches in length and 1.00 inch wide at the ricasso. It has an unstopped wide fuller and a narrow fuller. Both sides of the blade are etched. The obverse side starts with foliate leading to a large "U.S." US flag followed by a section of more foliate. The reverse is etched with a American Eagle with spread wings with sun burst design cluching a "E. Pluribus Unum" banner in it's beak set amongst a field of foliate. Blade exhibits the original bright finish with small amounts of dark spots/mottling scattered in areas. Etching is clear. No nicks or sharpening. Leather washer in place. The hilt features a 2 branch guard with floral/leaf designs, has a dark patina, original grips are tight and consist of a grooved, wooden center-swell handle wrapped in sharkskin. Twisted brass wire is complete and bound tightly around the handle. Hilt is tight to the grips. Even though to sword is in decent shape with scabbard is in what you would call "Battlefield Pick-Up" condition, heavy rusted in upper areas, The brass throat & drag have a dark patina and the copper alloy belt loop fittings have turned a teal green with oxidation. Many people like these in the untouched condition, but should improve a lot with a good cleaning.

One leather Shriners wallet inscribed with the letter G insignia, two belt buckles and one money clip

Unmarked receiver. Features a 16" 5.56 NATO 1:9 SOCOM barrel with A2 flash hider, mid-length gas block with rail & sling stud, flat top receiver integral T-marked rail, dust cover, forward assist, shell deflector, charging handle, complete bolt carrier group, 6" polymer handguard with full rail on top & bottom, 3" rail at 3 & 9 o'clock. Overall very good condition with some scuffs on the barrel, bore is very good/bright.

Contains Hard backs, Soft backs, and Magazines relating to firearms, hunting, old west, and general subjects. Publications range from the early to late 20th century. From the estate of author Larry Shelton, used in his research. NOTE: LOT WEIGHS 50-60 LBS. SHIPPING WOULD BE VERY EXPENSIVE

Springfield M1A accessory lot. Includes a new condition M1A laminated stock with hinged buttplate, rear sling swivel and front sling stud, Four SA 20-rd magazines still in the packaging, two SA 10-rd magazine still in the packaging, One SA flush fit 5-rd magazine, two 30-rd magazines, 6 20-rd magazines, 2 marked "W" (Westinghouse Electric.) and 1 SA, Four 10-rd magazines and one 5-rd magazine. (19) magazines Total. Springfield M1a manual, USGI M14 Technical manual, M1A recoil buffer, gas plug cleaning drill, gas cylinder wrench and 2-piece piston cleaning drill set. All in very good condition.

Pump action shotgun features 26" plain barrel, fixed Modified choke, brass front bead, blued finish, wood stock & pump handle, ventilated rubber recoil pad, manual safety. Manufactured 1962-72. Bore is excellent/bright. Retains about 95% blue, with bare metal on sharp edges & where action rubs, minor edge wear & scratches. Wood is good solid condition, with scratches & some finish loss. Recoil pad is hard, action is smooth. Condition is NRA Good++ *** C&R Firearm ***

Austrian made sub-compact semi-automatic striker fired pistol chambered for 9x19mm Luger. The 43x MOS (Modular Optic System) was introduced in 2019, and designed for concealed carry. It combines a Glock 43 slide with a longer grip. Pistol features a matte black nDLC (Diamond Like Coating) slide finish, bull-nosed slide with front and rear cocking serrations, micro-optic cut slide, a 3.41" Marksman rifled barrel, tritium fixed blade front sight with a white outline, serrated dovetailed tritium square notched rear sight, slim accessory rail on the dust cover, full-length guide rod assembly with dual captive recoil springs, serrated curved trigger with an integral blade safety, firing pin safety, reversible push-button magazine release, and a slim black polymer single-stack frame with small square texturing. The original nDLC finish retained is approximately 99% with nothing remarkable. Metal displays no rust, or deformation. Bore is bright with strong rifling, and the polymer frame is in excellent condition with little to speak of. The action is smooth and crisp. This pistol is 'like-new' in box, and still has the factory copper-colored Loctite C5-A anti-seize lubricant in the slide (used for break-in). Pistol includes the original factory foam lined black plastic hard case with end label, instruction manual, cleaning tools, cable lock, torx wrench for optic mounting, magazine speed loader, and two magazines total. Condition is NRA Excellent - Like New. ***Modern Firearm***

Includes (4) leather head stalls, and (2) pairs of leather reins. All in rustic condition.

Specially designed for reloading the .50 Browning Machine Gun cartridge, this RCBS press accepts 1-1/2" .50 BMG dies. The RCBS Ammomaster features a large 1-1/2" solid steel ram providing the strength to load the .50 BMG. This kit includes the instruction manual, press, full-length sizer, seating die, shell holder, ram priming unit, case lubricant, and a trim die. This unit appears to be new in-the-box, with a very minimal amount of oxidation on the ram.

Includes: Unmarked 5" blade, 9" overall with stag handle and leather sheath. Unmarked 4" damascus blade, 9" overall, unmarked, bone or antler handle and leather sheath. Ridge Runner 7.5" blade, 12" overall, stag handle and nylon sheath.

Beautiful full Zebra rug in excellent condition. Measures: 102" x 78"

Measurements: 29"H x 11"W x 19"D. Excellent condition. ***Shipping Must Be Arranged By Buyer***

Black anodized finish, 16" 5.56 barrel with Phase 5 FATman Hex muzzle Brake - 5.56 installed, unmarked flat top upper receiver with integral T-marked rail, shell deflector, forward assist, inside of dust cover marked "Surprise Asshole!!" No charging handle or bolt. 15" slope nose LPSN free float Rail MLOK Handguard, Phase 5 mini hand stop, MBUS adjustable flip sights installed on rail. Very good condition, bore

Unique collector items for celebrating fraternal bonds. Vintage hand crafted designs from classic crests to unique pieces of distinguished style

A round beaded necklace with sterling and lapis pendant maker marked KY. A sterling and nugget lapis single strand necklace.

Includes: Timber Wolf 5.5", 10" overall with stag-style handle and leather sheath. 6" blade, 11" overall with stag handle and leather sheath, Maker marked. Timber Rattler 2 knife set, 7" blade,12" overall and 4" blade, 8" overall, both with stag handle and leather sheath.

Complete and upgraded. FDE finish, 16" 5.56 NATO 1:8 SOCOM threaded barrel with thread protector, UTG PRO Keymod 15" Free Float Handguard with full length T-marked rail, 2 1/4' rail at 6 o'clock, black BCM foregrip. Unmarked flat top receiver with integral rail, dust cover, shell deflector, forward assist, BMC Gunfighter charging handle with extended latch, complete bolt carrier group. Daniel Defense fixed, Aircraft Grade 6061-T6 Aircraft Grade aluminum, protected elevation-adjustable front post sight & DD adjustable two position flip peep rear sight. Excellent condition, bore is excellent/bright.

From Larry Shelton collection. I cherried out to ball marked "Liddle & Kaeding" (San Francisco). 3 large bore rifle unmarked that are worn and rusty, but good cavities. Two medium size with good cavaties. 1 may be for .31-36 pistol. 6 total.

Unmarked upper receiver except for "SS37", dust cover, forward assist, shell deflector, charging handle, complete bolt carrier group. 16" 5.56 NATO 1:7 threaded barrel with thread protector. Full length, free float handguard with angled fore grip, 4 rail covers on each side, full length rail with Magpul MBUS pop-up sights installed. Excellent condition, bore is very good/bright.

Vintage American made take-down pump-action rimfire rifle chambered for .22 Long, and manufactured circa 1916 in New Haven, CT. Rifle features a blued finish, an approximately 24" octagonal barrel, dovetailed blade front sight, elevation adjustable rear sporting sight, 3/4 length magazine tube under barrel, smooth curved trigger, single action bar, external hammer with a checkered spur, and a take down screw on receiver's left side. The walnut furniture consists of a smooth straight gripped shoulder stock, corn cob style pump handle, and a smooth metal crescent butt plate. The original blued finish retained is approximately 50% showing general thinning, and a mottled gray/brown patina brown or bare metal. Most of the blue color remains on the barrel, and other protected areas. Metal displays some very subtle deformation in some of the screw slots, and very bad engraving on the trigger guard. A few small scattered spots of rust with light pin-prick pitting were observed. Furniture wood is very good considering the age, and shows some pretty normal handling blemishes, and there is a gold colored sticker on the bottom of the shoulder stock. There is also a hole at the wrist in the shoulder stock. Action is smooth and crisp, and the bore shows some wear but there is decent rifling. Markings remain sharp and legible. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

Includes: Ruko Shark floating knife, 4.25" blade, 9.5" overall with plastic sheath. ALCE 4" blade, 9" overall with plastic sheath. Unmarked diving knife, 5.5" blade, 10" overall, with plastic sheath and rubber leg straps. Bugout 7.5" blade, 13" overall, with nylon sheath. Frost Cutlery2 knife set, 4.75" skinner blade, 9.25" overall and 3.5" blade, 7.5" overall with nylon sheath.

Turkish made semi-automatic striker fired pistol chambered for 9x19mm Luger, and imported by Gforce Arms out of Reno, NV. This pistol is compatible with Glock sights, and Glock 19 parts (Gen3 and Gen4). Pistol features a matte black QPQ nitride finish, an approximately 4.02" barrel, 4140 steel slide with optic cut, ported slide, fixed red fiber optic front sight, dovetailed green fiber optic rear sight, dual recoil spring assembly, front and rear slide serrations, serrated push-button magazine release, extended slide stop, square textured grip straps, granulated texturing on the grip panels, magazine funnel, picatinny accessory mount on dust cover, undercut trigger guard, and serrated curved trigger with passive integral blade safety. The original nitride finish retained is approximately 99% with little remarkable. Metal displays no rust, or deformation. The action is smooth and crisp, and the bore is bright with strong rifling. The polymer is in excellent condition with nothing to speak of. Pistol includes original black plastic foam lined factory hard case, two 15-round magazines total, trigger lock, and owner's manual. Condition is NRA Excellent. ***Modern Firearm***

Includes: (1) TFD ladder fire truck. Some rust and missing some paint . Ladder extends and retracts. Overall good condition for age. (1) DM Vintage Show Car cab over car hauler with trailer. Yellow paint and decals are in excellent condition. Comes with chock blocks and jacks. (1) Maroon duelly truck with log hauling trailer. Paint is in excellent condition. comes with 23 logs. (2) Keystone toy cars (1 red fire truck and 1 blue vintage car).

Nicely barn-wood framed lithograph of John Wayne photographed in an off camera moment on the set of a movie. Includes a framed John Wayne Filmography. The lithograph in frame measures 19 1/2" x 16 1/2"; the filmography measures in frame 16 1/2" x 13 1/2".

Mount is in excellent condition. Measures 33" x 17" x 21". ***BUYER MUST ARRANGE SHIPPING***

in gray frame entitled Ghost Figures by Victor D. Graff. Measures 24" x 20"

2 strand faux turquoise and oyster necklace with jukla. Second is a silver colored beaded necklace with turquoise colored beads.

Includes: Timber Wolf 6" blade, 11" overall with wood handle and nylon sheath. Timber Wolf 6" blade, 11" overall with blue stained wood handle and nylon sheath. Frost Cutlery 10" blade, 15" overall with green stained wood handle and nylon sheath. Mossy Oak 7" blade, 12" overall with leather sheath. Unmarked 5" blade, 9" overall with wood handle and nylon sheath.

American made 5-round double-action revolver chambered for .44 Special, and manufactured in Stratford, CT. The Charter Arms Bulldog was introduced in 1973. A Stratford, CT. address line suggests that this revolver was produced after 1974, but it is hard to determine the exact date of manufacture. Revolver features a brushed stainless steel construction, 3" tapered barrel, raised fixed blade front sight, notched top strap rear sight, serrated curved trigger, 5-round fluted cylinder, serrated cylinder release, un-shrouded ejector rod, knurled ejector rod head, external hammer with a serrated spur, frame mounted firing pin, transfer bar safety, and two-piece checkered hardwood grips with gold-toned Charter Arms medallions on both sides. The original satin stainless finish retained is approximately 98% with a few very light scratches. Metal displays no rust, or deformation. Bore is bright with strong rifling, and the cylinder chambers are also in excellent condition. Action is smooth and crisp with a tight cylinder lock-up. The hardwood grips are in near very good condition with minimal edge wear, and some finish loss. Revolver includes the original factory cardboard box with end label, two speed loaders, a Tyler T-Grip (adds finger grooves to the front strap), smooth black plastic Barami Corp. grips, and smooth hardwood grips with gold-toned Charter arms medallions on both sides. Condition is Near NRA Very Good. ***Modern Firearm***

Features manually adjustable M1-type windage and elevation adjustment. The accuracy of the windage and elevation adjustment is set to 1/4 M.O.A. per click. Mil-Dot reticle, factory lens covers, SFP, 6061-T6 Aircraft Quality Aluminum. Scope is like new, clear optics. Comes in factory box with non-matching label for storage.

Marked "hazards, LA Calif." 4 total. Fair to good condition. Some rust. 1 marked "pat. July 15, 89".

Includes: Elk Ridge 5.5" blade, 10" overall with wood handle and nylon sheath. Hibbon Knives 3.5" blade, 8" overall with black stained wood handle and leather sheath. Browning 4" blade, 8" overall with wood handle and nylon sheath. Colt 4" blade, 8.5" overall with wood handle and nylon sheath. Elk Ridge 3.5" blade, 8" overall with wood handle and nylon sheath.

Includes: Cast iron green wagon with yellow accents 2 horses (wagon tongue is broken). (1) Cast iron green wagon with red tongue and wheels. (1) Plastic green wagon with yellow wheels. (1) John Deere combine with 2 attachments. Paint and decals are in excellent condition. (1) Small John Deere tractor in excellent condition. (1) Cast iron tractor, green with yellow wheels. Large cast iron tractor with green body and yellow wheels. (1) Rocket Racer tin friction litho rocket car. Paint is in great condition. Missing vertical tail fin. (1) IPlay Happyland rocket. Missing top door.

American made semi-automatic rimfire rifle chambered for .22 Long, or Long Rifle, and manufactured in New Haven, CT. The Model 190 was in production from 1967 until 1980, and the exact date of manufacture cannot be determined. Rifle features a blued finish, black finished receiver with dovetailed optic rail (damaged), 20-1/2" round barrel, dovetailed blade front sight, smooth curved trigger with beveled edges, elevation adjustable sporting rear sight, full-length magazine tube, manual bolt hold open (push in charging handle with bolt back), and an annular cut trigger guard mounted push-button safety. The hardwood furniture consists of a smooth semi-pistol gripped shoulder stock, smooth forend, and a black serrated Winchester butt plate. The original blued finish retained is approximately 97% with scratches, and edge wear. The black receiver finish retained is about 85% with finish missing on the sides of the dovetail, edge wear, and some scratches. Metal displays damage to the receiver's optic rail to the point it may not function as a mounting platform. Rust was observed on the barrel and magazine tube. The action is smooth and crisp, and the bore is bright with strong rifling. Furniture wood is in good and sound condition with some handling blemishes, and significant finish losses. Condition is NRA Good. ***Modern Firearm***

'The Speedmaster,' an American made vintage tube-fed semi-automatic sporting rifle chambered in .22 Long Rifle, manufactured circa 1935-1951 in Ilion, NY. The barrel is marked "22 LONG RIFLE ONLY - SMOKELESS - GREASED". Rifle features a blued finish, an approximately 24" take-down barrel, dovetailed globe front sight with an aperture insert, elevation adjustable rear sporting sight, fully adjustable Redfield target sight mounted at the rear of the receiver, smooth curved case-hardened trigger, serrated breech block, annular cut trigger guard mounted push-button safety, smooth walnut beavertail forend, semi-pistol grip shoulder stock with loading port, and checkered metal butt plate. Barrel stamped number "099" matching the receiver serial number "6099". The original blued finish retained is approximately 86% with general thinning on the barrel and receiver, edge wear, light handling blemishes, and the finish taking on a gray/brown patina. Metal displays no rust, or deformation. The bore is bright with strong rifling, and the action is smooth and crisp. Furniture wood is in fair condition with handling marks, a crack on the forend, and the shoulder stock fits loose. Condition is NRA Good ***Modern Firearm - C&R Eligible***

Multi-strand silver bead mesh necklace with large handmade granulated spacer beads. Two sterling silver braclets one thick hinged bangle inscribed "Mexico TN-03 925" inside and the other inscribed 925 inside.

Mount is in great condition. Measures 32" x 18" x 19". ***BUYER MUST ARRANGE SHIPPING***

First one is a beaded turquoise slab necklace and a faux turquoise beaded necklace.

A Timber Rattler bowie knife with dark pakkawood, brass guard, stainless steel with matching brown leather sheath embossed Timber Rattler rattlesnake logo. 12" overall with 6" blade A Boker Applegate Micarta with matching black leather sheath. 11" overall with 6" blade. A stainless steel pakkawood dymalux style hibben knives with matching black leather sheath. 9.5" overall with a 4.5" blade. A Hibben Knives Tundra Hunter GH5077 420HC. Matching leather sheath. 11" overall with a 6" blade. A tactical One Shot One Kill 310 MIL with rubberized grip and black plastic sheath 9" overall with a 4-1/2" blade.

American made semi-automatic pocket pistol chambered for .380 ACP, and manufactured circa 2023 in Mayodan, NC. Pistol features a black oxide finished slide, an approximately 2-3/4" barrel, front and rear slide serrations, dovetailed tritium front sight with white outline, dovetailed serrated U-notched rear sight, black polymer frame with granular texturing on all sides with Ruger logos on both grip panels, smooth curved trigger with integral passive blade safety (Safe Action Trigger), metal full-length guide rod, serrated slide stop, serrated front trigger guard, and serrated reversible push-button magazine release. The original black oxide finish retained is approximately 99% with little to speak of. Metal displays no rust, or deformation. The action is smooth and crisp, and the bore is bright with strong rifling. The polymer frame is in excellent condition with nothing remarkable. Pistol includes the original cardboard box with end label, manual, sticker, lock, five 10-round magazines total, magazine speed loader, and a spare magazine base plate. Condition is NRA Excellent. ***Modern firearm***

1) The Aeon 3-12x50 SF (Side Focus) scope is popular among precision air gunners. 30mm tube, Side Focus (SF), often allowing focus down to 10 yards, 1 click-1/4"MOA , Field Target reticle. Very good condition. 2) Tasco RF 4x15 scope, light duplex reticle, lens caps, rings. Very Good. 3) Pine Ridge R17 3-9x40 17 HMR scope, 1/4"-1 click, light duplex reticle. Very good.

And equipment from the Larry Shelton collection. 13 pieces total. 3 marked "C.D. Ladd, San Francisco". Fair to rough condition.

American made reproduction of a single-shot percussion gun chambered for .62 Caliber ammunition. A blanket gun is a Native American black powder rifle or shotgun that has a cut-down barrel and stock to conceal under a blanket. This firearm features a blued finish, an approximately 16" 1/3 octagonal barrel (2/3 round), fixed blade front sight, rear sight dovetail notched for sighting with no separate rear sight, smooth curved trigger, external hammer with a smooth spur, sling swivel mount on the trigger guard, and a cleaning rod under the barrel. The hardwood furniture consists of a smooth straight gripped shoulder stock, smooth forend with a barrel band, and a smooth metal butt plate. The lock plate reads "TOWER", and a crown is marked in front of the hammer. The original blued finish retained is approximately 20% with handling blemishes, and the finish taking on a mottled grey/brown patina. Metal displays a few small spots of rust, with dings, and pitting. The trigger is cracked and bent to the right. The action seems to function, and the bore is smooth and dark. The furniture wood is in fair condition with a crack in front of the lock. Condition is NRA Poor. ***Antique***

Includes: (2) Toolbox lids. 1 retains most green paint, 1 retains little original paint. (1) thermostat. Paint and lettering are in excellent condition.

'The Off-Hand', American made single-shot under-hammer percussion muzzle loader chambered for .45 Caliber ammunition, and manufactured in West Hurley, NY. Rifle features a blued finish, an approximately 32" octagonal barrel, barrel drilled and tapped for optic mounting, rear receiver drilled and tapped for 'lollipop' rear sight, dovetailed blade front sight, dovetailed notched rear sight, smooth curved trigger, trigger guard acts as a hammer spring, external hammer under barrel with a serrated spur, and a wooden ram rod under the barrel. The walnut furniture consists of smooth straight gripped shoulder stock, smooth forend, and a black checkered plastic butt plate. The original blued finish retained is approximately 98% with only light handling blemishes, and the receiver is turning slightly plum. Metal displays no rust, or deformation. The action is smooth and crisp, and the bore is filthy with dust, but the rifling is sharp. The hardwood furniture is near excellent with an impression, and minor handling marks. Condition is NRA Near Excellent. ***Antique***

American made direct impingement semi-automatic centerfire modern sporting rifle chambered for 5.56x45mm NATO, and manufactured in Cocoa, FL. Rifle features a matte black anodized upper an lower receiver set, flat-top picatinny upper receiver, a 16" medium contour barrel (4150 CrMov, 1:8 twist, Black Nitride is DB typical), 1/2"-28 muzzle threads, M16A1 style 3-prong flash hider, 15" free-float M-Lok handguard with picatinny rail sections at the front and rear, M-Lok rail covers installed, no iron sights, shell deflector, annular cut bolt assist, annular cut push-button magazine release, flared magazine well, Mil-Spec single-stage trigger (maybe nickel teflon coated), Mil-Spec trigger guard, dust cover that reads '5.56 NATO', Mil-Spec charging handle, serrated receiver mounted manual safety, serrated paddle magazine release, black Magpul MOE rubberized over-molded pistol grip, black Magpul CTR style (not marked Magpul) stock with a black rubber recoil pad and quick disconnect sockets, Mil-Spec six-position receiver extension, staked castle nut, Mil-Spec style buffer and spring, M16 style side venting bolt carrier, and a staked gas key. The original matte black finish retained is approximately 97% with minor blemishes, light scratches on the bottom of the handguard, and a small amount of contact wear on top of the rear handguard rail. Metal displays no rust, or deformation. The action is smooth and crisp, and the bore is bright with strong rifling. The furniture polymer is in excellent condition with nothing remarkable. Rifle includes no magazine. Condition is Very Good to Excellent. ***Modern Firearm***

Measures 11" H x 14"W. Depicts central oval cartouche containing stylized winged insect.

American made semi-automatic striker fired micro-compact pistol chambered for .30 Super Carry, and manufactured in Springfield, MA. Pistol features a matte black Armornite slide finish, and approximately 3-1/8" barrel with a crowned muzzle, optic cut slide, dovetailed tritium front sight with an orange outline, dovetailed tritium notched rear sight, full-length dual spring recoil assembly, loaded chamber view port, serrated take-down lever, serrated slide stop, serrated frame mounted manual safety, smooth curved trigger with integral blade safety, reversible granular textured push-button magazine release, polymer frame with under cut trigger guard, and granular textured grip. The original black Armornite finish retained is approximately 99% with nothing remarkable. Metal displays no rust, or deformation. The action is smooth and crisp, and the bore is bright with strong rifling. The frame polymer is in excellent condition, but it is dirty. Pistol includes the original factory cardboard box with end label, instruction manual, lock, and two magazines total (13-round, and 16-round capacities). Condition is NRA Excellent. ***Modern Firearm***

'The Field Master,' a vintage American made take-down pump-action rimfire rifle chambered for .22 Short, Long, or Long Rifle, and manufactured circa 1941. The Model 121 was in production from 1936 until 1954. Rifle features a blued finish, 24-3/4" tapered barrel, dovetailed blade front sight with silver colored bead, elevation adjustable rear sporting sight, 3/4 length tube magazine, annular cut trigger mounted cross-bolt safety, and a knurled takedown screw on the right side of the receiver. The walnut furniture consists of a smooth semi-pistol gripped shoulder stock, grooved pump handle, and a factory checkered metal butt plate. The original blued finish retained is approximately 94% with some minor thinning, contact wear from the action, and the finish taking on a dark gray patina with some brown hues. Metal displays no deformation, but there was rust observed on the butt plate and on the barrel. The action is smooth and crisp, and the bore is bright with strong rifling. Furniture wood is in good condition with a fair amount of heavy handling marks. Condition is NRA Good ***Modern Firearm - C&R Eligible***

A United Cutlery Honshu Conqueror Bowie knife model UC3321. 10-7/8" blade 16-1/2" overall. A Pig sticker 440 Stainless steel with black nylon sheath. 15" overall with a 10" blade. A BUDK Military Rescue Tanto BK622. 12-1/2" overall and 7-5/8" blade with a black leather sheath. A Smith & Wesson First Production Run Military boot knife series. 11" overall and 5.3" blade with a black leather sheath

One sterling beaded choker with sterling and turquoise pendant and a nugget style turquoise choker.

SWFA "Super Sniper" Unmarked, The original precursor to the SWFA SS, the Tasco Super Sniper, was built strictly for government and NATO contracts where visible branding was a disadvantage. When SWFA took full ownership of the "SS" line, they chose to maintain the original stripped-down, matte-black finish. Early production models featured no brand markings at all. Shockproof, waterproof, and fog proof. Originally designed to NATO specs to handle calibers up to the .50 BMG. Mil-Dot reticle. Very good, clear optics.

American made semi-automatic blow back centerfire modern sporting rifle chambered for 9x19mm Luger, and manufactured in Fort Smith, AR. FSAAP made the lower receiver with a proprietary vacuum molding and machining process providing a similar strength to 7075-T6 aluminum. They claim a 15% production cost, and an increase in output capacity by 50 times per hour. Rifle features a matte black finish, picatinny flat top slick-sided upper receiver, a 16" 4150 CrMov medium contour barrel with a 1/10 twist rate, 1/2"-36 muzzle threads, serrated flat-faced drop-in trigger, A2 bird cage style flash suppressor, 15" M-Lok free-float handguard with hexagon lightening holes, no iron sights, dust cover, Mil-Spec charging handle, serrated magazine release, serrated receiver mounted manual safety, no bolt stop/release, flared magazine well, oversized trigger guard, black Magpul MOE K2 pistol grip with a storage compartment, pistol bolt carrier, pistol buffer and spring, Mil-Spec six-position receiver extension, end plate with dual sling attachment points, and a black Magpul MOE style (not marked Magpul) stock with quick detach sockets and a rubber recoil pad. The original matte black finish retained is approximately 98% with a few light scratches on the rear of the receiver. Metal displays no rust, but there is slight mounting deformation in an accessory slot on the left side of the handguard. Action is smooth and crisp, and the bore is bright with strong rifling. Furniture polymer is in excellent condition with nothing remarkable. Magazines not included. Condition is NRA Near Excellent. ***Modern Firearm***

3 out of the 4 are signed on bottom, the unsigned pot has a chip at rim. Largest measures 5 1/2" wide and 2" tall, smallest is 2 1/2" tall and 2 3/4" wide with chip at rim. Other 2 in good condition.

The USN MK2 (officially US Navy Mark 2 Fighting Knife) is a legendary combat and utility knife first introduced in 1942 during World War II. Widely used by both Navy sailors and Marines. Features a blued 7-inch clip-point blade with blood groove, stacked leather washer handle, a steel crossguard stamped on the underside "USN MK2", "KA BAR". Produced under Navy contract by KA-BAR (Union Cutlery), durable, corrosion-resistant slate-grey fiberglass/plastic scabbard, Front of scabbard throat stamped "U.S.N. MK 2", rear marked "Nord-6581", "B.M. Co.", "7" and "VP" with stars. Knife and scabbard are both in very good condition, blade has most of the original blue with some friction wear from the scabbard, no nicks.

Includes original photographs, articles, and historical information circa 1931 and 1932 from an Omnibus College ("America's college on wheels") tour. Also included are memorabilia belonging to Helen Keller.

Cast iron steer door knocker. Measures 8"H x 9"W

Unique collector items for celebrating fraternal bonds. Vintage hand crafted designs from classic crests to unique pieces of distinguished style

19" x 36" piece featuring multiple detailed Orthoceras shells against a dark limestone background. WEIGHT: 53.15 POUNDS. BUYERS MUST ARRANGE OUTSIDE SHIPPER - Shipping cost might exceed cost of item

Includes: Humvee 3 knife set 2", 3", and 3.5" blades 5", 7", and 8.5" overall. Ozark Trail 3" blade, 7" overall. Ozark Trail 3" blade, 7" overall. Ozark Trail 3" blade, 6.5" overall. Ozark Trail 3" blade, 7" overall. Winchester 3" blade, 6.5" overall.

Vintage WRA (Winchester Repeating Arms Co.) .33 Winchester (.33 WCF) orange label two-piece full ammunition box, contains twenty matched, rimmed, bottleneck cartridges, .338 diameter 200-grain soft point flat-nose bullet, W.R.A. Co. headstamps. Originally introduced in 1902 for the Model 1886 lever-action rifle, factory production ceased around 1940. Authentic two-piece boxes from the 1900s–1930s. The side labels are fully intact with the red "W" ink stamps, the top label is fully intact and the front label is mostly intact with 1 1/2' tear form when it was opened on the left side of the top and bottom halves. There is about 1/2' loss on the label. Still retains the nice orange color.

With center vinyl wrapped mounted on board. Measures 59"W x 16"H x 16"D

Leather bound bible with hand colored etchings. Browns self-interpreting family bible. Old and New Testaments by the last Rev. John Brown. In condition for age. Binding is separating.

A polished amethyst 2 strand beaded necklace, 3 necklaces with one strand stabilized turquoise beaded necklace and nickeled concho belt. Belt measures 32".

1-inch main tube, a 40mm objective lens, and standard 1/4 MOA windage/elevation adjustments, for tracking game at distances between 100 and 500 yards. Fine crosshair reticle. very good with a couple of minor scuffs, clear optics. Comes in factory box with non-matching label.

Spanish made military bolt-action "short" rifle chambered for .308 Winchester, and the receiver ring is not dated because it was scrubbed (also missing the crest). Imported by Samco out of Miami, FL. Manufactured between 1916 and 1951. This is one of the later 1916 variants with a tangent (not "Lange Vizier" or "roller coaster" sights) rear sight, no receiver ring markings, and a re-chambering from 7mm to 7.62x51mm. Rifle features a blued refinish, an approximately 22" barrel, protected dovetailed inverted 'V' front sight, elevation adjustable tangent rear sight graduated to 2000 meters, smooth curved trigger, milled trigger guard, stripper clip guide cut into the receiver and thumb notch cut into left receiver rail, early style bolt, left receiver rail mounted bolt release, gas venting hole in the left side of the chambered area, bayonet lug, cleaning rod under barrel, checkered flag type 3-position manual safety, and a military style floor plate. The hardwood furniture consists of a smooth straight gripped shoulder stock, smooth full-length forend, smooth handguard, barrel band with a sling swivel, sling loop on the left side of the shoulder stock, and a smooth metal butt plate. The retained blue refinish is approximately 95% with some edge wear, and small scratches. Metal displays no deformation, but light oxidative speckling was observed. The furniture wood is in good condition with handling marks, and a repair behind the receiver on the top of the wrist. Action is smooth and crisp, and the bore is bright with strong rifling. A tag on the rifle states to use only LIGHT hand loads. NRA Condition is Good. ***Modern Firearm - C&R Eligible***

Various makers and styles. Largest measures 10 1/2" tall and smallest is Hopi and 1 1/4" tall. One pot has chip at rim.

Arthur James Menchego, born in 1950, is a listed Santa Ana Pueblo artist. The painting features a Native American head portrait. Signed lower right. Measures approximately 4-1/2" across x 6-1/2" tall, matted and framed measures approximately 11" across x 13" tall.

#bf207000 Croatian made semi-automatic striker fired micro-compact pistol chambered for 9x19mm Luger, and imported by Springfield Armory out of Geneseo, IL. Pistol features 3.7" hammer forged barrel, optics cut billet slide with a Melonite finish, front and rear slide serrations, dovetailed tritium front sight with a yellow outline, dovetailed white outline "U" notched rear sight, dual captive recoil spring with full-length guide rod, smooth straight trigger with a passive blade safety, loaded chamber view port, serrated slide stop, serrated take-down lever, reversible serrated push-button magazine release, black polymer frame with 'Adaptive' granular texturing, subtle finger grooved front strap, beveled magazine well, and accessory rail on dust cover. The original Melonite finish retained is approximately 99% with little to speak of. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. The frame polymer is in excellent condition with nothing remarkable. Night sight retains a strong glow. Pistol includes the original back cardboard box with end label, lock, test target, magazine speed loader, and five magazines total (three 15-round, and two 17-round magazines). Condition is NRA Excellent - like new ***Modern Firearm***

American made bolt-action centerfire rifle chambered for .222 Remington, and manufactured circa 1968 in Ilion, NY. The Model 788 chambered in .222 Rem. was first produced in 1967 until 1979, and then produced again from 1982 until 1983. Rifle features a blued finish, receiver drilled and tapped for optic mounting, short action, 24" tapered barrel, barrel drilled and tapped for iron sights, straight bolt handle, accepts detachable magazines, serrated right receiver mounted manual safety, and a smooth curved trigger. The hardwood furniture consists of a smooth semi-pistol gripped shoulder stock, smooth forend with a sling stud, sling stud in the bottom of the shoulder stock, and a serrated factory black plastic butt plate. The blued finish retained is approximately 65% with some handling marks, edge wear, and very thin finish on the receiver and bottom metal. The finish appears to have different levels and tones of patina. Metal displays no deformation, but does have a rust colored spot on the trigger guard, and what may be rust inside the bolt knob. Furniture wood is in good condition with handling blemishes, and marks left by sling swivels. The action is questionable, the trigger functions, but we were not able to release the bolt. The bore shows rifling and some oxidation speckling. Rifle includes one magazine total. Condition is NRA Poor - Missing Parts ***Modern Firearm - C&R Eligible***

Includes: Amazon Jungle Survivor 9.5" blade, 15" overall with nylon sheath. Titan 7" blade, 12 overall with kydex sheath. (2) Timber Wolf 3.5" blade 7.5" overall with nylon sheaths. Coast 6" blade, 11" overall with rubber handle and nylon sheath. Ka-Bar TDI 3.5" blade with serrations, 7" overall with kydex sheath and belt clip

This is a full 5-round box of UMC 40 “Calibre”, 3 1/4" Sharps Cartridges. (.40-90 Sharps Straight). Box contains 4 original cartridges with no headstamps and one WRA reload. The green label box remains in excellent condition showing very light aged wear and presenting crisp corners and edges. The original cartridges rate excellent. The green label has a water stain but fully intact and readable.

7 Of Which Are Framed One Is Loose.

Ansel Adams Book " Yosemite the Range of Light" special edition signed for Time Life Books.1979 1st Edition Born 1902-1984) and Frank McCarthy Book "The Old West" limited Edition No 42/1500 signed. Both are in very good condition with dust jackets.

Interesting and high quality equipment from the Larry Shelton collection. Very good condition.

In poor condition BBL's cleaned with naval jelly. 30" long, no finish, bare metal

American made manual cocking single-shot bolt-action rifle chambered for .22 Short, Long, and Long Rifle. This Model 67 was manufactured circa 1934-1948. Rifle features a blued finish, 27" tapered barrel integral to receiver, dovetailed blade front sight with a silver-toned bead, elevation adjustable sporting rear sight, chromed smooth curved trigger, chromed bolt with a turned down handle, metal trigger guard, knurled cocking piece, and a manual flag type safety on the rear of the bolt. The walnut furniture consists of a smooth semi-pistol gripped shoulder stock, smooth finger grooved forend, no sling swivel accommodations, and a factory composition butt plate. The original blued finish retained is approximately 90% finish with some edge losses, and the finish taking on a dark gray to brown patina. Metal displays slight deformation in some of the screw slots, and a light oxidative peppering over the rifles entirety. The chrome finish on bolt is worn, and the furniture wood is in poor condition with cracks on the forend and under the left receiver rail. The bore is bright with decent rifling considering its age. Condition is NRA Poor. ***Modern Firearm - C&R Eligible***

American made single-shot rolling block rifle chambered for 7mm, and manufactured in Ilion, NY. Rifle features a color case finished receiver and blued finished barrel, an approximately 20-1/2" round barrel, dovetailed inverted 'V' front sight, unique elevation adjustable ladder and slide type rear sight, smooth curved trigger, external hammer with a checkered spur, checkered breach block, saddle ring on the left side of the receiver, and an extractor. The walnut refinished furniture consists of a smooth straight gripped shoulder stock smooth forend and handguard, sling swivel on the barrel band, sling swivel on the bottom of the shoulder stock, right side shoulder stock sling swivel, and a smooth metal butt plate. The original blued finish retained is approximately 60% with general thinning, and the finish taking on a dark gray patina. The case-color finish retained is approximately 10% with most of the receiver and components taking on a gray patina. The handguard metal, sling swivels, barrel band, saddle ring and receiver hardware, and the butt plate are chrome plated and in excellent condition. Metal displays slight deformation in a screw slot, some oxidation on the barrel, and sparse pin-prick pitting. The bore appears a little dark, but has strong rifling, and the action functions smooth and crisp. Markings are generally legible with the barrel's chambering mark partial, but still clear. The refinished furniture wood is good with light handling marks, and the finish application has flaws. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

Arthur James Menchego, born in 1950, is a listed Santa Ana Pueblo artist. The painting features a Native American with a hieroglyphic animal. Signed lower right. Measures approximately 4-1/2" across x 6-1/2" tall, matted and framed measures approximately 11" across x 13" tall.

Entitled Taos at Dawn. Signed lower left corner. Measures 30" x 26" in bronze color ornate wood frame. Print measures 19" x 15".

American made bolt-action rimfire rifle chambered for .22 Short, Long, or Long Rifle, and manufactured in New Haven, CT. The Model 42B was in production from 1938 until 1941 with the same basic specifications as the Model 42A. The Models 42A and 42B were redesigned with a new 'Master Action' that utilizes a shorter bolt and receiver. Rifle features a blued finish, receiver drilled and tapped for optic and sight mounting, an approximately 23" round barrel, S101/106 front sight with four inserts (missing hood), S102 fully adjustable sporting rear sight, serrated curved trigger, turned down bolt handle, serrated magazine release lever on magazine, and a rear receiver mounted serrated manual safety lever. The hardwood furniture consists of a smooth full-length semi-pistol gripped shoulder stock, smooth forend with a quick disconnect sling mount, quick disconnect sling mount on the bottom of the shoulder stock, finger grooved polymer trigger guard, and a serrated metal butt plate with a hinged trap door for a spare magazine. The original blued finish retained is approximately 97% with light handling blemishes, very light edge wear, and thinning around the mgazine well. Metal displays some slight deformatio in some of the screw slots, and the were a few very sparse oxidative speckling ont the barrel, receiver, and bolt handle. Furniture wood is in good to very good condition with some handling marks and light impressions. The action is smooth and crisp, and the bore is bright with strong rifling. Rifle includes two magazines total. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

Spanish made military bolt-action "short" rifle chambered for .308 Winchester, and the receiver ring is not dated because it was scrubbed. Imported by Century Arms International out of St. Albans, VT. Manufactured between 1916 and 1951. This is one of the later 1916 variants with a tangent (not "Lange Vizier" or "roller coaster" sights) rear sight, less receiver ring markings, and a re-chambering from 7mm to 7.62x51mm. Rifle features a blued refinish, an approximately 22" barrel, protected dovetailed inverted 'V' front sight, elevation adjustable tangent rear sight graduated to 2000 meters, smooth curved trigger, milled trigger guard, stripper clip guide cut into the receiver and thumb notch cut into left receiver rail, late style turned down bolt with gas port, left receiver rail mounted bolt release, gas venting hole in the left side of the chambered area, bayonet lug, cleaning rod under barrel, checkered flag type 3-position manual safety, and a military style floor plate. The hardwood furniture consists of a smooth straight gripped shoulder stock, smooth full-length forend, smooth handguard, barrel band with a sling swivel, sling loop on the left side of the shoulder stock, and a smooth metal butt plate. A crest is marked on the receiver, along with the serial number and chambering. The bolt, receiver, and magazine floorplate have matching serial number '2Z8282'. The retained blue refinish is approximately 82% with some edge wear, handling blemishes, general thinning with the finish taking on a dark gray patina. Metal displays slight deformation in some of the screw slots with small ding on some of the components. Some light oxidation and pin-prick pitting was observed on the barrel and barrel band. The furniture wood is in fair condition with impressions, handling marks, and a couple of burn marks on both sides of the action. Action is smooth and crisp, and the bore is pretty bright with decent rifling. A locking screw is missing from the floorplate, and the safety fits a bit loose. Most of the marking are clear and legible, but the crest is shallow and partially scrubbed. NRA Condition is Good. ***Modern Firearm - C&R Eligible***

American made magazine fed bolt-action rimfire rifle chambered for .22 Long Rifle only, and maufactured in Westfield, MA. The MK II wasa originally produced by Lakefield Arms, and Savage aquired the company in 1995 (MK II's are marked 'Savage' after 1995). Rifle features a cleaned finish (removed blueing), 11mm dovetailed receiver for optic mounting, an approximately 21" tapered barrel, dovetailed blade front sight, elevation adjustable sporting rear sight, smooth curved trigger, turned down bolt handle, smooth paddle magazine release moounted inside magazine well, and a serrated right receiver mounted manual safety. The black polymer furniture consists of a semi-pistol gripped shoulder stock with checkering at the wrist, checkered forend with a sling stud, sling stud in the bottom of the shoulder stock, and a black plastic factory butt plate. The original blued finish retained is approximately 4% with a small amount of blue color on the cocking piece, rear sight, and front sight blade. Metal displays no deformation, but there was sparse oxidative speckling observed in a few areas. The actions functions well, but feels real dry. The bore is bright with strong rifling, but is a little dirty. The furniture polymer is in good condition with several scuffs and scratches. Condition is NRA Fair. ***Modern Firearm***

1. Long Kentucky style rifle blank with stripping and looks like maple. Measures 56 1/2" x 7 1/2" at widest point of rear (butt area) by 2 1/4" thick. Purchased 30 years ago by Larry Shelton 2. 47 1/2" blank of medium color, probably walnut, tight grained. 5 1/2" width at butt area, 1 3/4" thick. Probably plains rifle (Hawken etc.). 3. Dark color stock blank, probably walnut, with pronounced wavy grain, 31 1/4" long, 5 1/2" butt area, 2" thick

Includes: 80% AR receiver. Geisler Defense Model 1917 80% kit, compatible with Glock 19 Gen 3 components. Glock 19 Gen 1-3 trigger kit. Also includes a PSA Dagger ODG frame. ***Modern Firearm***

Leupold Ultra 10x M3A (manufactured by Leupold & Stevens, or "L&S Inc."). Fixed-power tactical scope that was originally developed for military contracts, such as the U.S. Army's M24 Sniper Weapon System. 10x magnification, 30mm tube, Mil-Dot' reticle, Turret / Dial System-BDC (Bullet Drop Compensation) M3 style, marked specifically for 7.62mm NATO M118 ammunition. The M3 dial marked for 7.62mm NATO M118 is a specialized elevation turret. It is laser-etched to directly correspond to the bullet drop of the military's M118 173-grain or M118LR 175-grain Long Range ammunition. 2 1/4" sun shade, rings attached. Serial number "84 1134B" confirms the model with manufacture date of early 1994. Very good overall, has been wrapped in camo tape which is missing about a third from wear. Comes in non-matching Leupold box for storage.

Heart shaped pendant and Southwest oval style are 11"L and one is a turquoise shaped with two leaves bordering the stone 8-1/2"L

signed R. Palteko, all wood with minor damage to feather on headress, 8.5 inches tall by 11 inches wide

'Slugger', a Turkish made pump-action shotgun chambered for 3" 12 Gauge shells, and imported by Hatsan U.S.A Rogers, AR. The Hatsan Escort Slugger was introduced in 2020. Shotgun features a matte black finish, serrated aluminum receiver dovetailed for optic mounting, 18" chrome plated steel round barrel, fixed choke measures 'Cylinder' with a drop-in gauge, fixed blade front sight, annular cut trigger guard mounted push-button safety, dual action bars, 3/4 length tube magazine under barrel (5+1 capacity), smooth curved trigger, and front trigger guard mounted bolt release. The black polymer furniture consists of a semi-pistol gripped shoulder stock with large serrations, finger grooved contoured slide handle with large serrations, checkered polymer trigger guard, sling studs on the magazine tube cap, and bottom of the shoulder stock, 14-1/4" length-of-pull, and a black solid rubber recoil pad. The original matte black finish retained is approximately 99% with slight muzzle edge wear, and very light scratches that do not expose bare metal. Bore is bright and shiny, and looks like new, and the action is smooth and crisp. The furniture polymer is in excellent condition with superficial handling marks on the shoulder stock. Condition is NRA Excellent - Like New ***Modern Firearm***

Measures 81" x 73" Scattered losses to fur. Otherwise in good condition

American made semi-automatic carbine chambered for 9x19mm Luger, and manufactured in Mansfield, OH. The Hi-Point 995 was introduced to the market in 1996. Rifle features a blued finish, 16" barrel, elevation adjustable protected inverted 'V' front sight, micrometer adjustable rear peep sight, left side serrated charging handle with push-in bolt stop, textured left receiver mounted manual lever safety, serrated curved skeletonized trigger, picatinny accessory rail mounted under the barrel, and push-button magazine release. The polymer furniture consists of a pistol gripped shoulder stock with checkering and granular texturing, ribbed handguard with a picatinny rail on the bottom and a picatinny rail running over the top of the receiver, and a checkered spring loaded recoil absorbing butt plate. The original blued finish retained is approximately 98% with minor handling blemishes on the receiver, and contact wear from the charging handle. Metal displays no rust, or deformation. Bore is bright with strong rifling, and the action is smooth and crisp. Furniture polymer is in excellent condition with little to speak of. Rifle includes one magazine total. Condition is NRA Near Excellent. ***Modern Firearm***

Vintage American made magazine fed bolt-action centerfire rifle chambered for .30-30 Winchester, and manufactured in Chicopee Falls, MA. The Model 325-A was introduced in 1947, modified over three years, and was discontinued in 1950. The suffix after the model number represents the three improvements made over the production of the model, and the 'A' is a change to a pivot bolt guide system. The rifle features a blued finish, an approximately 21" tapered barrel, iron sights removed, serrated curved trigger, serrated magazine release at front of the trigger guard, right receiver mounted manual safety lever, left receiver rail drilled and tapped for optic mounting, dual extractors, and a flat turned down bolt handle. The refinished walnut stained birch furniture consists of a smooth semi-pistol gripped shoulder stock, smooth forend with a sling stud, sling stud on the bottom of the shoulder stock, no butt plate, and a slip-on Johns brown ventilated rubber recoil pad. The original blued finish retained is approximately 86% with edge wear, general thinning, and the finish taking on a mottled dark gray patina with some brown hues. Metal displays slight deformation in some of the screw slots, and a very smalll amount of rust on the trigger guard. Six holes were drilled and tapped for optic mounting on the left receiver rail. The action is smooth and crisp, and the bore is bright with strong rifling. The refinished furniture wood is in fair to good condition with a small crack at the front sling stud,and another at the rear sling stud. No magazine included. Condition is NRA Fair. ***Modern Firearm - C&R Eligible***

Includes: (9) AR-15 carbine recoil buffer. (1) AR-10 LR-308 collapsible stock buffer. (6) AR buffer tubes. (6) M4 charging handles. (2) buffer assemblies with tube, spring, buffer, castle nut. (2) Buffer springs. (3) AR-15 bolt carrier groups. (2) Dust covers. (5) Castle nuts. (4) AR-15 end plates, 3 with QD sling attachment. (1) Velocity 3.5 lb drop-in single stage trigger. (1) F&N Tactical muzzle brake. (1) 5 pack of .308 crush washers and other small parts

Arthur James Menchego, born in 1950, is a listed Santa Ana Pueblo artist. The painting features a Native American woman with small drawing of elk in background. Signed lower right. Measures approximately 4-1/2" across x 6-1/2" tall, matted and framed measures approximately 11" across x 13" tall.

American made pump-action shotgun chambered for 3" 12 Gauge shells, and manufactured North Haven, CT. The Model 500 started production in 1961, and is still produced today. Shotgun features a blued finish on the steel components, black anodized aluminum receiver drilled and tapped for optic mounting, an approximately 28" vent rib barrel, white bead front sight, brass mid-bead, accepts Accu-Chokes and measures 'Improved Cylinder' with a drop-in gauge, dual action bars, half-length magazine tube, smooth curved trigger, smooth left side receiver mounted bolt release behind trigger, serrated top receiver mounted sliding safety. The hardwood furniture consists of a semi-pistol gripped shoulder stock with checkering at the wrist, finger grooved checkered slide handle, 14" length-of-pull, and a brown ventilated rubber recoil pad with black spacers. The original blued finish retained is approximately 98% with light handling marks on the barrel. The anodized receiver finish remaining is about 98% with very light scratches that don't expose bare metal. Metal displays no deformation, or rust. The action is smooth and crisp, and the bore looks bright and shiny. The furniture wood is in very good condition with light edge wear on the grip, and some minor handling blemishes. Condition is NRA Very Good. ***Modern Firearm***

Features manually adjustable M1-type windage and elevation adjustment. The accuracy of the windage and elevation adjustment is set to 1/4 M.O.A. per click. Mil-Dot reticle, factory lens covers, SFP, 6061-T6 Aircraft Quality Aluminum. Scope is like new, clear optics.

Five pendants includes various turquoise matrix and two brooches with turquoise and shiny oyster.

Matte black, 1" tube, 1/4 MOA click, duplex reticle. Scope is in new condition, clear optics. Comes in factory box with matching label.

American made semi-automatic rimfire rifle chambered for .22 Long Rifle only, and manufactured in Brooklyn, NY. Henry Repeating arms was founded in 1996 in Brooklyn, NY, and moved to Bayonne, NJ in 2008, putting the manufacture of this rifle in that time frame. Rifle is a close copy of the AR-7 survival rifle designed by Eugene Stoner, and disassembles into smaller components that can be stored inside the hollow buttstock (rifle floats in water). Rifle features a matte black aluminum receiver, black polymer furniture, 16" sleeved polymer barrel, raised dovetailed blade front sight, elevation adjustable rear peep sight, serrated curved trigger, pull-out charging knob, serrated right receiver mounted manual safety, accepts detachable box magazines, knurled take-down nut, and a front trigger guard mounted serrated magazine release. The black polymer furniture consists of a smooth semi-pistol gripped shoulder stock, no forend, and a black serrated butt plate/stock cover. The original black polymer finish retained is approximately 97% with edge wear at the muzzle, and light handling blemishes along the barrel. The black aluminum receiver finish remaining is approximately 96% with some light edge wear, and some handling marks. The aluminum receiver finish retained is approximately 94% with edge wear, and contact losses. Metal displays no rust, or deformation. Bore is bright with strong rifling, and the action is smooth and crisp. The shoulder stock polymer is in very good condition with light scratches and scuffs. Rifle includes one magazines total. Condition is NRA Very Good. ***Modern Firearm***

Vintage American made side-by-side box-lock shotgun chambered for 2-3/4" 12 Gauge shells, and manufactured around 1922. Ithaca offered the Nitro Express between 1921 and 1947 as an entry-level model. It became the most common Lefever model due to it being produced through 1947. Shotgun features blued approximately 28" low ribbed barrels, brass bead front sight, the fixed chokes measure 'Full' on the left and 'Modified' on the right (measured with a drop-in gauge), smooth curved double triggers, annular cut top lever, serrated sliding manual tang safety, shell extractor, and color-case hardened receiver. The refinished black walnut furniture consists of a round-knob pistol gripped shoulder stock with checkering at the wrist, checkered splinter forend, 14-1/2" length-of-pull to the front trigger, 1-13/16" drop at comb, 2-3/4" drop at heel, and a red Red Head ventilated recoil pad with a black spacer. The receiver depicts a small waterfowl scene on both sides. The original blued finish retained is approximately 95% with edge wear at the muzzle, handling wear on the rib and a small amount along the barrel. The color-case finish retained is approximately 65% with carry wear, and the finish starting to take on a brown patina. Metal displays a very small amount of deformation in one of the screw slots, and there is a some minor spots by the chamber area that appear to be rust and light pin-prick pitting. The action functions soundly and quickly falls under its own weight, and the top lever rests to the right of the tang's centerline. The refinished furniture wood is in fair condition with cracks and repairs the the forend, and some moderate to heavy handling marks to the left side of the shoulder stock. Bores are bright and shiny, but need to be cleaned. Condition is NRA Near Good. ***Modern Firearm - C&R Eligible***

Rear Focal (SFP)Features manually adjustable M1-type windage and elevation adjustment. The accuracy of the windage and elevation adjustment is set to 1/4 M.O.A. per click. T-MOA reticle, 6061-T6 Aircraft Quality Aluminum. Team Warne one-piece scope base attached. Scope is like new. Comes in factory box with matching label, instructions and 2 1/4" sun shade .

"Model 01121," an American made semi-automatic rimfire target rifle chambered in .22 Long Rifle, manufactured circa 1996 in Southport, CT. Rifle features a gloss blued barrel finish, a matte black receiver finish, an approximately 20" cold-hammer forged bull barrel with a recessed crown, no provisions for iron sights, smooth curved trigger, accepts detachable rotary style magazine, smooth magazine release in front of magazine well, annular cut trigger guard mounted push-button safety, trigger guard mounted manual bolt hold open, receiver drilled and tapped for optic mounting, and an aluminum trigger guard. The red,white, and blue synthetic furniture consists of a smooth semi-pistol gripped shoulder stock with granulated texturing at the wrist, granulated textured forend, sling swivel on the forend and the bottom of the shoulder stock, and a weave textured rubber McMillan recoil pad with a black spacer. Furniture may be an earlier version of the McMillan A5-22 rifle stock. A Weaver 'Grand Slam Tactical' 3-10x40mm second focal plane rifle scope with a Mil-Dot reticle is mounted to the receiver using a single-piece Leupold mount with 1" rings. The receiver, trigger, and trigger guard are painted, with the barrel having a blued finish. The original blued finish retained is approximately 99% with white material transfers on top of the barrel (can be removed), and some superficial scrateches. The original painted finish retained is approximately 98% with a few small nicks, and some edge wear on the receiver. Metal displays no rust, or deformation. Bore is bright with strong rifling, and the action is smooth and crisp. Furniture is in near excellent condition with superficial scratches, and small spots of hardened residue on the left side of the shoulder stock. The scope's sight picture is clear and bright. Rifle includes one factory 10-rd magazine. Condition is NRA Very Good to Excellent. ***Modern Firearm***

Custom American made semi-automatic AR-15 style rifle chambered for .308 Winchester, and the receivers were manufactured by Mega Arms LLC. out of Tumwater, WA. Rifle features a Mega Arms MA-TEN billet receiver set with a matte black Type 2 Class III hard coat anodized finish, T-marked flat top upper receiver, approximately 18" matte stainless steel Black Hole Weaponry barrel, polygonal Caudle P3 rifling, smooth curved two-stage Geissele trigger, low profile gas block, folding fully adjustable Diamondhead back-up iron sights, chrome lined bolt carrier with staked gas key, A2 style bird cage flash suppressor, 12-1/2" JP Enterprise free-float hand guard with a sling stud and threaded mounting holes, approximately 2" picatinny rail mounted at the front of the handguard, shell deflector, dust cover, accepts detachable magazines, checkered push-button magazine release, flared magazine well, oversized trigger guard, serrated ambidextrous manual safety, Bravo Company charging handle with extended serrated latch, serrated paddle bolt release, rifle length receiver extension, standard buffer and spring (buffer weight unknown), two sling loops on the stock, Flat Dark Earth (FDE) overmolded Ergo pistol grip with slight finger grooves, and a FDE adjustable Magpul PRS stock with a serrated rubber recoil pad (adjustable cheek rest and Length-of-pull). The original matte black anodized finish retained is approximately 98% with very light blemishes, and minimal edge wear. The barrel's matte stainless finish retained is approximately 96% with several light scratches on the exposed portion of the barrel. Metal displays no rust, or deformation. The action is smooth and crisp, and the bore is bright with strong polygonal rifling. The handguard, stock, and pistol grip are in excellent condition with superficial blemishes. Rifle includes no magazine. Condition is NRA Very Good. ***Modern Firearm***

Includes: AR pistol grips, buttstocks, forward grips, backup sights, quick detach sling swivels, optics mounts, bipods, pistol and AR mags and more

Titled "Kiva Ladder" by Matthew Chalom, a Santa Clara Pueblo/Navajo photographer. The photo was taken at Pecos National Monument. The Pecos Pueblo was established circa 1450 A.D. and was called Cicuye' by the Indians. The photo is signed in lower right and dated '04. It is numbered 22 of 25 and measures 20" x 24" matted and framed, photo alone is 16" x 20".

Turkish made slide-action repeating shotgun chambered for 2-3/4" 20 Ga. shells, and manufactured in by Akkar. Imported by European American Armory out of Cocoa, FL. Shotgun features a matte black finish, an approximately 18.5" round barrel with, extended combination breaching muzzle brake with choke, raised protected red fiber-optic front sight, fully-adjustable ghost ring rear sight, factory installed picatinny optic rail, 3/4 length 5-round tube magazine, dual action bars, smooth curved trigger, annular cut trigger guard mounted cross-bolt safety, and extended slide handle release at the front of the trigger guard. The synthetic furniture consists of a semi-pistol gripped shoulder stock with checkering at the wrist, finger grooved and serrated/checkered black synthetic slide handle, sling swivel studs on the bottom of the shoulder stock and on the magazine tube cap, and a black ventilated rubber recoil pad. The original matte black finish retained is approximately 96% with very light scattered scratches, very few heavier scratches, and some edge wear. Metal displays no deformation, but corrosion was observed on the rear sling swivel. The action is smooth and crisp, and the bore is bright and shiny. Furniture polymer is in excellent condition with superficial blemishes. Condition is like NRA Good. ***Modern Firearm***

Features a multicoat and tactile power selector, 1" main tube, SFP, matte black finish, Butler creek lens covers, duplex reticle, 1/2 MOA Finger Click Adjustments. Scope is like new, clear optics.

One cuff has wider bear-paw motif. The other is a three stone turquoise cuff.

American classic side-by-side box-lock shotgun chambered for 2-3/4" 12 Gauge shells. Specifically, this is a Lewis Grade 1 example of the Ithaca Hammerless shotgun with an added bolt through the rib extension. Lewis model serial number range was 55,000 to 123,600, and were produced from 1901 until 1906. Shotgun features a blued and color-case hardened finish, approximately 30" matted ribbed 'KRUPP FLUID STEEL' barrels, bores measure 'Full' with a drop-in gauge, brass bead front sight, hammerless, dual smooth curved triggers, checkered sliding tang safety, checkered top lever, and an extractor. The receiver is engraved with the letter 'S' and the number '12' on the water table. both sides of the receiver surfaces displays a banner inscribed 'ITHACA HAMMERLESS' with tightly surrounding floral scrolls, and limited geometric edge patterns. The walnut furniture consists of a semi-pistol grip shoulder stock with checkering at the wrist, a checkered black plastic grip cap, 14-1/2" length-of-pull to the front trigger, 2-1/8" drop at comb, 3" drop at heel, a checkered splinter-style forend, and red Pachmayr ventilated rubber recoil pad with white and black spacers. The water table, barrels, and forend all have matching serial numbers '78033.' The original blued finish retained is approximately 75% with handling blemishes, some edge wear, and general thinning to where the finish is taking on a dark gray patina. The color-case finish has faded a bit, but still shows some brilliant coloring. Metal displays some light oxidative speckling on the bottom of the barrel (under handguard), a small dent on the right barrel, and some slight deformation in a couple of the screw slots. Bore shows some light speckling in the bores, but are still pretty bright and shiny. Hardwood furniture is in fair condition with scattered handling blemishes, and a crack behind the left side of the receiver. The action is smooth with the action opening quickly under its own weight, and the action lever rests slightly to the left of the tang's centerline. The action has a crisp lock-up. Condition is NRA Fair to Good. ***Modern Firearm - C&R Eligible***

American made blowback operated semi-automatic take-down pistol caliber carbine chambered in 9x19mm, and manufactured circa 2019 in Newport, NH. The product SKU for this carbine is '19115'. Carbine features a black type III hard coat anodized finish, 'Dead-Blow' action with a tungsten bolt, fluted heavy profile 16.12” cold hammer-forged chrome-moly steel barrel, 1/2”-28 threaded muzzle, take-down latch on the bottom of the handguard, knurled barrel take-down nut, knurled thread protector, protected blade front sight, sliding adjustable ghost ring rear aperture sight, M-LOK aluminum handguard, aluminum receiver with integrated picatinny optic rail, chrome-moly steel bolt with reversible charging handle, reversible serrated push-button magazine release, interchangeable Glock pattern magazine well, flared magazine well, annular cut trigger guard mounted cross-bolt safety, and a serrated curved trigger. The polymer furniture consists of a glass-filled nylon synthetic semi-pistol gripped shoulder stock with granular texturing at the wrist, sling mount on the bottom of the shoulder stock, and serrated black rubber recoil pad. The original matte black finish retained is approximately 95% with a few light scratches that do not expose bare metal, edge wear at the front of the handguard, and a dried residue on the stock. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. The polymer shoulder stock is in very good to excellent condition with very minor handling marks. No magazines included. Condition is NRA Very Good. ***Modern Firearm***

'Model 01115,' an American made semi-automatic rimfire 'target' rifle chambered in .22 Long Rifle, manufactured circa 1991. Rifle features a matte stainless steel barrel and matte aluminum receiver, receiver drilled and tapped for optic mounting, optic dovetail attached to receiver, cold-hammer forged 20" fluted barrel with recessed crown, no provisions for iron sights, smooth curved trigger, accepts detachable rotary style magazines, annular cut push-button manual safety mounted on trigger guard, manual bolt hold open, smooth charging handle, and an aluminum trigger guard. Furniture consists of a smooth black laminate thumbhole stock, smooth wide contoured forend, high right-hand cheek weld, and black serrated Pachmayr rubber recoil pad with a black spacer. A Tasco 6-24x40mm scope with a duplex reticle is mounted using two-piece 1" rings. The receiver, trigger, and trigger housing are in-the-white, while the stainless steel barrel has a matted finish. The metal finish is approximately 98% with only a few small handling blemishes, and a few spots of staining on the barrel. Metal displays no rust, or deformation. Bore is bright with strong rifling, and the action is smooth and crisp. Furniture wood is in excellent condition with only superficial marks. The scope's sight picture is clear and bright. Magazines not included. Condition is NRA Near Excellent. ***Modern Firearm***

Includes: 1) Vintage Redfield 4x-12x "Golden Five Star" rifle scope, Redfield Accu-Trac Accu-Range reticle, wide-field, 350-600 yard ranging system. This Redfield innovation was based on estimating range by the average depth of a deer's body. It turned 200-yard deer hunters into 400-600-yard deer hunters. Overall very good with some scratches/scuffs. 2) Vintage Leupold Westerner 8X scope. A classic fixed-power, long-range varmint scope produced between 1957 and 1960. Measuring 14 inches long and featuring a 1-inch tube, it is highly valued by vintage collectors and often paired with historic rifles like the .222 Remington. Fine crosshair reticle. Overall good with handling wear, clear optics.

American made direct impingement semi-automatic centerfire modern sporting rifle chambered for 5.56x45mm NATO, and manufactured in West Columbia, SC. Rifle features a matte black anodized finish (MIL-A-8625F, Type III, Class 2), flat top picatinny upper receiver, a 16" medium contoured barrel, 1/2"-28 muzzle threads with a A2 style flash suppressor, 13-1/2" M-Lok free float handguard with small segments of picatinny rail on the top, four quick disconnect (QD) sockets on the handguard, Magpul angled foregrip, Magpul MBUS folding adjustable back-up iron sights, shell deflector, annular cut bolt assist, annular cut push-button magazine release, ambidextrous serrated bolt release, flared magazine well, serrated receiver mounted manual safety, smooth curved single-stage trigger, oversized Magpul trigger guard, spring loaded dust cover, Mil-Spec charging handle, olive drab green pebble textured Hogue pistol grip, M16 style bolt carrier with side venting ports, staked gas key, Mil-Spec buffer and spring, end plate with dual sling loops, six position Mil-Spec receiver extension, and a Magpul MOE stock with a black rubber recoil pad. The matte black finish retained is approximately 99% with only superficial blemishes. Metal displays no rust, but there is the slightest deformation on the stock extensions castle nut. Action is smooth and crisp, and the bore is bright with strong rifling. Furniture polymer is in excellent condition. The previous owner sprayed what appears to be a white dry lubricant on the inside of the firearm, it is flaky and needs to be cleaned out. The receiver extension keeps the buffer detent from moving freely, and the castle nut needs to be staked. Rifle does not include magazines. Condition is NRA Excellent. ***Modern Firearm***

Vortex Optics Crossfire II 3-12X56 AO "Hog Hunter" Riflescope, V-Brite (MOA) Reticle , sun shade, 1/4 MOA Adjustment, Max Elevation & Windage Adjustment-60 MOA. Very Good, needs battery.

Yugoslavian made semi-automatic short-stroke SKS patterned rifle chambered in 7.62x39mm, manufactured circa 1967-1989. Imported by Century Arms International of Georgia, VT with import marks on the right side of the barrel. Rifle features a blued finish, 20.5" barrel with grenade launcher attachment, hooded post front sight, flip-up front night sight with a yellow dot, tangent rear sight graduated to 1,000 meters with a folding two-dot night sight, folding grenade launcher sight, under-folding blade style bayonet, smooth curved trigger, serrated manual safety lever mounted on trigger guard, fixed 10 round magazine, stripper clip guide cut into the bolt carrier, and a knurled bolt handle. The hardwood furniture consists of a smooth semi-pistol grip shoulder stock, smooth finger grooved forend, smooth vented handguard, sling loop on the gas block and the bottom of the shoulder stock, and solid black rubber recoil pad with a trapdoor for cleaning kit storage. Serial numbers '582156' match on the receiver, bolt carrier, top cover, magazine, trigger guard, and stock. The original blued finish retained is approximately 84% with general thinning around the receiver area (including top cover and magazine), handling blemishes, and contact wear. Metal displays no deformation, but there is sparse oxidative speckling on the rifles entirety. Action is smooth and crisp, and the bore appears bright with strong rifling. The bore is dirty with several patches passed through the bore that turned black. The furniture wood condition is in good condition with minor handling marks, but there is slight splitting around a screw head on the right side of the forend. An exact manufacture date cannot be determined. Condition is NRA Good. ***Modern Firearm***

"By Known Artist Mark Silversmith", signed lower left corner. Titled "Her First Pot" in pencil on back of canvas, with a drawing of an older Indian girl in pencil and an inscription stating "To Meriam" (possibly) and a last name and the artist's signature. Measures 33 3/4" tall by 14 3/4" wide. Canvas stretched on frame.

American made direct impingement semi-automatic centerfire modern sporting rifle chambered for 5.56x45mm NATO, and manufactured in Apopka, FL. Rifle features a rattle canned camouflage finish, flat top picatinny upper receiver, a 16" medium contoured barrel, 1/2"-28 muzzle threads with a muzzle brake, 12-1/2" Key-Mod free float handguard with small segments of picatinny rail on the top, five quick disconnect (QD) sockets on the handguard, 1-1/2" picatinny rail mounted on the left side of the handguard, sling stud on the bottom of the handguard, five handguard rail covers, Yankee Hill Machine folding adjustable back-up iron sights, shell deflector, annular cut bolt assist, annular cut push-button magazine release, serrated paddle bolt release, flared magazine well, serrated receiver mounted manual safety, spring loaded dust cover, serrated curved single-stage trigger with anti-walk axis pins, oversized trigger guard, Battle Tested Equipment (BTE) charging handle with an extended latch, Bravo Company (BCM) forward pistol grip with a storage compartment, serrated and pebble textured BCM pistol grip with a storage compartment, Spike's Tactical M16 style nickel boron bolt carrier with side venting ports, staked gas key, Mil-Spec buffer and spring, end plate with dual QD sockets, six position BTE Mil-Spec receiver extension with number markings on top, and a Troy Battle Ax CQB lightweight stock with a storage compartment and two QD sockets. The camouflage finish retained is approximately 75% with a lot of flaking and taking on a battle worn finish. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. Furniture polymer is in very good condition with no scrapes or damage (the painted finish makes it hard to judge). Rifle includes one magazine total. Condition is NRA Good - With Rattle Can Finish ***Modern Firearm***

One large center turquoise cabochan with matrix coloration. One is a row of small turquoise and two green cabochans with beaded accents along one side.

American made bolt-action centerfire hunting rifle chambered for .308 Winchester, and manufactured in Westfield, MA. The Model 111 was introduced in 2003. Rifle features a blued finish, receiver drilled/tapped for optics, 22" tapered barrel, no provisions for sights, smooth curved trigger, serrated sliding 3-position tang safety, smooth right receiver mounted bolt release, polymer trigger guard, slightly swept back bolt handle with a checkered knob, blind internal 4-round magazine, and two-piece scope bases attached to the receiver. The black synthetic furniture consists of a semi-pistol grip shoulder stock with checkering at the wrist, checkered forend with a sling stud, sling stud on the bottom of the shoulder stock, checkered black plastic grip cap with a Savage medallion, and a smooth solid black rubber recoil pad. The original blued finish retained is approximately 99% with little to speak of. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. Like New. Condition is NRA Excellent. ***Modern Firearm***

American made semi-automatic centerfire rifle chambered for .223 Remington (fires 5.56x45mm per owner's manual), and was manufactured circa 1981 in Southport, CT. Rifle features a blued finish, integral proprietary optic on the receiver, 18" pencil barrel, slotted 4-1/2" flash suppressor (entire device length), large blade front sight, fully adjustable rear peep sight, manual blade safety inside trigger guard, stamped trigger guard/take-down lever, smooth curved two-stage trigger, magazine release paddle inside magazine well, manual bolt hold-open button on top of the left receiver rail, and a smooth operating rod handle. The hardwood furniture consists of a smooth semi-pistol gripped shoulder stock, smooth forend, slotted black plastic handguard, sling swivel on the bottom of the shoulder stock, sling swivel on the gas block, and a smooth black plastic butt plate. The original blued finish retained is approximately 97% with minor handling blemishes. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. Furniture wood is in very good to excellent condition with a few minor blemishes, and a couple of spots of white material transfers on the top of the shoulder stock. Rifle includes one magazine total. Condition is NRA Very Good. ***Modern Firearm***

Framed appears to be cut down. 24"W x 19-1/2"H.

Stocky's Long Range Composite Stock , Accublock Remington 700 long Action. Flat black, aluminum bedding, three sling studs, factory solid rubber recoil pad. Excellent condition.

of large size, brass bound veneered wood, probably mahogany. 19 1/2" x 10" by 7 1/2" deep. Exterior shows loss of brass at corners and other imperfections. Fair condition overall. Comes with miscellaneous firearm maintenance and reloading supplies.

Limited edition, numbered 26/47, signed by Native American Crow artist Penni Anne Cross in lower left corner. Titled Teesa Waits to Dance, depicting Native American child dancer sitting on floor. Cross was born in 1939 in Washington state.

Elaborate embossed floral and Rococo revival-style metal casing. Typical marble shelf missing (replaced with MDF board). Buyer responsible for shipping costs.

Brown leather tooled saddle with square skirt, with floral motif in rustic condition with 15" seat. Missing most of wool. Includes scabbard with Red Ryder BB gun.

Mossberg 9200 semi-auto 12 gauge shotgun, 28" vent rib barrel, steel sighting bead, brass mid bead, 3" chamber, Accu-Choke. blued barrel, matte black receiver with scroll/floral engraving, gold toned trigger, sliding tang safety, checkered wood forearm and semi-pistol grip shoulder stock with checkered grip and vented rubber recoil pad. Bore is excellent/bright, overall excellent condition, wood has a couple of very minor dings, finish is excellent, action is smooth. "IC" choke installed. LOP is 14". Produced 1992-2001. NRA Condition-Excellent. Modern Firearm.

American made semi-auto rifle chambered for .223 Rem ammunition circa 1983. It features an 18.5" polished stainless steel barrel and more of a matte stainless receiver. It has a hooded white bead/blade front sight with rear sight removed and S&K scope base installed, modified to form a ejection port. Black polymer stock with sling studs attached, a vented red rubber "White-Line" recoil pad installed and a ported black polymer hand guard and a key-chain style ring in a sling stud has been installed on the left stock above the trigger. Metal finish looks very good. The wood stock is good with minor scratches/scuffs. Bore is excellent, bright. No magazine. NRA Condition-Near Very Good. Modern Firearm.

One is maker marked and stamped 1885. Both are in rustic condition and show age.

Leupold VX-3 Long Range Target Rifle Scope 30mm Tube 8.5-25x 50mm Side Focus, 1/4 MOA, SFP, 50mm objective lens, target Dot reticle. Butler Creek front lens cover. Scope is like new, clear optics.

Framed with barbed wire dating from 1875 - 1881 with picture of Joseph Glidden barbed wire inventor from the era. Measures 24"W x 21-1/2"H.

(1) 1896-P and (1) 1898-S and (1) 1900-O

German made single-action centerfire revolver chambered for .38 Special, manufactured circa 1976. Imported by Röhm Gesellschaft (RG) Industries out of Miami, FL. Revolver features a blued and matte black finish, an approximately 4-3/4" round barrel, fixed blade front sight, notched frame rear sight, fluted six-round cylinder, collard cylinder pin head, bird's head style ejector rod button, serrated hammer spur, internal firing pin, smooth curved trigger, smooth grip straps, transfer bar safety, aluminum trigger guard, aluminum frame and grip straps, and two-piece checkered plastic faux wood grips with thumb rest. The original blued finish retained is approximately 60% with edge wear, scratches, general thinning, and a drag line on the cylinder. Metal displays a fair amount of scattered rust, but no deformation. Bore is bright with strong rifling, and the cylinder chambers are also very good. The bore and cylinder need to be cleaned. The action is sticky, but still locks up. The faux wood grips are also very good with some light scratches, and a few small chips. NRA Condition is Fair. ***Modern Firearm - C&R Eligible***

Lot of 14 Mason Bolo Ties

Shooters Ridge Ruger 10/22 .22lr .920 Thumbhole Stock. black polymer, sling studs, checked rubber grip inserts in forearm, factory recoil Pad 7 grip cap. Very Good condition.

1) Hide braided all in used condition

In plastic sleeve.

Vintage Bolt-Action Single-Shot rimfire rifle chambered for .22 Short, Long and Long Rifle cartridges, manufactured1948-1970. Blued steel finish. One piece walnut stock. Chrome bolt, & trigger. 19 1/2" round barrel with dovetailed blade/bead front sight, adjustable rear sporting sight, metal trigger guard, smooth trigger and a thumb safety on the rear of the bolt. Metal finish is 95% with a couple of minor scratches, wood is sound with whitish stains on the buttstock , factory black plastic butt plate, bore is excellent/bright. Great starter rifle. NRA Condition-Good. C&R Firearm.

Vintage semi-automatic sporting rifle chambered in .22 S/L/LR (.22 Long Rifle only as automatic). It has a 24" blued barrel and receiver with a dovetailed blade front sight, adjustable rear sight, 3/4 length magazine tube, serrated trigger and a large cylindrical charging handle that pushes inward to lock the bolt open or closed with a thumb safety on the top right. It sits in a one piece, straight grain wood stock with a black plastic butt plate. Blue metal finish is about 30%, the rest turned a gray/brown patina with very light scattered surface rust. The plain wood stock looks good/sound. Bore looks very good, bright. Condition is NRA Good. C&R Firearm.

Includes a ring bit, a snaffle bit, a vintage bronze bit, (2) Hay hooks, a bug boot jack, railroad spike, meat hook and a horse brush.

Three framed shadow boxes with knives mounted inside for display. Shark knife with etched shark on blade with faux mother of pearl handle 9"overall with 4"blade,Bowie knife with Boar etched blade with wood handle and boar metal motif measures 11.5" and 6" blade marked Soligen Germany, Fox Pocket Knife with etched fox motif on blade with brass handle marked Soligen Germany 7" overall with 4" blade, Turkey Pocket watch with turkey etched blade wood handled marked Soligen Germany 7" overall with 3" blade, Large Bowie Knife with mountain lion motif blade stacked red handle with mountain lion cap measures 14" overall with 8" blade, Marlin themed fisherman's knife faux bone handle measures 9" overall with a 5" blade, Pheasant pocket knife with etched blade stainless handle with brass insert with flying birds measures 7.5"overall with 3" blade, Trout themed pocket knife with etched blade and antler handle measures 7" overall with a 3 " blade, Moose Themed Knife with wood handle and etched blade 10.5" overall with 6" blade, Bass themed pocket knife with etched blade and handle has a fishing scene measures 8" with a 4" blade, Canadian Goose themed pocket knife with gold washed etched blade with geese and wood handle 8" overall 4" blade, Moose themed knife with etched blade and wood handle with grooved finger grips measures 9" overall with a 4" blade, Duck themed pocket knife with etched blade and wood handle 8"overall with 4 " blade, Bird themed pocket knife with pewter handle etched blade 7" overall with 3 " blade,Deer themed pocket knife with etched blade and metal 3D buck themed measures 9"overall with 3" blade, Ram themed Bowie with damascus blade and etched ram themed handle 10"overall with 6" blade, Salmon pocket knife with gold washed etched blade with wood handle 7.5" with 3 " blade, Bear Themed Knife with etched blade and wood handle 10"overall.

for 20 bore gun #17772 with 28" BBLs. Good condition with minor imperfections, wear, carry and normal use. good labels. large Purdey oiler included and marked on top. Lips is embossed in leather reads "D.J. Molteno"

"Aro-Tek Custom" Austrian semiautomatic pistol, imported by Glock Inc, Smyrna GA. Ported barrel rib fits slot cut in top of slide. Features approx 4.4" barrel, fixed front & dovetailed rear 3 dot night sights, striker fired, manual safety in trigger, extended slide stop, rubber slip-on grip sleeve, laser in front of triggerguard (battery compartment in butt). All black finish. Night sights have barely any remaining glow. Bore is excellent condition. Overall external condition is like new, with some evidence of handling and use. Laser not tested, batteries need replaced. Includes original factory 'Tupperware' case & black kydex belt holster. Condition is NRA Excellent *** Modern Firearm ***

for serial #14691 breech loading gun. Leather over oak with brass hardware. Great labels and near fine condition lining. BBLs of original gun 31-31 1/2 inches and about 15 1/2" from back of hammer to end of butt. case is 3" deep, exterior leather is good with normal wear and imperfections.

Winchester Limited Edition series, size 7 3/8. One like new in a box and one gently used.

Unsigned, measures 15"H x 13-1/2W, 5"deep.

Bell and Carlson Medalist Light Tactical Stock for Howa 1500, Weatherby Vanguard Short Action Varmint Barrel Channel, designed to fit Short Action Howa 1500 and Weatherby Vanguard rifles with a Heavy/Varmint Barrel Contour. Dual Front Sling Studs for simultaneous use of a sling and a bipod. Solid rubber recoil pad, OD green with black "spider webbing". Very good condition.

Leupold Competition Fixed-Power Rifle Scope 30mm Tube 40x 45mm Matte, 1/8 MOA windage & elevation adjustments, Target Dot reticle, screw-in aluminum factory lens cap, rear cap missing. Scope is like new, clear optics.

Includes a pair of brown leather chaps unmarked, leather double looped revolver holster and a pair of brown leather spotted cowboy cuffs.

American made gas delayed blowback operated semi-automatic sporting rifle chambered in .17 Hornady Magnum Rimfire. Features a high luster black finish, 22" medium taper button rifled barrel with 1:9 twist & without provisions for sights, installed one-piece scope base, hard chrome bolt with oversized charging handle, bolt catch lever, push button safety, detachable 10 round rotary magazine, adjustable AccuTrigger, steel receiver with polymer rear dust cover and Boyd's Classic, left-handed laminated stock with beveled forearm, right side cheek rest, sling studs and solid rubber recoil pad. Includes one magazine. Rifle exhibits approximately 98% of it's high luster black finish showing light handling marks/wear. Action is smooth, the bore is excellent/bright and the stock is fine. Condition is NRA Excellent. Modern Firearm.

Savage/Stevens Model 95 side-button top break 12 gauge single-shot shotgun. 30" barrel, steel bead, 3" chamber, blued barrel, black alloy receiver, ribbed forearm, smooth semi-pistol grip stock with black plastic buttplate. The bore is very good/bright, receiver has scratches, barrel blue is worn from handling with scattered spots of rust, wood is overall good sound with some scratches/finish loss. Manufactured 1969. NRA Condition-Fair to Good. C&R Firearm.

Semi-automatic. 18.5" barrel, with rear flip notch, and front blade sights. Black painted receiver. Fair condition black plastic Ram-Line folding stock, with repaired crack forward of pistol grip. Also, an unmarked 4x15 scope has been mounted on the receiver. Clear optics. Bore appears very good, Action is crisp/tight. Folding stock is a little loose. Metal finish has minor edge wear, scratches. Comes with a black nylon sling, and a clear plastic Butler Creek 25/22 magazine. NRA Condition-Good. Modern Firearm.

50th Anniversary, "A Tradition of Precision Since 1947". Overall display. Measures: 19" x 25"

Includes 12 Ranger, Marshall, and Sheriff badges (Sonoma County, Wichita, El Paso, Montana, Colorado, etc.). 20" x 16"

Brazilian double/single action revolver imported by Taurus International, Miami FL. Features stainless steel construction, checkered wood grips with Taurus medallions, 6" barrel with full length underlug, adjustable rear sights, serrated blade with orange insert, 6 shot cylinder. Earlier model does not have the internal locking system, serrated trigger. Bore and charge holes are excellent condition. Metal surfaces are very good with many small scratches. Grips are excellent. Action is crisp. Comes with a nice Bianchi brown leather belt holster. NRA Condition-Very Good. Modern Firearm.

American made hammerless pump-action take-down shotgun chambered for 2-3/4" 12 Gauge shotshells, and manufactured in Chicopee Falls, MA. The Riverside Arms Company Model 520 was produced by J. Stevens. Designed by John M. Browning, the Model 520 was in production from 1909 until 1939. Shotgun features a blued finish, a 30" round barrel, brass bead front sight, the fixed choke measures 'Improved Modified' with a drop-in gauge (barrel marked 'Full'), smooth curved trigger, serrated bolt release on the left side of the trigger guard, half-length tubular magazine under barrel, single action bar, and a spur-like safety inside the trigger guard. The walnut furniture consists of a semi-pistol gripped shoulder stock with checkering at the wrist, checkered pump handle, 13-3/4" length-of-pull, and a serrated black plastic butt plate. The original blued finish retained is approximately 60% with muzzle and edge wear, general thinning, and handling wear. The finish is taking on a dark gray patina. Metal displays slight deformation on the front edge of the receiver and in one of the screw slots. Very sparse oxidative speckling was observed. The bore is smooth and shiny, but a little dirty. The furniture wood is in good condition with thinning finish, and normal handling blemishes. The action functions well, but feels dry and dirty. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

Vintage recoil operated semi-automatic shotgun chambered for 2 3/4" 12 gauge shells. Manufactured in Ilion, NY circa 1905 (first year production). Features a blued refinish, cut-down 21.5” barrel with affixed Lyman Cutts compensator & .755 choke, Bradley style front sight mounted on the comp w/ damaged red bead, 4 round tube magazine, ‘suicide’ sliding safety inside the triggerguard, smooth curved trigger, checkered charging handle, steel ‘humpback’ receiver, point checkered walnut forend, and round knob pistol grip shoulder stock with leather butt cover. Shotgun retains approximately 90% of its blued refinish showing scattered wear/scratches. The action is mechanically sound, the bore is bright but dirty, and the wood stocks are very good with semi-worn checkering. Condition is NRA Good. ***Modern Firearm / C&R Eligible***

A) Look through drinking flask of small pocket size. Lizard skin or snake over glass. Silver hallmarked top (not sterling marked) JD&S with hunting horn, possibly Dixon of Sheffield. B) Large Art Nouveau hand mirror with repose figure of Lady with flowers, marked Empire Art Silver (not sterling marked). C) Two souvenier spoons. 1 is marked sterling Scroon Lake Adirondack with crossed rifles. 1 is marked Forest and Stream with game scene and pistol gripped Deluxe Winchester 86 rifle (not sterling)

Two silver cuff bracelets with turquoise stones. One cuff includes a turquoise stone set in a bezel with leaf accents on the side. The other cuff includes a turquoise cabochon with natural looking matrix.

Measures 7-1/2" and the other measures 8-1/2"

Exposed hammer double bbl shotgun with dealer or agent's name silver inlaid on rib, "W Eberhardt Sacramento." under lever action, carved horn finger grip, lightly engraved side lock actions about 1870's-80s. 28-3/4" bbls, 45" overall. Sling swivels removed from bbl and stock long ago. Good damascus pattern on bbls. Bores are fair to good with some pitting, but may clean and locks up tight. The hammers do not hold when cocked and need repair. Stock is good. Larry Shelton author and collector's estate. Condition is NRA Fair. Antique Firearm

Early side-by-side double barrel exposed hammer shotgun chambered for 2 3/4" 12 gauge shells. Manufactured in Fulton, NY by Hunter Arms Co. circa 1905. Features 30" damascus steel barrels with raised & matted concave rib, extractor, brass bead front sight, exposed hammers with checkered spurs, double triggers, case hardened receiver, point checkered walnut splinter forend, and semi-pistol grip shoulder stock with serrated black synthetic buttplate & 14 7/16” LOP. Shotgun retains less than 10% of its original finish with the majority of the metal surfaces appearing cleaned with some scattered iridescent tones. The action is mechanically sound, the bores have scattered light pitting, and the wood stocks good with imperfections. Condition is NRA Fair to Good. ***Modern Firearm / C&R Firearm***

Russian military bolt action rifle manufactured circa 1933. Battlefield Pick-Up condition, consists of the barreled action & stock, rear sight & cleaning rod present, no bolt. The stock has no metal fittings except the barrel band springs, Bore is dark/rough, barrel, trigger & receiver have scattered spots of surface rust, the stock has been a light blue at some point with traces in the grain and protected areas. Poor Condition. C&R Firearm.

Semi-automatic. Blowback-operated pistol that takes 10/22 magazines. Ambidextrous safety, and charging handles. Single piece frame is molded ABS plastic. Stamped steel receiver cover with open iron sights. Missing the front sight post. Storage compartment in grip. 4" barrel. Matte black finish. Bore appears excellent/bright. Threaded muzzle. Metal finish has some minor scratches/rubs. Action is crisp/tight. Comes with a clear plastic Eagle2230 30-rd double stack magazine. NRA Condition-Very Good. Modern Firearm.

Brazilian made semi-automatic striker fired pistol chambered for 9x19mm Luger. Pistol features a gas nitride slide finish, an approximately 3.7" stainless steel barrel with a matte black DLC (Diamond-Like Carbon) finish, front and rear slide serrations, fixed blade front sight with a white dot, dovetailed serrated square notched rear sight, full-length metal guide rod with dual recoil springs, flat faced trigger with a serrated passive blade safety, loaded chamber view port, serrated slide stop, serrated push-button magazine release, stainless steel insert (serialized part), black polymer frame with a single finger groove on the front strap, picatinny accessory rail on the dust cover, granular textured grip, and beveled magazine well. The original matte black finish retained is approximately 99% with nothing remarkable. Metal displays no rust, or deformation. The action is smooth and crisp, and the bore is bright with strong rifling. Frame polymer is in excellent condition with little to speak of. Pistol includes the original black plastic factory foam lined box, two extra grip straps, Taurus GX4 key chain, cable lock, and two 15-round magazines total. Condition is NRA Excellent. ***Modern Firearm***

Austrian made semi-automatic striker fired pistol chambered for 9x19mm Luger, imported by Glock Inc. out of Smyrna, GA. This is a hybrid model with the slide length of the model G19, and grip length of the model G17. Pistol features flat dark earth (FDE) nPVD (Physical Vapor Deposition) finish, an approximately 4.02" Marksman barrel with a recessed crown, tritium front sight with white outline, dovetailed tritium square notched rear sight with white outlines, bull-nosed slide, smooth curved safe-action trigger with a passive blade safety, accessory rail on dust cover, reversible serrated push-button magazine release, serrated slide stop, slightly beveled magazine well, FDE polymer frame with square checkering on the grips, under cut trigger guard, lanyard loop on the heel, and serrated front trigger guard. The original FDE nPVD coating retained is approximately 99% with nothing remarkable. Metal displays no rust, or deformation. Bore is bright with strong rifling, and the action is smooth and crisp. The frame polymer is in excellent condition with little to speak of. Night sights glow. Pistol includes original FDE factory hard case, three 17-round magazines total, magazine speed loader, cleaning rod with brush, two extra different shaped backstrap covers, instruction manual, and cable lock. Condition is NRA Excellent. ***Modern Firearm***

This lot consists of an olive drab green Nomex flight suit, and a pair of H.H. Brown Shoe Co. Inc. military style Boondocker boots. The flight suit does not state a size, but it was said to be customized (maybe a large), and there is a leather accessory strap on the rear right side. It appears that the legs were extended in length, with a 36" inseam. There are four pockets on the legs, two on the chest, and one on the left sleeve with a pen pocket. Sections of Velcro are on the left sleeve, both shoulders, and on the left chest. A Cessna patch is sewn onto the right chest, and a Heli/Services, Inc. patch is sewn onto the right shoulder. These flight suits are typically intended to be fire resistant. The flight suit has faded a little, and the leather strap's stitches are starting to pull. The rest of this lot includes a black pair of size 8-1/2 H.H. Brown Shoe Co. Inc. These boots have 10 shoe lace eyelets, and steel toes. The boots show some small scuffs, and the bottoms have about 95% of their tread remaining.

American made direct impingement semi-automatic centerfire modern sporting rifle chambered for 5.56x45mm NATO, and manufactured in St. Cloud, MN. Rifle features a matte black anodized finish, flat top picatinny upper receiver, a 16" medium contoured barrel, 1/2"-28 muzzle threads, Yankee Hill Phantom flash suppressor with their "fast-attach" sound suppressor systems, Flat Dark Earth (FDE) Magpul MOE handguard, elevation adjustable post front sight, A-frame front sight base and gas block, bayonet lug, FDE Magpul MBUS adjustable rear sight, shell deflector, annular cut bolt assist, annular cut push-button magazine release, ambidextrous serrated bolt release, flared magazine well, serrated receiver mounted manual safety, smooth curved single-stage trigger (nickel teflon or boron), oversized trigger guard, spring loaded dust cover, Mil-Spec charging handle with an extended latch, FDE granular textured Ergo pistol grip with low finger grooves, Ares Armor nitride M16 style bolt carrier with side venting ports, staked gas key, Mil-Spec buffer and spring, end plate with sling loop, six position commercial receiver extension, and a FDE Magpul CTR stock with a black rubber recoil pad and black spacer. The matte black finish retained is approximately 95% with minor handling blemishes, and edge wear. Metal displays a very small amount of oxidation on the front sight base, but there is slight deformation on the stock extension's castle nut. Action is smooth and crisp, and the bore is bright with strong rifling. Bore was very dirty with black cleaning patches coming out. Furniture polymer is in excellent condition with superficial marks, and dirt on the pistol grip. Rifle does not include magazines. Condition is NRA Good. ***Modern Firearm***

Last pat. date Jan 5, 1886. 3." octagon BBL. Patina finish with hard rubber grips. Fair condition and not operating. Antique Firearm

Antique side-by-side double barrel exposed hammer shotgun chambered for 2 3/4" 11 gauge shells. Manufactured in Birmingham, England by J. Manton & Co. circa 1870’s. Features light coverage scroll engraving, 32" laminated steel barrels with raised concave rib, extractor, short brass post front sight, exposed hammers with checkered spurs, checkered side-lever, double triggers, back action locks, point checkered walnut splinter forend with crosspin fastener, and semi-pistol grip shoulder stock with custom brass brace around the wrist, smooth steel buttplate, & 14 5/8” LOP. Shotgun exhibits a mottled aged brown/grey patina. The left hammer functions well while the left hammer does not cock properly, the bores have scattered pitting, and the wood stocks good with imperfections & large repair to the wrist. Condition is NRA Fair to Good. ***Antique Firearm***

Large turquoise stone natural matrix and color variation. Hand-worked bezel with decorative stamping.

For show use. Wood and brass with Clasp and lock with keys. Glass top. 24"W x 14"H x 4-1/2"D. Good condition.( Buyer to Arrage shipping)

Size is 13-1/2L

Model DM-101. Double action over-under, break-top derringer, blued finish, black alloy frame, fixed sights, 3.5" barrels, faux mother of pearl grips, open-faced triggerguard, tight lock-up. Bores are excellent, grips are excellent and the blue is very good with some edge/holster wear. manufactured from 1962 to 1975. No letter prefix on SN. NRA Condition-Near Excellent. C&R Firearm.

With arrow pattern in red, black, grey and white. Measures 53" x 38". In good to very good condition.

Brazilian made single-action striker-fired semi-automatic centerfire compact pistol chambered for 9x19mm. This is a single-action pistol with restrike capabilities. Pistol features a matte stainless steel slide, an approximately 3.26" stainless steel barrel, front and rear cocking serrations, serrated slide stop, a fixed blade front sight with a white dot, dovetailed serrated square notched rear sight, partially serrated curved trigger with an integral blade safety, full-length metal guide rod assembly with dual recoil springs, serrated frame mounted manual safety, serrated push-button magazine release, integral picatinny accessory rail on dust cover, and a stippled black polymer frame with Taurus logos. The original matte stainless finish retained is approximately 99% with nothing remarkable. Metal displays no rust, or deformation. The action is smooth and crisp, and the black polymer frame is in excellent condition with little to speak of. The bore is bright with strong rifling. The G3c includes the original factory cardboard box with end label, three 10-round magazines total, cable lock, and some paperwork. Condition is NRA Excellent. ***Modern Firearm***

Turkish made semi-automatic striker fired sub-compact pistol chambered for 9x19mm Luger, and imported by Century Arms Inc. out of Georgia, VT. Pistol features a black nitride finish, a 3.19" barrel, optic cut slide with front and rear serrations, dovetailed blade front sight, serrated dovetailed square notched rear sight, serrated curved trigger with a passive blade safety, full length metal guide rod with dual recoil springs, serrated reversible push-button magazine release, serrated ambidextrous slide stop, cocking indicator on slide plate, loaded chamber indicator on the top of the slide, black polymer frame with granular texturing on its entire grip, interchangeable backstraps, undercut trigger guard, beveled magazine well, picatinny accessory rail on dust cover, and serrated front trigger guard. The original black Nitride finish retained is approximately 99% with little to speak of. Metal displays no rust, or deformation. The action is smooth and crisp, and the bore is bright with strong rifling. The black polymer frame is in excellent condition with little to speak of. Pistol includes the original black factory hard case with end label, cleaning rod and brush, small pistol tool holder and tool, handled punch, black Kydex holster, magazine speed loader, two extra backstraps, trigger lock, paperwork, and two 17-round magazines total. Condition is NRA Excellent - Like New. ***Modern Firearm***

SN: D55710. Reproduction of the blackpowder Remington 1858 New Model Army single action percussion revolver, manufactured in Italy by Armi San Marco circa 1993. Features a blued finish, stainless steel frame & triggerguard, case colored hammer & trigger, 8" octagonal barrel, pinched post front sight, 'v' notched rear sight, smooth wide trigger, serrated hammer spur, non-fluted six-shot cylinder, loading lever and two-piece laminated smooth grips. Revolver retains approximately 96% of its original blued finish showing minor scratches, action is smooth, the bore is excellent/bright and the wood grip is fine . Condition is NRA Excellent. Antique Firearm.

American made semi-automatic direct gas-impingement modern sporting rifle chambered for .308 Winchester, and manufactured in Cocoa, FL. Rifle features a matte black anodized finish on the aluminum components, T-marked flat-top picatinny upper receiver, 16" threaded barrel with a 1:10" twist rate, A2 bird cage style flash suppressor, no iron sights installed, smooth curved AR-15 single-stage trigger, integral oversized trigger guard, low-profile gas block, 10-1/2" aluminum Key-Mod free-float hand guard with a top picatinny rail, quick disconnect socket on the bottom of the handguard, staked gas key, standard charging handle, checkered A2 style pistol grip with a single finger groove, mil-spec six-position receiver extension, adjustable Roger's Super Stoc with a checkered black rubber recoil pad, serrated left receiver mounted manual safety, serrated bolt release paddle, spring loaded dust cover, annular cut bolt assist, annular cut magazine release, and a beveled magazine well. The original matte black anodized finish retained is approximately 97% with light edge wear, minor handling blemishes, and light speckled marks on the left side of the receivers. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. The stock, handguard, and pistol grip are in excellent condition with only superficial handling blemishes. Rifle does not include magazines. Condition is NRA Very Good. ***Modern Firearm***

(2) Gold-plated And (1) Burl Wood Mounted Oilers With Burl Wood Topped Large Brass Screw Top Accessory Box For Patches Or Small Parts.

American made pump-action shotgun chambered for 3" 12 Gauge shells, manufactured by Remington between 1978-1983 (not original barrel) in Ilion, NY. This Model 870 was converted into a slug gun with a rifled bore. Shotgun features a blued finish, receiver drilled and tapped for optic mounting, two optic blocks attached to the receiver, an approximately 24" Hastings round polygonal rifled barrel (made in France), raised blade front sight with a brass bead, fully adjustable 'U' notched rear sight, smooth curved trigger with beveled edges, annular cut push-button safety mounted on trigger guard, aluminum trigger guard, and dual action bars. The high gloss hardwood furniture consists of a semi-pistol grip shoulder stock with press checkering at the wrist, press checkered pump handle, black plastic grip cap with an embossed duck and a white spacer, sling stud on the magazine tube cap, sling stud on the bottom of the shoulder stock, 14" length-of-pull to the front trigger, and brown factory ventilated rubber recoil pad with white and black spacers. The original blued finish remaining is approximately 98% with superficial blemishes, and contact wear on the magazine tube. The trigger guard has edge wear, and wear from loading cartridges that were touched up with a marker. Metal displays two tiny spots of rust on the magazine tube, but no deformation. Action is smooth and crisp, and the bore is bright with strong rifling. Furniture wood is in very good condition with minor handling marks, and imperfections that look like bubbles at the edge of the butt stock. The magazine tube lug, on the barrel, looks like it was either a casting, or it was a old previously pitted lug from another barrel. Condition is NRA Good. ***Modern Firearm***

Russian (Soviet Union) made WW2 military bolt-action centerfire rifle chambered for 7.62x54R, and the receiver ring is dated 1939. Imported by Century Arms International out of Georgia, VT. (Left Receiver rail). Rifle features a blued arsenal finish, round receiver, an approximately 28-1/2" round barrel, cleaning rod under barrel, protected post front sight, tangent rear sight graduated to 2,000 meters, smooth curved trigger, fixed magazine with a hinged floorplate, in-the-white bolt, straight bolt handle, knurled cocking piece, and a stripper clip guides cut into receiver. The hardwood furniture consists of a smooth straight gripped shoulder stock, smooth full-length finger grooved forend, full-length smooth handguard, two barrel bands, sling slots in the forend and shoulder stock, and a smooth metal butt plate. Original serial number '2658' matches on the receiver, bolt, and magazine floorplate. The arsenal blued finish retained is approximately 90% with minor edge wear, and scratches and scuffs on the trigger guard and floorplate. Metal displays a very small and light area of rust on the butt plate, and there was a slight dent on the magazine. Furniture wood is in good condition with a fair amount of handling marks, and finish losses. Action is smooth and crisp, and the bore is a little dark with strong rifling. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

For gun boxes. 19th and 20th century. 19 good antique labels. In Hercules powder. Box all related gun subjects. Larry Shelton estate.

Includes two southwestern turquoise cip/nuggest necklaces one is 11" Long and the other is 8" Long. The third necklace is a double strand turquoise chip necklace

Eddystone Model 1917 SN: 552198 Receiver and Bolt. Manufactured 1918. Complete bolt, thumb safety, magazine, floorplate, trigger, triggerguard, bolt release. Parkerized finish, clear markings, flaming bomb and eagle head proofs. Very good condition, the top rear of the receiver been polished and is in the white.

Leupold VX-31 long Range Precision 8.5-25x50 Rear Focal scope. 1 click=1/4 MOA. Matte black finish, factory lens covers, T-MOA reticle. Scope is like new, clear optics.

(1) Feyachi Reflex Site(1)Daisy 93 CO2 Pistol (1)Daisy Six Gun SA Repeater (1) Daisy Red Ryder BB Gun(1) Wooden Stock and Forend (1) Recoil Absorber (1) Trading Post style medicine man staff

'Gamemaster,' an American made pump-action rifle chambered for .30-06 Springfield, and manufactured circa 1955. The Remington Model 760 Gamemaster was produced circa 1952 to 1981 with over 1 million rifles manufactured. Rifle features a blued finish, steel receiver drilled and tapped for optic mounting, a 22" tapered barrel, ramped dovetailed blade front sight with a silver-toned bead, elevation adjustable sporting rear sight, smooth curved trigger, dual action bars, accepts detachable box magazines, annular cut cross-bolt safety at the rear of the trigger guard, serrated bolt release at the front of the trigger guard, sling swivel at the front of the action tube, and a serrated magazine release at the front of the trigger guard. The hardwood furniture consists of a smooth semi-pistol gripped shoulder stock, grooved pump handle, sling swivel on the bottom of the shoulder stock, Pachmayr brown rubber stock sleeve, and a black serrated aluminum butt plate. The original blued finish retained is approximately 80% with scratches along the barrel, edge wear, and friction wear on the action tube. Metal displays no deformation. There are very few and small spots of oxidation, and pin-prick pitting on the receiver. Action is smooth and crisp, and the bore is bright with strong rifling. The furniture wood is in good condition with handling blemishes, and finish losses mostly on the shoulder stock. Rifle includes one magazine total, and a leather sling. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

American made safe-action semi-automatic compact pistol chambered in .380 Auto. This obscure model has long been available in international markets, but saw limited production in the US and is now out-of-production. Features a satin black finish, 4.02" barrel, white dot front sight, dovetailed rear sight with white outlined square notch, integrated trigger safety, push button magazine release, factory 15 round magazine and durable black polymer frame with integral accessory rail & textured finger groove grip. Includes the original factory hard case with documents, cleaning rod, brush, speed loader, and spare magazine. Pistol retains nearly all of its original finish showing little to no visible wear. The action is sound, the bore is excellent and the polymer is excellent. Condition is near NRA Perfect. ***Modern Firearm***

Brass framed Italian "replica" of the Confederate Navy Colt 1851 revolver, in 44 cal. Manufactured in Italy by Pietta in 1975, imported by Navy Arms. Non-fluted rebated cylinder with no rolled stamped scene. Features blued barrel & cylinder, case color finish on ram rod & trigger & hammer, 7.5" octagon barrel, brass backstrap and round trigger guard, one piece smooth walnut grip. Brass has an aged patina color, some brown spots, action is sound, the bore is very good, strong rifling, the grip is sound with many very minor scratches, the case colors are feint, mostly all there and the blue has heavy wear/finish loss, mostly on the cylinder, some scattered spots of surface rust. Missing wedge screw. Condition is NRA Fair. Antique Firearm.

Depicting a ceramic two tone metallic colored finish. Anjali Moudra which is a gesture of offering greeting and devotion. Measures 30" x 21"

A Native American Wooden Skull Crusher measures 18.5" . Shows age and use. Native American Tomahawk. A wood Handle and skull crusher with metal blade, measures 28" overall with a 6 1/2" blade. Collection of Northwest Cost Mini Totems. A Native American Snake Handpainted. A Lot of Prehistoric Pots,

American made bolt-action magazine fed rimfire rifle chambered for 22 Long Rifle, and manufactured between 1988 and 1991 in Rogers, AR. Rifle features a 19" mirco-grooved sleeved octagonal barrel, ten-round detachable rotary magazines, raised fixed blade front sight, smooth curved trigger with beveled edges, flat turned down bolt handle, Weaver type integral scope rail, annular cut cross-bolt safety at the front of the trigger guard, and serrated sliding magazine release. The polymer wood grained furniture consists of a smooth semi-pistol gripped shoulderstock with a right hand cheek piece, smooth forend, sling swivel studs in forend and shoulder stock, ammo storage in stock, black and silver colored Legacy trademark on the grip cap, and a black serrated plastic butt plate. The original matte black finish retained is approximately 96% showing small nicks, edge wear and light handling blemishes. Metal displays no rust, or deformation. The plastic screw in the shoulder stock shows slight deformation in its slot. The action is smooth and sticky from dried oil residue, and the bore is bright with strong rifling. The polymer furniture is in excellent condition. Rifle includes the original factory cardboard box with end label. Condition is NRA Very Good. ***Modern Firearm***

Signed by Lance Armstrong.

'Series 4'. This is Japanese WW2 military carbine that has been sporterized. The modifications involve the stock, which has been shortened with the hardware and cleaning rod removed, that has been 5 grip groves cut into each side of the wrist. The 19.2" barrel with the original sights are intact, full chrysanthemum on the chamber, egg shaped bolt knob, spring loaded floor plate intact, the original blue has faded somewhat, but mostly all there. The bore has very strong rifling with some light roughness in the grooves. Upland Game slip-on rubber recoil pad installed. Might be worth restoration or parts. NRA Condition-Good/Sporterized. C&R Firearm.

Bell & Carlson Tactical Medallist Rifle Stock for a Remington 700 Long Action. Textured black polymer with flat forearm, three sling studs and a solid black rubber Decelerator recoil pad. Varmint Barrel Channel. Excellent condition.

Features manually adjustable M1-type windage and elevation adjustment. The accuracy of the windage and elevation adjustment is set to 1/4 M.O.A. per click. Mil-Dot reticle, factory lens covers, SFP, 6061-T6 Aircraft Quality Aluminum. Scope is like new, clear optics.

Marked "T. Allen S.F. (San Francisco)" with Dog's Head trademark and hand forged. Stag horn grip with period sheath. 4-7/8" blade and 8=5/8" overall (approx.) Minor pitting and erosion on steel. Tip blunted with normal use and wear. Fair to good overall with uncleaned patina. Sheath is period and handmade, also fair to good with normal aging, carry evidence of use.

wood stock and brass accents, London marked.

Vintage American made magazine fed semi-automatic sporting rifle chambered in .22 Long Rifle, manufactured circa 1948-1952. Rifle features a blued finish, steel receiver with integral cuts for Tip-Off style optic rings, an 18" slightly tapered barrel, shrouded fixed post front sight, rear aperture sight removed with mounting bracket in place, smooth curved color-case trigger, black plastic finger groove trigger guard, accepts detachable 7 round magazines with a serrated release inside the magazine well, and a push in charging handle with cutouts for safe and for bolt-hold-open. The walnut furniture consists of a smooth round knobbed Monte Carlo style shoulder stock, smooth fold-down forend, side mounted sling swivels, and a serrated black plastic butt plate. The original blued finish retained is approximately 90% with light scratches and edge wear. Metal displays no deformation, but there is a small amount of oxidation on the barrel and receiver. The action seems to work fine, but it feels gummy and probably needs to be cleaned. The bore is bright with strong rifling. The furniture wood is in very good condition with light handling marks. Rifle includes a tan nylon sling, and no magazines included. Condition is near NRA Good. ***Modern Firearm - C&R Eligible***

Semi-automatic compact pistol, chambered for 9x19mm Luger. Features a black Nitron finish, black polymer grip frame with textured grip and accessory rail , 3.9" barrel, reversible push button magazine release, under cut trigger guard, striker fired with wide curved trigger. Bore is pristine. Retains approx. 80% finish with edge wear, light rust on and around the sights w/scattered scratches. Frame has some nicks and scrapes due to normal use. Includes one factory 15rd magazine. Condition is NRA Good. ***Modern Firearm***.

'Escort' Vintage semi-automatic concealed hammer pocket pistol chambered in .22 Long Rifle. Features a blued slide, 2 1/8" barrel, blade front sight, dovetailed rear sight with square notch, forged aluminum frame finished in dark grey, heel magazine release, factory 5 round magazine, smooth trigger, manual safety and two-piece checkered faux wood plastic grips. Bore is very good condition. Pistol retains 85% finish, with edge losses and light patina on slide. Grips are very good. Includes an original factory zippered soft case, factory paperwork, (1) magazine. Condition is near NRA Very Good++*** Modern Firearm ***

by Webb Young, signed. Measures 20"x14". Entitled Portrait of Era depicts a western scene at a post office. Webb Young (1913 - 2005) was active/lived in New Mexico, Colorado. Webb Young is known for Southwest landscape, Indian figure-genre

Browning Superposed shotgun stock. Checkered "Prince of Wales" grip. No recoil pad. Overall very good condition with many very light scratches, barely noticeable.

Signed N. Guni and dated '84 in lower left corner. Measures 23" x 27 1/2" in white painted wood frame; painting measures 15 1/2" by 19 1/2".

Italian-made, single-action .22 LR rimfire revolver. Imported by Excam Inc. (Hialeah, FL). Features Colt Single Action Army styling, 4.75" barrel, a 6-round capacity, and fixed sights, checkered black plastic grips with thumb rest on the left panel, manual hammer block safety. Manufactured 1984. Action is smooth with tight lock-up, bore is excellent/bright, finish has some holster wear and the grips are excellent. NRA Condition-Very Good. Modern Firearm.

MDT ORYX Chassis Stock fits Savage 10/110 SA/RH - OD Green. Complete, very good condition.

Leupold Competition 30mm Tube Diameter Rifle Scope , SFP, screw on factory aluminum lens covers, Leupold Target Crosshair Reticle, matte black finish. Scope is like new, clear optics.

With geometric designs in tan, blue, green and white. Measures 70"H x 48"W

American made vintage tube-fed semi-automatic sporting rifle chambered for .22 Long Rifle, and manufactured circa 1928 ('CW' date code) in Ilion, NY. The Remington Model 24 was based on Browning designs, and it was produced circa 1922-1935. Rifle features a blued finish, 19" take-down barrel, dovetailed blade front sight with a silver-toned bead, elevation adjustable sporting rear sight (missing elevator screw), smooth curved color-case trigger, serrated bolt charging piece (bottom of the receiver), checkered push-button safety at the front of the trigger guard, and a magazine tube inside the shoulder stock. The walnut furniture consists of a smooth semi-pistol gripped shoulder stock, smooth Schnabel forend, loading port on the right side of the shoulder stock, and a smooth steel butt plate with a magazine tube hole. The original blued finish retained is approximately 75% with edge wear, handling blemishes, and the finish taking on a dark mottled gray patina. Metal displays no deformation, but sparse oxidative speckling and light pin-prick pitting was observed on the metal components. The furniture wood is in poor condition with minor handling marks, and cracks at the rear of the receiver. We were not able to take down this rifle. Condition is NRA Poor. ***Modern Firearm - C&R Eligible***

With name on top. Full of misc., including 2 "Liddle & Kaeding" all brass bullet molds and dual bullet and ball mold, marked for "Schneider (rifle)" # c-1 on his inventory. Excellent cavities. A bonanza lot.

Vintage American made magazine fed semi-automatic sporting rifle chambered in .22 Long Rifle, manufactured circa 1948-1952. Rifle features a blued finish, steel receiver with integral cuts for Tip-Off style optic rings, an 18" slightly tapered barrel, shrouded fixed post front sight, adjustable left receiver mounted rear aperture sight, smooth curved color-case trigger, black plastic finger groove trigger guard, accepts detachable 7 round magazines with a serrated release inside the magazine well, and a push in charging handle with cutouts for safe and for bolt-hold-open. The walnut furniture consists of a smooth round knobbed Monte Carlo style shoulder stock, smooth black plastic fold-down forend, side mounted sling swivels, and a serrated black plastic butt plate. The original blued finish retained is approximately 97% with light handling blemishes, and a small loss on the receiver's optic rail. Metal displays no deformation, but there are a couple of small spots of oxidation on the barrel. The action is smooth and crisp, and the bore is bright with strong rifling. The furniture wood is in very good condition with light handling marks. Rifle includes a tan nylon sling, and no magazines included. Condition is near NRA Good. ***Modern Firearm - C&R Eligible***

These are three sterling silver pendants with chains. Including handcrafted. One is an elongated oval spoon shaped silver frame with a turquoise stone set in an open shadow box. One silver cross with crosslet style arms includes reddish and blue traditional stones. One is an ornate design with an oval turquoise cabochon bezel set and accented with feather

Two rings features the classic Square and Compasses with the letter G in the center. This is the primary emblem of the Blue Lodge/Master Mason degree. One ring is silver and a related fraternal piece.

Includes German made replica of a Colt SAA with 4 3/4" barrel. Marked "BKA/98". Two piece wood grips, extractor works, loading gate, gray finish, hammer action works but cylinder does not index. Markwell Arms Co. copy of the .41 cal. percussion single-shot blackpowder Philadelphia derringer. 3" barrel, one piece stock with brass fittings. Hammer action works, stainless steel finish has scattered spots of surface rust.

With chrome finish and wood grip. Made in Germany. Includes original box and 4.5mm caps

Two vintage rifle scopes. 1) Leupold fixed power scope with a duplex reticle, Butler Creek lens covers, 1" two-piece quick release rings, and a 40mm adjustable objective. Scope shows some metal deformation on the bottom of the eye piece section. Sight picture appears bright and clear. 2) Bushnell Sportview Wide Angle, a 3-9x40mm scope with a duplex reticle. Scope include 1" two-piece Weaver rings, and lens covers. The condition of this scope appears to be excellent. Sight picture is bright and clear. Product number is '79-3940M AH'.

A) "Bailey, Farrel & Co, Pittsburg" pat'd 1886. Missing containers for powder and shot plus misc. small pieces. Fair to good condition as spring not perfect and aging. B) 19th century unmarked and nickel-plated 12GA shotgun sizer & capping tool. Very good condition. C) 19th century unmarked shotgun priming tool.

MDT Oryx Chassis Howa 1500 LA / Weatherby Vanguard. SA/RH. OD green. Complete, very good condition.

For standard frame semi auto pistol. Probably dealer supplied and possibly pre-war, in near fine condition with lovely rainbow and pink colors that are not found on later white pearl brass grips.

Toy in box. Toy is near fine and works but not perfectly. Box has tatters, teams and flaps present but detached.

Turn of Century to Pre WWII gatling gun toy that shoots wooden pencil shaped projectile. Constructed of wood BBL and sheet metal. (Single shot). Fair to good condition. 5 projectiles. Measures 3-1/2" x 5-1/2"

Tank Circa Pre WWII with photo. Most original paint; fair to good condition. Working buy not perfectly. Former Chuck Abshire collection known for military vehicles and cannons

Remington 700 long action precision stock. Gray/black web polymer stock with sling studs, thin factory recoil pad, aluminum bedding, BDL, hinged floorplate. Overall very good/sound with some discoloration on the comb where a adhesive cheek rest once was.

Ranging from sizes 24" down to 14"

American made full-size striker-fired semi-automatic pistol chambered for .40 Smith & Wesson, and manufactured in Springfield, MA. The Smith & Wesson SW40VE was introduced in 1999 as the “Value Enhanced” second-generation Sigma chambered in .40 S&W. Pistol features a matte finished stainless steel slide with rear cocking serrations, a 4" ramped barrel, full-length guide rod assembly with a flat recoil spring, fixed blade front sight with a white dot, dovetailed square notched rear sight with two white dots, smooth two-piece safety trigger, serrated push-button magazine release, black polymer frame with a checkered grip, and an integral accessory rail on the dust cover. The original satin stainless steel finish retained is approximately 95% with light scratches, and edge wear. The slide is very dirty. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. The frame polymer is in excellent condition with superficial handling marks on the magazine well. Pistol includes a black nylon holster, and one magazine total. Condition is NRA Very Good. ***Modern Firearm***

A) Ivory (walrus)gripper tool, marked J. Haviland - June 21, 1870. Not identified. Good condition. B) 3 M's tools. C) Powder dipper 35 gr - shook marked. D) J. Hudson & Co - 1843 - marked Police or Sargeants drill whistle. Broadhead British military proof. E)Walrus ivory whistle - very good. F) 15 keys, including brass Adlake caboose keys and other interesting 19th to early century .

Navajo rings of mixed stone, single stone and row style turquoise rings

American made manual cocking single-shot bolt-action rifle chambered for .22 Short, Long, and Long Rifle. The Mode 67 was in production circa 1934-1963. Rifle features a blued finish, single piece construction barrel and receiver, 27" slightly tapered barrel, dovetailed blade front sight with silver-toned bead, elevation adjustable sporting rear sight, chromed trigger & bolt, turned-down and swept-back bolt handle, stamped metal trigger guard, knurled cocking piece, and a manual flag type safety on the rear of the bolt. The walnut furniture consists of a smooth semi-pistol gripped shoulder stock, smooth finger grooved forend, and a black factory composite butt plate. The original blued finish retained is approximately 50% with light edge wear, minor handling blemishes, and the finish starting to take on a brown patina. Metal displays no rust, or deformation. The chrome finish on the bolt is showing minimal wear. Action is smooth and crisp, and the bore is bright with strong rifling. The walnut furniture is in good condition with some minor handling marks, and a good amount of finish loss. Condition is NRA Good to Very Good. ***Modern Firearm - C&R Eligible***

Without tripod. Unmarked. 10-1/2" length, 6-3/4" across arms. Optics clear.

This is an Order of the Eastern Star (OES) Masonic ring in yellow gold. Ring size 6.5. 10Kt gold.

1/2 MOA windage and elevation friction adjustments Fully coated lenses, wide duplex reticle, SFP, matte black finish. Comes in factory box with non-matching, instructions. Scope is like new, clear optics.

Antique gun case in fitted French style with silver plaque on top of lid inscribed Tcolleghi del commando corps S.M. with Air Force emblem and signature facsimile along with 1937 date on left. The case is fitted for two "Rat Tail" Flintock North African pistols, a flask of same origin and a large dagger also of that design or from that area. Pistols were 21-1/2" overall and dagger about 21-1//2" also. Box 25H" x 14W" by nearly 3", sliver plate inlaid 10-1/2" across center about the time the Italian Fascists under Mussolini moved into North Africa where the guns and dagger of this style were used and carried. Interesting to research further.

Croatian made semi-automatic striker fired pistol chambered for 9x19mm Luger, and imported by Springfield Armory out of Geneseo, IL. Pistol features a billet machined Melonite finished slide, a 4-1/2" hammer-forged barrel with a Melonite finish, front and rear slide serrations, optic cut slide, dovetailed tritium blade front sight with a white outline, tritium 'U' notched rear sight with white outlines, smooth slightly curved trigger with an integral passive blade safety, full-length plastic guide rod assembly with a flat recoil spring, serrated ambidextrous slide stop, granular textured take-down lever, black medium sized grip module with granular texturing on its entire grip, undercut trigger guard with granular texturing on the front and bottom, picatinny accessory rail on dust cover, and serialized stainless steel insert (registered firearm, 'Central Operating Group'). A Veridian green dot sight is mounted to the slide, and it functions well. The original black Melonite finish retained is approximately 99% with nothing remarkable. Metal displays no rust, or deformation. The action is smooth and crisp, and the bore is bright with strong rifling. The polymer grip module is also excellent with little to speak of. Pistol includes the original factory cardboard box with matching end label, five 17-round OEM magazines total, paperwork, two extra backstraps, magazine speed loader, magazine base plate, two soft pistol cases, and a cable lock. Condition is NRA Excellent. ***Modern Firearm***

American made break-action single-shot shotgun chambered for 2-3/4" 20 Gauge shells, manufactured between 1936-1963 in New Haven, CT. Model 37's were manufactured without date stamps or serial numbers, and about 1,015,000 firearms were made, so it is hard to pin-point an exact date of manufacture. Shotgun features a blued finish, an approximately 28" round barrel, the fixed choke measures 'Improved Modified' with a drop-in gauge, steel bead front sight, smooth curved trigger with beveled edges, serrated hammer spur, checkered top lever, and extractor. The hardwood furniture consists of a smooth semi-pistol grip shoulder stock, smooth forend, 14" length-of-pull, 1-1/4" drop at comb, 1-3/4" drop at heel, and black checkered Winchester plastic butt plate. The original blued finish retained is approximately 96% with minor handling blemishes, and light edge wear. Metal displays slight deformation in the forend screw slot, and a very small nick on the barrel. Light spots of rust were observed with small amounts of pin-prick pitting. The bore is smooth and shiny with very small amounts of rust. The furniture wood is very good with very light handling marks for its age. The action is smooth and locks up tight, the barrel falls under its own weight easily. The top lever rests to the right of the tangs centerline. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

American made bolt-action single-shot rimfire rifle chambered for 22 Long Rifle, Long, and Short ammunition. Manufactured between 1988 and 1991 in Rogers, AR. Rifle features a 19" micro-grooved sleeved octagonal barrel, serrated raised fixed blade front sight, smooth curved trigger with beveled edges, flat turned down bolt handle, 3/8" dovetail integral scope rail, and annular cut cross-bolt safety at the front of the trigger guard. The wood furniture consists of a smooth semi-pistol gripped shoulder stock, smooth forend, sling swivel studs in forend and shoulder stock, and a black serrated plastic butt plate. A fixed power scope with a duplex reticle is mounted on this rifle using 7/8" rings. The original matte black finish retained is approximately 95% with paint flaking on the handguard ferrule and trigger guard, edge wear and light handling blemishes. Metal displays no rust, or deformation. The action is smooth and crisp, and the bore is dirty, but bright with strong rifling. The furniture wood is in good condition with handling marks, and edge wear. The stock is in sound shooting condition, and the scope's sight picture is bright and clear. Condition is NRA Good. ***Modern Firearm***

Three U.S. .50 caliber ammo cans containing .303 British Ammo/brass. 1) Contains loose .303 British cartridges with "FNB" & "80" headstamps, FNB stands for Fabrique Nationale Herstal (a Belgian arms and ammunition manufacturer), while 80 indicates the year of manufacture, 1980, military-grade ammunition. Can is about half full, weighting 15.50 lbs, minus the weight of the ammo box, which would come to approximately 313 to 326 rds. 2) Contains four unopened bags of PPU .303 unprimed brass of 50 each, total 200, one unopened box of 100 of Hornady Interlock 174 gr RN bullets, one box of 17 PPU 150 gr SP BT cartridges, one box of 19 Remington Core-Lokt 180 gr SP .303 cartridges, one box of 20 Sellier & Bellot 180 gr FMJ .303 cartridges and box of 15 UMC 174 gr cartridges for a total of 71 cartridges. 3) 4 bags of misc. .303 unprimed brass, 3.20 lbs. Remington, PPU, etc, one box of Hornady Interlock 150 gr SP bullets, about 50, half the box, two boxes of 20 each Hotshot 180 gr, boxer primed .303 rds, box of 4 .303 FMJ BT 174 gr rounds, box of 5 .303 180 gr, JSP bullets, one box of 20 Sellier & Bellot FMJ rounds and one box of 16 UMC 174 gr rounds. 85 rounds total.

#c012765u American made pump-action shotgun chambered for 3" 20 Gauge shells, and made in Ilion, NY. Manufactured circa 1997 with prefix 'C' and date code 'WR'. Shotgun features a matte parkerized finish, an approximately 25-1/2" vent rib barrel, accepts screw-in choke tubes, choke measures 'Improved Modified' with choke installed, steel bead front sight, rear trigger guard mounted annular cut push-button safety, and smooth curved trigger with beveled edges. The matte finished hardwood furniture consists of a semi-pistol gripped shoulder stock with checkering at the wrist, checkered and finger grooved pump handle, 14" length-of-pull, and factory black solid rubber recoil pad. The original parkerized finished retained is approximately 98% with superficial blemishes, and contact wear from the slide action. There is no observed metal deformation, but light rust can be seen on the top of the receiver. The magazine tube bracket/ring is taking on a copper patina. Bore is bright and shiny, and the action is smooth and crisp. Furniture wood is in very good condition with minor edge wear, and a few light blemishes. Condition is NRA Good. ***Modern Firearm***

12 cap and shot holders, in steel and brass. 1 case hardened, 1 brass priming type with measure, Sykes patent, Dixon, marked for shot weight, and several not marked. Value up to $150 each. Also includes 6 miscellaneous cap tins

American made short recoil operated semi-auto pistol chambered for .45 Automatic Colt Pistol, and manufactured circa 2001 in Southport, CT. The Ruger P90 was in production from 1991 to 2010 (Product SKU 06622). Pistol features a two-toned finish with a satin stainless steel slide and gray anodized aluminum frame, a 4-1/2" ramped barrel, full-length metal guide rod, pinned blade front sight with a white dot, dovetailed square notched rear sight with two white dots, smooth curved trigger, serrated push-button magazine release, serrated slide stop, ambidextrous serrated slide mounted thumb safety/decocker, external ring hammer with a serrated spur, smooth grip straps, and two-piece grooved black plastic grips with Ruger trademarks on both sides. The original matte finish retained is approximately 97% with minor edge wear, and light handling blemishes. Metal displays no rust, or deformation. Action is smooth and crisp, and the barrel is bright with strong rifling. The grip polymer is in good condition with light handling marks. Pistol includes four magazines total, and a black nylon holster. Condition is NRA Very Good. ***Modern Firearm***

Seven Dine pots various sizes. Eleven Acoma pots.

American made exposed hammer single-shot break-open shotgun chambered for 2-1/2" .410 Gauge shotshells, and manufactured in Chicopee Falls, MA. Shotgun features a 26" tapered barrel, the fixed choke measures 'Full' with a drop-in gauge, brass bead front sight, automatic shell ejector, smooth curved trigger, external hammer with a checkered spur, checkered top lever, and a stamped metal trigger guard. The refinished hardwood furniture consists of a smooth round knobbed shoulder stock, smooth forend, 13-1/4" length-of-pull, and a serrated black plastic factory butt plate. The original finish retained is approximately 5% with the finish being nearly cleaned from this firearm. Metal displays slight deformation in some of the screw slots, and there are some minor dings on the barrel. A light oxidative frosting coats the metal parts. Action functions soundly with the top lever resting to the left of the tangs centerline. The barrel falls quickly under its own weight, and the is a little wobble in the lock-up. The bore bright with some light scratches. The refinished furniture wood is in good condition with handling blemishes, material transfers on the shoulder stock, and the name 'ALEX' carved into the left side of the shoulder stock. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

Vintage custom knife with yellow stag horn grip attributed to Tit Herington by old time California collector Larry Shelton. 6" blade, 10 1/4" overall, with thick staghorn grips or scales and aluminum mounts. Curved blade with serrated back and no scabbard. Estimated 1940s to 70s by the style but unmarked with no direct reference to this maker found in our research. Good used condition

Two rings are size 7 and the turquoise turquoise turtle ring is 6.5.

1) Bushnell Magnum Phantom 2.5X pistol scope. Manufactured in Japan between 1976 and the mid-1980s, slender 7/8" main tube, 20mm objective lens, and extended eye relief. Fine crosshair reticle, factory lens caps. Very good condition, clear optics. 2) Bushnell Banner 4x-12x40 rifle scope, wide angle, duplex reticle. very good condition, clear optics. Ruger style scope rings attached.

American made semi-automatic centerfire rifle chambered for 7.62x39mm ammunition, and was manufactured circa 1990 in Southport, CT. Rifle features a blued finish, integral proprietary optic on the receiver, 18" pencil barrel, large blade front sight, dovetailed elevation adjustable folding rear peep sight, manual blade safety inside trigger guard, stamped trigger guard/take-down lever, smooth curved two-stage trigger, magazine release paddle inside magazine well, manual bolt hold-open button on top of the left receiver rail, and a smooth operating rod handle. The hardwood furniture consists of a smooth semi-pistol gripped shoulder stock, smooth forend, ventilated black plastic handguard, sling swivel on the bottom of the shoulder stock, sling swivel on the gas block, and a smooth black plastic butt plate. The original blued finish retained is approximately 94% with minor handling blemishes, and edge wear. Metal displays no deformation, but there is light oxidative speckling on several components. Action is smooth and crisp, and the bore is fair with decent rifling. Bore shows oxidation, and a lot of fouling. Furniture wood is in very good condition with some blemishes, a small area of thinning on the shoulder stock, and edge wear. Rifle includes one magazine total. Condition is NRA Fair to Good. ***Modern Firearm***

American made hammer fired micro-compact single-action pistol chambered for 9x19mm Luger, and manufactured in Springfield, MA. The CSX was introduced in 2022. Pistol features a matte black Armornite slide finish, front and rear slide serrations, a 3.1" barrel with a loaded chamber view port, dovetailed blade front sight with a white dot, dovetailed serrated square notched rear sight with two white dots, full-length metal guide rod with a flat recoil spring, serrated ambidextrous safety, serrated ambidextrous slide stop/takedown lever, external skeletonized hammer with a serrated spur, flat faced trigger with integrated safety, reversible granular textured push-button magazine release, aluminum insert (registered firearm), black polymer grip module with interchangeable backstraps and 18 degree grip angle, granular texturing on the backstraps, granular texturing on the front strap, extended beavertail, beveled magazine well, and undercut trigger guard. Pistol retains approximately 99% of its original matte black Armornite finish with nothing remarkable. Metal displays no rust, or deformation. The action is smooth and crisp, and the bore is bright with strong rifling. The polymer grip module is also in excellent condition. Pistol includes the original factory carboard box with matching end label, documents, two OEM magazines total (one 12-round, and one 10-round), and a cable lock. Condition is NRA Excellent - Like New. ***Modern Firearm***

#nh472678 American made single-shot break-open centerfire rifle chambered for .223 Remington, and manufactured in Gardner, MA. The Handi Rifle SB2 Rifle was introduced in 2007. Rifle features a blued finish, an approximately 22" semi-heavy barrel with a recessed crown, no provisions for iron sights, barrel drilled and tapped for optic mounting, installed scope rail, smooth curved trigger, plastic trigger guard, external hammer with a serrated spur, and a serrated action lever mounted to the right of the hammer. The hardwood furniture consists of a smooth semi-pistol gripped shoulder stock, smooth forend with a sling stud, sling stud on the bottom of the shoulder stock, high comb, and a black ventilated rubber recoil pad with a white spacer. An Ultralux 4x25mm scope with a duplex reticle is mounted to the rifle using two-piece 1" rings. The original blued finish retained is approximately 98% finish with some brown patina forming behind the trigger guard. Metal displays extremely minor oxidation behind the trigger guard, but there was no deformation observed. Bore is bright with strong rifling, and the action is smooth and crisp. Furniture wood is in excellent condition with little to speak of. Scope's sight picture is bright and clear with a slight yellowing. Condition is NRA Good. ***Modern Firearm***

Vintage American made bolt-action rimfire rifle chambered for .22 Short, Long, and Long Rifle ammunition, and manufactured in New Haven, CT. The Model 46B was manufactured from 1938 until 1945. Rifle features a blued finish, an approximately 26" round barrel, full length magazine tube, protected Mossberg S-101 front sight with multiple inserts, adjustable Mossberg S-130 rear receiver sight, serrated curved trigger, turned down bolt handle with a round knob, serrated rear receiver mounted manual safety, and black plastic finger groove trigger guard. The walnut furniture consists of a smooth semi-pistol gripped shoulder stock, smooth forend, quick detach sling brackets/mounts on the forend and shoulder stock (provide T slots for a vintage style swivel), and a serrated black plastic butt plate. The original blued finish retained is approximately 92% with edge wear, handling marks, and light thinning. Metal displays slight deformation in a couple of the screw slots, and there is thin scattered rust. Bore is bright with visible rifling, and the action is smooth. The furniture wood is in good condition with scattered handling marks, and edge wear. Condition is NRA Fair to Good. ***Modern Firearm - C&R Eligible***

SN: W02646. 30mm tube, aircraft-quality, hard-anodized aluminum body, Max Elevation & Windage Adjustment- 40 MOA, SFP, battery-free dual-illumination system using fiber optics and tritium, which automatically adjusts reticle brightness to ambient light. Duplex reticle. Scope is like new, clear optics. Comes in factory box with matching label.

Austrian made striker fired semi-automatic sub-compact pistol chambered in .40 Smith & Wesson, and manufactured circa 2003. Pistol features a matte black Nitride finished slide, 3.43" barrel with polygonal rifling, tritium fixed blade front sight with white outline, dovetailed tritium square notched rear sight with white outline, bull-nosed slide, full-length metal guide rod assembly with dual recoil springs, 'Safe-Action' serrated curved trigger with integral blade safety, serrated push-button magazine release, serrated slide stop, textured front trigger guard, and durable black polymer frame with textured finger groove grip (grip tape applied). The original nitride finish retained is approximately 99% with light edge wear, and superficial handling blemishes. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong polygonal rifling. The frame polymer is in excellent condition with little to speak of other than the applied grip tape. Pistol includes the original factory hard case with documents, cable lock, spent case, cleaning tools, two 8-round OEM magazines, a .357 Sig barrel, and speed loader. Condition is near NRA Near Excellent. ***Modern Firearm***

Consists of 4 pieces. A) Oak, brass and leather strap bird carrier marked "James Dixon-Shefield". Good condition. 19th century to early 20th century. 20" x 2-1/4" (approx.). B) Maple or fruitwood bird carrier with brass and leather strap. Good condition. Late 19th to 20th century. C) Spirit level 28" x 2-1/2". Late 19th century. Unmarked. D) Winchester 26" level fair to good overall with use and imperfections.

Some Indian style and some from India all beaded

Double-bbl, back action percussion side lock shotgun circa 1860's-70's. Approx. 20 GA with 30" bbls and 46-1/2" overall. Steel ramrod. Stock shows refinish and repair. Right hammer not holding on full cock and left hammer missing screw. Condition is NRA Fair. Antique Firearm

Large and small shell cameos, starburst brooch set, and mixed group of dress clips.

Vintage American made single-shot break-barrel rifle chambered for .22 Long Rifle, and manufactured in Plymouth, MI. C.J. The Hamilton & Son's Model Number 27 was designed to be a boys first rifle. This was the most popular rifle of the Hamilton line, and it was manufactured from 1907 to 1930 with over 500,00 produced. Rifle features a blued finish, an approximately 15" round barrel, fixed blade front sight, fixed 'V' notched rear sight, single-action hammer, checkered locking bolt, smooth curved trigger, and an external hammer with a checkered spur. The walnut furniture consists of a smooth straight gripped shoulder stock, smooth forend, and a smooth steel butt plate. Receiver is stamped on the left side reading, "THE HAMILTON RIFLE No 27 .22 CAL, PATENTED OCT.30.1900-AUG.13.1907, MFD. BY C.J. HAMILTON & SON, PLYMOUTH, MICH. U.S.A.". The original blued finish retained is approximately 93% with edge wear, handling blemishes, and the metal taking on a dark gray and brown patina. Metal displays some light areas of rust along the barrel and other areas. A small amount of deformation was observed in some of the screw slots, and the muzzle is flared a bit with the barrel sleave splitting. The action works smoothly with a good lock-up, and the bore is frosty with visible rifling. The furniture wood is in excellent condition with a screw missing from the rear of the trigger guard. This rifle is exempt from being a short barreled rifle. Condition is NRA Fair. ***Modern Firearm - C&R Eligible***

This is an Order of the Eastern Star (OES) ring. Classic five pointed star emblem including five traditional colors representing the five heroines. 14kt, size 7.

American made micro-compact semi-automatic striker-fired pistol chambered for 9x19mm Luger, and manufactured in Springfield, MA. Pistol features a stainless steel slide with a matte black Armornite finish, a 3.1" stainless steel Armornite finished barrel, dovetailed blade front sight with white dot, dovetailed square notched rear sight with two white dots, rear slide serrations, full-length metal guide rod assembly with dual recoil springs, smooth curved two-piece trigger safety trigger, granular textured polymer frame with S&W M&P logos on both sides, slightly undercut trigger guard, granular textured push-button magazine release, serrated frame mounted manual safety, serrated slide stop, and serrated take-down lever. The original Armornite finish retained is approximately 99% with little to speak of. Metal display no rust, or deformation. The action is smooth and crisp, and the bore is bright with strong rifling. Frame polymer is in excellent condition with nothing remarkable. Pistol includes the original factory cardboard box with end label, instruction manual, five OEM magazines total (one 7-round, and four 8-round), and cable lock with two keys. Condition is NRA Excellent - Like New ***Modern Firearm***

Chinese made pump-action shotgun chambered for 2-3/4" 12 Gauge shells, and imported by JTS Group Katy, TX. Shotgun features a matte black finish, an approximately 18-1/2" barrel, brass bead front sight, fixed choke measures 'Cylinder' with a drop-in gauge, 4-round tube magazine, knurled magazine tube cap with a sling stud, dual action bars, smooth curved trigger, annular cut push-button safety on trigger guard, and a smooth bolt release mounted to the left of the trigger guard. The matte black synthetic furniture consists of a finger grooved pistol gripped shoulder stock with hex-shaped texturing, hex textured slide handle with M-Lok slots and strap slots, fixed shoulder stock with quick detach sockets, and a black serrated solid rubber recoil pad. A picatinny accessory rail extends over the receiver that is integral to the furniture. The original matte black finish retained is approximately 98% with contact wear on the magazine tube, and very light handling blemishes on the left side of the receiver. Metal displays no deformation, but there is a small amount of oxidation on the front face of the receiver around the magazine tube. Action is smooth and crisp, and the bore is bright and smooth. The furniture polymer is in excellent condition with nothing remarkable. Condition is NRA Good. ***Modern Firearm***

Turkish made semi-automatic striker fired centerfire pistol chambered for 9x19mm Luger, and imported by Rock Island Armory Imports out of Pahrump, NV. Pistol features a two-toned finish with a matte black slide, front and rear slide serrations, a 3.86" barrel, fixed red fiber optic fixed blade front sight, green fiber optic dovetailed square notched rear sight, full-length guide rod assembly with dual recoil springs, smooth nearly flat faced trigger with an integral blade safety (safe-action type), firing pin block, drop-safe trigger block, fully textured Flat Dark Earth (FDE) polymer frame, black interchangeable backstraps, black magazine funnel, undercut trigger guard with texturing on the front, picatinny accessory rail on the dust cover, extended serrated slide stop, and reversible serrated push-button magazine release. The original matte black finish retained is approximately 99% with nothing remarkable. Metal displays no rust, or deformation. Bore is bright with strong rifling, and the action is smooth and crisp. The frame polymer is in excellent condition with little to speak of. Pistol includes the original factory black plastic foam lined hard case, three magazines total (two 15-round, and one 17-round), trigger lock, cleaning tools, and three interchangeable backstraps. Condition is NRA Excellent. ***Modern Firearm***

This is a black powder percussion cap double-barrel derringer style pistol, and it is manufactured by Classic Arms. This pistol lacks informational markings. Pistol features an in-the-white metal finish, steel barrels and frame (magnetic), 3-5/16" barrels, smooth spur trigger, external hammer with a serrated spur, action lever on the bottom of the barrels and frame (barrels rotate/pivot), sooth grip straps, and two-piece faux pearl grips. The original in-the-white finish retained is 98% with some handling blemishes. Metal displays some dings, and there is some minor oxidation on the front of the barrels and in the bores. Action works, but the pins drift when the barrels are rotated. The bores are smooth and bright, and appear to be unfired. The faux pearl grips are in excellent condition with little to speak of. Condition is NRA Good. ***Antique Firearm***

American made .22 Long Rifle Glock conversion kit intended for the G19 and G23, and manufactured in Valencia, CA. by Advantage Arms, Inc. The conversion kit features a matte black hard anodized aluminum slide, black oxide finished steel parts, full-length metal guide rod assembly, 4.02" barrel (either 416 stainless steel or 4140 steel), fixed blade front sight with a white dot, dovetailed fully adjustable square notched rear sight with a white outline, slide lock capability, internal firing pin block safety, and last round hold-open. This kit also includes a black factory foam lined hard case, instruction manual, one magazine total, Break Free CLP, one magazine total, cleaning rod, cleaning swabs, and cleaning rod attachments. The kit can be easily installed onto your Glock without any permanent modifications. The matte black anodized slide finish retained is approximately 99% with only superficial handling marks. The bore is bright with strong rifling. The overall condition is excellent - Like New.

2 Pins And Watch Fob Locket. One pin is a marcasite style beaded pave setting, one pin includes a dark red shield crest art deco shape and an open photo locket

Vintage American made semi-automatic magazine fed rimfire rifle chambered for .22 Long Rifle, and manufactured in 1975 ('OZ' date code). The Remington Mohawk 10C is part of the Nylon series, and was in production from 1971 until 1978 with roughly 129,000 manufactured. Rifle features a matte black finish, an approximately 19-1/2" barrel, fixed large blade front sight, elevation adjustable rear sporting sight, composite trigger guard, serrated charging handle, serrated curved trigger, accepts detachable magazines, serrated magazine release behind magazine well, and a serrated sliding manual safety mounted on top of the wrist. The composite furniture consists of a semi-pistol gripped shoulder stock with checkering at the wrist, checkered finger grooved forend with white diamonds on both sides, black forend tip with a white spacer, black composite grip cap with an embossed Model call-out and white spacer, and a black serrated composite butt plate with a white spacer. The original matte black finish retained is approximately 96% with very light scratches on the barrel, some edge wear, and very minor handling blemishes. Metal displays no deformation, but there is very sparse oxidative speckling on the barrel. Action is smooth and crisp, and the bore is bright with strong rifling. The furniture polymer is in very good condition with minor handling marks, and small material transfers. Rifle includes one magazine total. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

Brazilian made semi-automatic centerfire compact pistol chambered for 9x19mm Luger. This is a single-action pistol with restrike capabilities, and the factory inventory number is '1-G3C939.' Pistol features a matte stainless steel slide finish, a 3.2" stainless steel barrel with loaded chamber viewing port, front and rear cocking serrations, serrated slide stop, a fixed blade front sight with a white dot, dovetailed serrated square notched rear sight, partially serrated curved trigger with an integral blade safety, full-length metal guide rod assembly with dual recoil springs, serrated frame mounted manual safety, reversible serrated push-button magazine release, integral picatinny accessory rail on dust cover, and a stippled black polymer frame with Taurus logos. The original matte stainless finish retained is approximately 99% with superficial scratches. Metal displays no rust or deformation. The action is smooth and crisp, and the black polymer frame is in excellent condition with nothing remarkable. The bore is bright with strong rifling. The G3c also includes three twelve-round OEM magazines total, original factory cardboard box, cable lock, and instruction manual . Condition is NRA Excellent. ***Modern Firearm***

This lot includes a Leupold Wind River Sequoia variable powered 15-45x60mm spotting scope. Scope features a foam-lined black diamond plated hard case with key, 100% waterproof, 16.5-13mm eye relief, heavy-duty neoprene protective cover, durable rubber armor coating, lens cloth, and a tripod. The tripod features a multi-directional tilting head, multi-section adjustable legs, and non-slip rubber feet. The scope's sight picture is bright and clear, and the external condition is excellent with only superficial handling blemishes.

American made stainless steel compact slide intended for the Sig Sauer P320. Slide features a matte black Nitron finish, bull-nosed front with front and rear cocking serrations, dovetailed tritium blade front sight with a white outline, dovetailed square notched tritium rear sight, and a smooth metal slide plate. Pistol does not include barrel, or recoil assembly. The original matte black Nitron finish retained is approximately 99% with only superficial blemishes. The night sights still glow brightly. The slide was previously marked for .40S&W. The overall condition is excellent.

Size 4-1/2. The stone is an oval cabochon Catalan deep red.

American made modular striker-fired semi-automatic sub-compact pistol chambered in 9x19mm Luger, and rated for +P loads. Manufactured in Newington, NH circa 2023. Pistol features a black Nitron finished stainless steel slide, 3.1" barrel with loaded chamber viewing port, front and rear slide cocking serrations, metal guide rod assembly with captured dual recoil springs, tritium dovetailed X-RAY3 three-dot day/night sights (glow brightly), accessory rail on dust cover, optics cut slide with slide plate, smooth curved trigger, push-button magazine release, stainless steel insert (the frame or firearm in modular pistols), and stippled black polymer grip module with undercut trigger guard. Pistol retains approximately 99% of its original Nitron finish with nothing remarkable. Metal displays no rust, or deformation. The action is smooth and crisp, and the bore is bright with strong rifling. The polymer grip module is also in excellent condition. Pistol includes the original factory black plastic hard case with matching end label, documents, sticker, two 10-round OEM magazines total, and cable lock. Condition is NRA Excellent - Like New. ***Modern Firearm***

American made direct gas impingement semi-automatic modern sporting carbine chambered for 5.56x45mm NATO, and manufactured in Summerville, SC. Carbine features a matte green upper and lower polymer receivers, picatinny flat-top upper receiver, an approximately 16" medium profile barrel with a 1/8 twist rate, A2 style flash hider, no installed iron sights, smooth curved single-stage trigger, oversized integral trigger guard, carbine length gas system, 15" T-marked free-float aluminum M-Lok handguards with a picatinny accessory top rail, low profile gas block, annular cut bolt assist, shell deflector, spring loaded dust cover, annular cut push-button magazine release, flared magazine well, smooth receiver mounted manual safety, black checkered A2 style pistol grip, six-position Mil-Spec receiver extension, telescoping M4 style shoulder stock with a sling swivel, M16 style bolt carrier with a staked gas key and side venting gas ports, Mil-Spec buffer and spring, Mil-Spec charging handle, and an end plate with dual sling loops. The original matte black finish retained is approximately 99% with nothing remarkable. The original green polymer receiver condition retained is approximately 99% with little to speak of. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. Carbine includes one magazine total. Condition is NRA Excellent-Like New. ***Modern Firearm***

American made semi-automatic striker fired centerfire pistol chambered for 9x19mm Luger, and manufactured circa 2025 in Prescott, AZ. This pistol is a Glock 19 Generation 3 copy with a modular grip, and its SKU is '19400.' Pistol features a two-toned finish with a matte black FNC Nitride finished slide and a 'Stealth Gray' grip module, front and rear slide serrations, optics cut slide, an approximately 4" barrel, suppressor height fixed blade tritium front sight with a white outline, dovetailed suppressor height serrated square notched rear sight, full-length guide metal guide rod assembly with a flat recoil spring, smooth nearly flat faced trigger with an integral blade safety (safe-action type), fully granular textured 'Stealth Gray' polymer grip module, beveled magazine well, undercut trigger guard, picatinny accessory rail on the dust cover, serrated slide stop, and serrated push-button magazine release. The original matte black FNC Nitride finish retained is approximately 99% with nothing remarkable. Metal displays no rust, or deformation. Bore is bright with strong rifling, and the action is smooth and crisp. The grip module polymer is in excellent condition with little to speak of. Pistol includes the original factory black plastic foam lined hard case, two 15-round magazines total, optic mounting wrench and hardware, paperwork, cable lock, and stickers. Condition is NRA Excellent. ***Modern Firearm***

American made complete full-sized slide assembly intended for the Sig Sauer P320. Slide features a matte black Nitron finish, bull-nosed front with front and rear cocking serrations, full-length metal guide rod assembly with a flat recoil spring, 4.7" carbon steel barrel chambered for 9x19mm Luger, dovetailed tritium blade front sight with a white outline, dovetailed square notched tritium rear sight with white outlines, and a smooth metal slide plate. The original matte black Nitron finish retained is approximately 99% with only superficial blemishes. Bore is bright with strong rifling. The night sights still glow brightly. The overall condition is excellent.

American made direct gas impingement semi-automatic modern sporting carbine chambered for .300 Blackout, and manufactured in Summerville, SC. Carbine features a matte black upper and lower polymer receivers, picatinny flat-top upper receiver, an approximately 16" medium profile barrel with a 1/8 twist rate, A2 style flash hider (no timed correctly), no installed iron sights, smooth curved single-stage trigger, oversized integral trigger guard, pistol length gas system, 10" T-marked free-float aluminum M-Lok handguards with a picatinny accessory top rail, low profile gas block, annular cut bolt assist, shell deflector, spring loaded dust cover, annular cut push-button magazine release, flared magazine well, smooth receiver mounted manual safety, black checkered A2 style pistol grip, six-position Mil-Spec receiver extension, telescoping shoulder stock with quick detach sockets and a solid rubber recoil pad, M16 style bolt carrier with a staked gas key and side venting gas ports, Mil-Spec buffer and spring, Mil-Spec charging handle, and an end plate with dual sling loops. A Crimson Trace red dot optic is mounted using a riser mount. The original matte black finish retained is approximately 99% with nothing remarkable. The original black receiver polymer condition retained is approximately 99% with only superficial handling blemishes. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. Flash suppressor is loose. Carbine includes one magazine total. Condition is NRA Excellent-Like New. ***Modern Firearm***

American made direct impingement semi-automatic centerfire modern sporting rifle chambered for 5.56x45mm NATO, and manufactured in Stafford, TX. Rifle features a matte black Type III anodized finish, 7075-T6 forged aluminum upper and lower receivers, flat top picatinny upper receiver, a 16" SOCOM profile 4140 Chrome Moly Vanadium barrel (Melonite finish), M4 feed ramps, 1/2"-28 muzzle threads with a A2 style flash suppressor, low-profile gas block, SHR 15" M-Lok free float handguard with top picatinny optics rail, short picatinny rail sections on both sides and the bottom of the handguard, two quick disconnect (QD) sockets on the handguard, no iron sights installed, shell deflector, annular cut bolt assist, annular cut push-button magazine release, serrated paddle bolt release, flared magazine well, serrated ambidextrous receiver mounted manual safety, smooth curved single-stage trigger, Mil-Spec trigger guard, spring loaded dust cover, Mil-Spec charging handle, black B5 Systems pistol grip, M16 style bolt carrier with side venting ports, staked gas key, Mil-Spec buffer and spring, six position Mil-Spec receiver extension, and a B5 Systems stock with two QD sockets and a black rubber recoil pad. The matte black finish retained is approximately 98% with light scratches on the receiver, and extremely minor edge wear. Metal displays no rust, and no deformation. Action is smooth and crisp, and the bore is bright with strong rifling. Furniture polymer is in excellent condition with nothing remarkable. Rifle includes one magazine total. Condition is NRA Excellent. ***Modern Firearm***

American made complete compact slide assembly intended for the Sig Sauer P320. Slide features a matte black Nitron finish, bull-nosed front with front and rear cocking serrations, full-length metal guide rod assembly with dual captured recoil spring, threaded 4.6" carbon steel barrel chambered for 9x19mm Luger, 1/2"-28 muzzle threads without a thread protector, dovetailed tritium blade front sight with a white outline, dovetailed square notched tritium rear sight with white outlines, and a smooth metal slide plate. The original matte black Nitron finish retained is approximately 98% with minimal edge wear, and light blemishes. The bore is bright with strong rifling. The night sights still glow brightly. The overall condition is excellent.

American made semi-automatic striker fired centerfire pistol chambered in .40 Smith & Wesson, and manufactured in Springfield, MA. This model's SKU is '11676.' Pistol features a matte black Armornite finished stainless steel slide, a 4" stainless steel barrel with loaded chamber view port, dovetailed Tritium front sight with white outline, dovetailed tritium square notched rear sight, frame reinforced with a rigid stainless steel chassis, full-length metal guide rod with a flat recoil spring, smooth curved segmented safety trigger, no external thumb safety, serrated take-down lever, serrated slide stop, a high-strength black polymer frame with granular texturing on the grip, picatinny accessory rail on dust cover, slightly under cut trigger guard, reversible granular textured magazine release on the left side of the frame, and interchangeable textured backstraps. The original black Armornite finish retained is approximately 99% with nothing remarkable. Metal displays no rust, or deformation. Bore is bright with strong rifling, and the action is smooth and crisp. The frame polymer is in excellent condition with little to speak of. Pistol includes the original factory black plastic foam lined hard case, instruction manual, three 13-round factory magazines total, magazine parts, and three interchangeable backstraps. Condition is NRA Excellent. ***Modern Firearm***

American made semi-automatic long-stroke piston operated Kalashnikov type rifle chambered for 7.62x39mm ammunition, and manufactured in West Columbia, SC. This is Palmetto's GF3 line of AK style rifles with an integral folding triangle stock. Rifle features a matte black receiver finish, 4150 steel nitride barrel with a 1:9 twist rate, stamped 1mm receiver with 'X/Y' axis pin markings, smooth curved single-stage and single hook trigger, fully adjustable protected post front sight, elevation adjustable tangent rear sight graduated to 800 yards, ribbed dust cover, manual safety lever mounted on the right side of the receiver, slant style muzzle brake, gas block with bayonet lug, smooth charging handle, paddle magazine release mounted at the magazine well, and a optic mounting rail on the receiver's left side. The plum polymer furniture consists of a checkered pistol grip, metal triangular folding shoulder stock with a sling loop on the right side, bulged ribbed forend, sling loop on the forend retainer, and a smooth handguard. The left of the front trunnion is marked 'GF3' with a partial serial number. The right side of the receiver has 'S, A, and F' selector markings. The original matte black finish retained is approximately 99% with a safety drag line, minor edge wear, and superficial handling marks. Metal displays no deformation, or rust. Rivets are pressed flat and domed. Action is smooth and crisp, and the bore is bright with strong rifling. Furniture polymer is in excellent condition with nothing remarkable. No magazine provided. Condition is NRA Excellent. ***Modern Firearm***

This lot includes seventeen bladed items and three sheaths. The knives consist of a 1) Spyderco 'Efficient Folding Knife' with a 2.99" 8Cr13MoV Steel Blade, G-10 Handle, LinerLock, and a full-flat grind. 2) Sencut 'Neches Flipper Knife' with a Micarta handle, and a 3.2" 10Cr15CoMoV blade. 3) Cold Steel 'Mini Tuff Lite' folder with a sheepsfoot 2" 416 stainless steel wide hollow ground blade, pocket clip, lanyard slot, Tri-Ad lock, and a blue Griv-Ex polymer handle. 4) Friedr, Herder Abr. Sonn 'Italian Electrician' folding knife with a Sapelli wood handle, 3" stainless steel blade, and is hand-crafted in Italy. The rest of the lot includes three sheaths, one Leatherman with a leather sheath, and twelve folding pocket knives (one with a nylon sheath). Some of the brands include Ozark Trails, Smith & Wesson, and others.

This lot includes a DPMS Sportical upper receiver. The upper package consists of a 16" barrel with a 1:9 twist rate, 5.56x45mm NATO chamber and a pencil barrel profile, extruded 7029-T6 aircraft grade aluminum slick-side receiver, picatinny optics rail on the top of the receiver, A2 style bird cage flash suppressor, picatinny railed gas block, two-piece ribbed black polymer handguards,and a carbine length gas system, The original matte black finish retained is approximately 99% with only superficial blemishes. The bore is bright with strong rifling. The overall condition is excellent, and is like new. Upper does not include a bolt carrier group, sights/optics, or charging handle.

American made micro-compact semi-automatic striker-fired pistol chambered for .45 Automatic Colt Pistol, and manufactured in Springfield, MA. This pistol model (11726) has been discontinued by the manufacturer. Pistol features a stainless steel slide with a matte black Armornite finish, a 3.3" stainless steel Armornite finished barrel with loaded chamber view port, tritium dovetailed blade front sight with orange outline, tritium dovetailed square notched rear sight, front and rear scalloped slide serrations, full-length metal guide rod assembly with dual recoil springs, smooth curved two-piece trigger safety trigger, granular textured polymer frame with S&W M&P logos on both sides, slightly undercut trigger guard, granular textured push-button magazine release, serrated slide stop, and serrated take-down lever. The original Armornite finish retained is approximately 99% with little to speak of. Metal display no rust, or deformation. The action is smooth and crisp, and the bore is bright with strong rifling. Frame polymer is in excellent condition with nothing remarkable. Pistol includes the original factory cardboard box with end label, some paperwork, three 7-round OEM magazines total, and a cable lock. Condition is NRA Excellent - Like New ***Modern Firearm***

This lot includes a complete AR-15 upper receiver chambered for 6.5mm Grendel. This package includes a matte black anodized finish, flat-top upper receiver with a picatinny optics rail, a threaded 20" stainless steel barrel and a 1:8" twist rate, 15" aluminum M-Lok free-float handguard with a picatinny top rail, four quick-detach sockets on both sides of the front and rear on the handguard, a spiral slotted stainless steel flash suppressor, standard charging handle, M16 style bolt carrier with a staked gas key, spring loaded dust cover, shell deflector, annular cut bolt assist. The matte black anodized finish retained is approximately 99% with a few light handling blemishes. Metal displays no rust, or deformation. The bore is bright with strong rifling. The overall condition is excellent - Like New.

Austrian made sub-compact safe-action semi-automatic pistol chambered in 10mm Auto. The G29 SKU is 'UG2950201.' Pistol features a matte black finished slide (likely nDLC finish), bull-nosed slide, 3.78" matte black hammer forged barrel (likely nDLC finish), fixed blade front sight with a white dot, dovetailed square notched rear sight with a white outline, full-length guide rod assembly with dual recoil springs, serrated curved trigger with passive 'Safe-Action' blade safety, serrated reversible push-button magazine release, serrated slide stop, undercut trigger guard, picatinny accessory rail on dust cover, interchangeable backstraps, and a black polymer frame with square texturing and finger grooved grip. The original matte black nDLC finish retained is approximately 99% with nothing remarkable. Metal displays no rust, or deformation. Bore is bright with strong rifling, and the action is smooth and crisp. The frame polymer is in excellent condition with little to speak of. Pistol includes the original factory black plastic foam lined hard case, three 10-round OEM magazines total, manual, cable lock, two extra backstraps with tool, cleaning tools, and magazine speed loader. Condition is NRA Excellent - Like New. ***Modern Firearm***

'Warthog', a Turkish made semi-automatic shotgun chambered for 3" 12 Gauge shells, and imported by Legacy Sports Reno, NV. This Warthog model utilizes a standard rifle/shotgun type of stock, and is considered the 'Standard' version as opposed to the 'Tactical' Version. Shotgun features a matte black finish, aluminum receiver, an approximately 20" chromed lined round barrel, accepts choke tubes, installed choke is 'Modified', fixed blade front sight, serrated charging handle with a rubber handle cover, smooth curved trigger, plastic trigger guard, serrated push-button manual safety on trigger guard, smooth round bolt release on the right side of the receiver, 4-round magazine tube, serrated magazine tube cap, and a manual bolt stop lever on the left side of the trigger guard. The black polymer furniture consists of a semi-pistol gripped shoulder stock with checkering at the wrist, checkered finger grooved forend, bottom of the grip is checkered, and a ventilated rubber recoil pad. The markings on the receiver show the 'Citadel' trademark on the right side, and the Warthog logo on the left side of the receiver. The original matte black finish retained is approximately 96% with a material transfer on the barrel, and light blemishes on the barrel and receiver that do not expose bare metal. Metal displays no rust, or deformation. The action is smooth and crisp, and the bore is dirty, but looks to be in excellent condition. Furniture polymer is in excellent condition with nothing remarkable. Condition is NRA Near Excellent. ***Modern Firearm***

'Speedmaster', an American made tube-fed semi-automatic rimfire rifle chambered for .22 Short, Long, and Long Rifle. This is a highly modified Model 552 with new furniture, and finish. Manufactured circa 1964 in Ilion, NY. The Model 552 was in production from 1957 until 2020. Rifle features a tan Cerakote type refinish on the steel parts, black colored finish on aluminum parts, dovetail optics rail on top of the receiver, 21" round barrel, large blade front sight with a silver-toned bead, elevation and windage adjustable rear sight, smooth curved trigger with beveled edges, left side charging handle, full-length tube magazine under barrel, shell deflector, annular cut manual push-button safety on trigger guard. The Boyd's brown laminate furniture consists of a smooth thumbhole shoulder stock, smooth laminate forend (fits loose), right-hand cheek piece, sling stud on the bottom of the shoulder stock, and a ventilated black rubber recoil pad with a black spacer. The tan Cerakote finish retained is approximately 97% with light scratches on the magazine tube, and very sparse edge wear. Metal displays no rust, or deformation. Furniture wood is in very good condition with a few light impressions, small material transfers, and the handguard does not fit well. Action is smooth and crisp, and the bore is bright with strong rifling. Condition is NRA Very Good. ***Modern Firearm - C&R Eligible***

This lot includes a complete AR-15 upper receiver chambered for .350 Legend. This package includes a matte black anodized finish, flat-top upper receiver with a picatinny optics rail, a threaded 16" matte black barrel, 15" aluminum M-Lok free-float handguard with a picatinny top rail, a ported and crowned muzzle brake, standard charging handle, lwo- profile gas block, M16 style bolt carrier with a staked gas key, spring loaded dust cover, shell deflector, and an annular cut bolt assist. The matte black anodized finish retained is approximately 96% with a few light handling blemishes, and edge wear. Metal displays no deformation, but there was a light spot of oxidation on the top of the barrel. The bore is bright with strong rifling. The overall condition is good.

American made take-down pump-action centerfire rifle chambered for .30 Remington, and manufactured circa 1935 in Ilion, NY. The models 141 and 141A were produced between 1935 and 1950. Approximately 2,000 Model 141 rifles were made in 1935 with 22" barrels. Rifle features blued finish, 22" tapered barrel, dovetailed blade front sight with a silver colored bead, elevation adjustable sporting rear sight, about half-length fluted tube magazine, annular cut trigger guard mounted push-button safety, push-button bolt release mounted on the side of the bolt, smooth curved trigger, and a knurled take-down knob mounted on the left side of the receiver. The hardwood furniture consists of a smooth semi-pistol gripped shoulder stock, corn-cob style pump handle, and checkered factory metal butt plate. A brass cartridge head medallion decorates the left side of the receiver. The original blued finish retained is approximately 85% with edge wear, light thinning on the receiver, contact wear from the slide handle, and the finish taking on a brown patina. Metal displays a deformed screw on the right side of the slide handle, and some light oxidative speckling. Furniture wood is in fair to good condition with a crack on the front of the slide handle, and the wood is chamfered out around the right side screw. The action is smooth and crisp, and the bore is bright with strong rifling. Condition is NRA Near Good. ***Modern Firearm - C&R Eligible***

American made semi-automatic striker fired centerfire pistol chambered in 10mm Auto, and manufactured in Springfield, MA. This model's SKU is '13389.' Pistol features a matte black Armornite finished stainless steel slide, optic cut slide, front and rear scalloped slide serrations, a 4" stainless steel barrel with loaded chamber view port, suppressor height dovetailed blade front sight with white dot, suppressor height dovetailed square notched rear sight with two white dots, frame reinforced with a rigid stainless steel chassis, full-length metal guide rod with a flat recoil spring, smooth flat faced trigger with integral blade safety, no external thumb safety, serrated take-down lever, ambidextrous serrated slide stop, a high-strength black polymer frame with granular texturing on the grip, picatinny accessory rail on dust cover, slightly under cut trigger guard, reversible granular textured magazine release on the left side of the frame, and interchangeable textured backstraps. The original black Armornite finish retained is approximately 99% with nothing remarkable. Metal displays no rust, or deformation. Bore is bright with strong rifling, and the action is smooth and crisp. The frame polymer is in excellent condition with little to speak of. Pistol includes the original factory cardboard box, two 15-round factory magazines total, optic mounting hardware, and three interchangeable backstraps. Condition is NRA Excellent. ***Modern Firearm***

#545-h23yd-831 Turkish made gas-operated magazine fed semi-automatic AR style shotgun chambered for 3" 12 Gauge shells, and imported by GForce Arms Reno, NV. Shotgun features a Tactical Gray finish, flat-top picatinny upper receiver, approximately 20" barrel with external threads, hexagonal square ported barrel shroud, fixed choke measures 'Cylinder' with a drop-in gauge, fully adjustable polymer back-up iron sights, approximately 13" aluminum handguard with a top picatinny accessory rail, short picatinny accessory segments on both sides and the bottom of the handguard, accepts detachable MKA1919 magazines, smooth curved trigger, serrated paddle bolt release, serrated lower receiver mounted manual safety, checkered push-button magazine release, collard charging handle, sling swivel at the serrated magazine tube cap, and a serrated disassembly lever at the front of the receiver. The polymer furniture consists of a black rubber over molded finger grooved pistol grip, and a fixed shoulder stock with an adjustable cheek weld and black rubber recoil pad. It also looks like there are circular sling attachment sockets on the rear of the shoulder stock that may need hardware to use. A MCG Tactical red dot optic (red/green dot) is attached using a high rise mount. The original Tactical Gray finish retained is approximately 98% with superficial scratches, a small amount of edge wear, and minor handling blemishes. Metal displays no rust, and no deformation. Action is smooth and crisp, and the bore is bright and smooth. Furniture polymer is in excellent condition with little to speak of. The red dot optic seems to work well. It is suggested to use 1400 FPS or higher ammunition during the break-in period. Shotgun includes two magazines total. Condition is NRA Excellent. ***Modern Firearm***

American made lever-action centerfire rifle chambered for .35 Winchester Center Fire ammunition, and manufactured circa 1911 in New Haven, CT. This was the first Winchester rifle to feature a box magazine, allowing the rifle to chamber both military and hunting cartridges. The 1895 was the last lever-action rifle designed by John Browning. It boasts a rear locking bolt, and is considered the strongest lever-action rifle that Winchester ever produced. The Winchester 1895 was the choice of the Arizona rangers as noted in all their historical articles. Rifle features a blued refinish, an approximately 24" tapered barrel, dovetailed blade front sight with a white bead, fully adjustable vernier Lyman rear peep sight, slot blank installed in rear sight dovetail, smooth curved trigger, external hammer with a checkered spur, and a 5-round fixed box magazine. The walnut furniture consists of a smooth straight gripped shoulder stock, smooth Schnabel forend with a black tip, and a smooth crescent steel butt plate. The blued refinish retained is approximately 98% with some muzzle wear. Metal displays some pitting from before the rifle was refinished, slight screw slot deformation, some damage by the top tang's screw hole, and some oxidation on the Lyman sight. The bore is bright with strong rifling, and the action is smooth and crisp. The furniture wood is in very good to excellent condition with a few handling blemishes on the left side of the forend. Condition is NRA Very Good. ***Modern Firearm - C&R Eligible***

Rough textured "field" finished in OD paint. Complete with leather lining and tan web chinstrap. Leather is a little dry but all there. "4B" steel batch code stamped on the underside of visor. Very Good Condition.

#witk45871ymsxp 'Defender', a Turkish made tube fed inertia assisted pump-action shotgun chambered for 3" 12 Gauge shells, and imported by Browning Arms Company Morgan, UT. The Winchester SXP Defender was introduced in 2009, and produced under Browning and Herstal licensing. Shotgun features a matte black finish, aluminum receiver drilled and tapped for optic mounting, a 18" chrome-lined round barrel, brass bead front sight, fixed choke measures 'Cylinder' with a drop-in gauge, 4-lug rotary bolt, smooth curved trigger, annular cut push-button safety mounted on trigger guard, smooth bolt release lever mounted at the rear of the trigger guard, polymer trigger guard, dual action bars, grooved magazine tube cap with a sling stud, and a 5-round tube magazine capacity (2-3/4" shells). The black synthetic furniture consists of a semi-pistol gripped shoulder stock with granular texturing at the wrist, small Winchester trademarks on both sides of the grip, red Winchester 'W' on the grip cap, corn-cob style pump handle, sling stud on the bottom of the shoulder stock, 13-5/8" length-of-pull, and a black solid rubber recoil pad. The original matte black finish retained is approximately 98& with light scratches on the barrel, and minor handling blemishes on the receiver. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is smooth and bright. The polymer furniture is in excellent condition with only superficial handling marks. Condition is NRA Excellent. ***Modern Firearm***

Turkish made full-sized semi-automatic striker fired pistol chambered for 9x19mm Luger, and imported by European American Armory out of Cocoa, FL. The MC28 SA line of pistols was introduced in 2014, and the MC28 SA-T is a budget friendly optics package offering. Pistol features a two-toned finish with a gray slide and a matte black polymer frame, ported slide with front and rear serrations, a 4-1/4" barrel with a target crown, fixed blade front sight with a white dot, optics cut slide with an unmarked red dot sight installed, smooth curved trigger with a passive blade safety, picatinny style accessory rail on the dust cover, loaded chamber view port, reversible serrated push-button magazine release, serrated take-down lever, serrated slide stop, full-length metal guide rod with a flat recoil spring, granular textured grip panels with interchangeable inserts, and an undercut trigger guard. The original gray metal finish retained is approximately 99% with nothing remarkable. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. Frame polymer is in excellent condition with little to speak of. The red dot optic functions well. Pistol includes the original blue factory foam lined hard case, instruction manual, metal slide cover with a square notched white dot rear sight, two-extra grip inserts, tools, a coin, one 14-round magazine total, and a lens cloth. Condition is NRA Excellent. ***Modern Firearm***

Three American made stripped AR-15 receivers are as follows. 1) Davidson Defense DD-15 #A00510b is a forged 7075-T6 aluminum receiver with an open trigger guard, matte black Type III Hard-Coat anodized finish, 'Fire' and 'Safe' markings on both sides, accepts standard AR-15 parts, fully fenced, and a beveled magazine well. The original matte black receiver finish retained is approximately 99% with only superficial handling blemishes. 2) Davidson Defense DD-15 #A005123 is a forged 7075-T6 aluminum receiver with an open trigger guard, matte black Type III Hard-Coat anodized finish, 'Fire' and 'Safe' markings on both sides, accepts standard AR-15 parts, fully fenced, and a beveled magazine well. The original matte black receiver finish retained is approximately 99% with only superficial handling blemishes. 3) Anderson Mfg. AM-15 #23055725 is a forged 7075-T6 aluminum receiver with an open trigger guard, matte black Hard-Coat anodized finish, 'Fire' and 'Safe' markings on the left side, accepts standard AR-15 parts, fully fenced, and a beveled magazine well. The original matte black receiver finish retained is approximately 99% with very minor handling blemishes, and a residue on the left side of the magazine well. Condition is NRA Excellent. ***Modern Firearm***

American made tube-fed semi-automatic rimfire rifle chambered for .22 Long Rifle, and manufactured circa 1955 - 1962. Rifle features a blued finish, dovetailed receiver for optic mounting, an approximately 22" tapered barrel, dovetailed blade front sight with a silver-toned bead, elevation adjustable sporting rear sight, serrated right receiver mounted manual safety, nearly full-length tube magazine under barrel, smooth curved trigger, plastic trigger guard, and a knurled and collard left side charging handle. The refinished hardwood furniture consists of a smooth semi-pistol gripped shoulder stock, smooth forend, and a checkered black plastic butt plate. The original blued finish retained is approximately 85% with a few light handling blemishes, light edge wear, and a general fading to a mottled brown patina (fading mostly on the receiver). Metal displays no rust, but there are some light dings on the magazine tube. Action is smooth and crisp. The bore is bright with decent rifling, but it shows a ring inside the bore suggesting a squib load (a bulge can be felt externally). The furniture wood is in good condition with a few scrapes and light impressions. Condition is NRA Poor. ***Modern Firearm - C&R Eligible***

American made direct impingement semi-automatic centerfire modern sporting rifle chambered for 5.56x45mm NATO, and manufactured in Summerville, SC. Rifle features a matte black finish, forged aluminum upper and lower receivers, flat top picatinny upper receiver, a 16" medium profile barrel with a 1/8 twist rate (black phosphate finish), M4 feed ramps, 1/2"-28 muzzle threads with a A2 style flash suppressor, low-profile gas block, T-marked 15" M-Lok free float handguard with top picatinny optics rail, Magpul style bipod mounted to the handguard, no iron sights installed, shell deflector, annular cut bolt assist, annular cut push-button magazine release, serrated paddle bolt release, flared magazine well, serrated receiver mounted manual safety, smooth curved single-stage trigger, Mil-Spec trigger guard, spring loaded dust cover, Mil-Spec charging handle, black A2 style checkered finger grooved pistol grip, M16 style bolt carrier with side venting ports, staked gas key, Mil-Spec buffer and spring, six position Mil-Spec receiver extension, and an adjustable stock with two QD sockets and a black rubber recoil pad. The matte black finish retained is approximately 99% with nothing remarkable. Metal displays no rust, and no deformation. Action is smooth and crisp, and the bore is bright with strong rifling. Furniture polymer is in excellent condition with nothing remarkable. Take-down pin needs encouragement with a tool to open action. Rifle includes no magazines. Condition is NRA Excellent. ***Modern Firearm***

Turkish made tube-fed pump-action shotgun chambered for 3" 12 Gauge shells, and imported by Dickinson LLC. Moorpark, CA. Shotgun features silver Marinecote finish, aluminum receiver with a picatinny optics rail attached, a 20" round barrel, barrel accepts Mobil choke tubes, knurled saw-toothed radial door breaching muzzle brake, slotted heat shield, protected red Hi-Viz fiber optic front sight, protected fully adjustable ghost ring rear sight, small square textured bolt release mounted in front of the trigger guard, polymer trigger guard, smooth triangular push-button manual safety mounted on the trigger guard, 5-round tube magazine, grooved magazine tube cap with a sling stud, and a smooth curved silver-toned trigger. The black polymer furniture consists of a rubber over-molded finger grooved pistol grip, fixed polymer shoulder stock with a shell holder and sling stud, finger grooved ribbed slide handle with a bottom picatinny accessory rail, 14-3/4" length-of-pull, and a solid black rubber ribbed recoil pad. The original Marinecote finish retained is approximately 97% with light handling blemishes, small material transfers on the receiver and barrel, and some extremely minor edge wear. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is smooth and bright. The furniture polymer is in excellent condition with superficial handling marks. Condition is NRA Near Excellent. ***Modern Firearm***

#tg019-21a02959 Turkish made semi-automatic striker fired pistol chambered for 9x19mm Luger, and imported by Buffalo Cartridge Company out of Findlay, OH. The BRG9 Elite was introduced at SHOT Show 2022. Pistol features a matte black finish, front and rear slide serrations, a 4" 4340 forged steel barrel, dovetailed blade front sight with an orange dot, dovetailed square notched rear sight with two white dots, smooth flat faced trigger with a passive blade safety, full-length metal guide rod assembly with dual recoil springs, serrated take-down lever, serrated oversized slide stop, ambidextrous annular cut push-button magazine release, matte black polymer frame with granular textured side panels, interchangeable pebble textured backstraps, pebble textured finger grooved front strap, beveled magazine well, serrated front trigger guard, undercut trigger guard, smooth grip safety, striker status indicator on slide plate, loaded chamber indicator, and an accessory rail on the dust cover. The original matte black finish retained is approximately 99% with superficial handling marks. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. Frame polymer is in excellent condition with only a few very minor blemishes. Pistol includes the original foam lined black plastic hard case with label, two 16-round magazines, magazine loader, trigger lock, two extra back straps, and a cleaning kit. Condition is NRA Excellent. ***Modern Firearm***

Turkish made semi-automatic blow-back pistol caliber carbine chambered for .45 Automatic Colt Pistol, and was introduced in 2021. This is a Tisas ZIG M45 1911 style pistol reconfigured with a Mech-Tech Systems Inc. Carbine Conversion Unit (CCU). Rifle features a matte black finish, an approximately 16-1/4" round stainless steel barrel, tubular upper receiver with a left side charging handle, smooth free-spinning charging handle with push-in manual bolt hold open, no provision for iron sights, integral picatinny optics rail on top of the receiver and a UTG riser extending the height, solid checkered and curved single-stage trigger, external hammer with a checkered spur, smooth front strap, serrated mainspring housing, smooth grip safety, serrated slide stop (not usable in this configuration), serrated left frame mounted manual safety, checkered push-button magazine release, and a flared magazine well. The furniture consists of a black ribbed composite forend, aggressively textured G10 tan/black two-piece grips, and a fixed M4 style buttstock with a sling swivel. An American Tactical red/green dot optic is mounted on top of the receiver. The original matte black finish retained is approximately 99% with little to speak of. The stainless steel barrel finish is approximately 99% with a few very light scratches. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. The synthetic furniture is in excellent condition with nothing remarkable. The optic works well. Carbine includes one magazine total. Condition is NRA Excellent. ***Modern Firearm***

Turkish made gas-operated semi-automatic tube fed shotgun chambered for 2-3/4" 28 Gauge shotshells. The Viper G2 is manufactured in Turkey by Armsan, and imported by TriStar out of North Kansas City, MO. It was introduced in 2012. Shotgun features a brushed silver-toned receiver finish, a 28" vent ribbed chrome lined barrel, high polish blue barrel finish, accepts Mobil choke tubes with an 'Improved Modified' choke installed, red fiber optic sight, smooth curved silver-toned trigger, polymer trigger guard, serrated charging handle, smooth bolt release button on the right side of the receiver, 1/2 length tube magazine with a 5-round capacity, grooved magazine tube cap, manual EZ-Load magazine cut-off, and an annular cut push-button safety on the trigger guard. The gloss high-grade Turkish walnut furniture consists of a semi-pistol gripped shoulder stock with checkering at the wrist, checkered forend, 14-1/2" length-of-pull, and a factory solid black rubber recoil pad with a black spacer. The original blued barrel finish retained is approximately 99% with nothing remarkable. The original receiver finish retained is approximately 99% with only superficial handling blemishes. Metal displays no rust, or deformation. The action is smooth and crisp, and the bore is bright and smooth. The furniture wood is in excellent condition with only superficial handling marks, and the recoil pad has an extremely small tear at the tip of the toe. Condition is NRA Excellent. ***Modern Firearm***

American made semi-automatic single-action rimfire pistol chambered for .22 Long Rifle, manufactured in Ontario, CA. Pistol features a nickel finish, 4.9" vent rib barrel (additional 3" vent rib barrel included), fixed serrated ramp front sight, windage adjustable rear sight, frame and slide mounted serrated manual safeties, checkered push-button magazine release, solid smooth curved trigger, external hammer with serrated spur, smooth grip straps, and two-piece checkered black plastic grips. Frame appears to be of an aluminum or zinc alloy, and the slide might be stainless steel. Pistol retains approximately 92% of its original silver colored finish with scattered light scratches, and losses on the right side of the slide. Metal displays no rust or deformation. The action is smooth and crisp. The bore is bright with strong rifling, and the 3" barrel is also bright with strong rifling. The plastic grips are in excellent condition. Pistol includes the original factory cardboard box with matching end label, two OEM magazines total, owner's manual, a Phoenix Arms trigger lock specific to this model, and 3" barrel. Condition is NRA Very Good. *** Modern Firearm ***

Three Total. 1) M1872 Belt Plate, cast brass rectangular belt plate with "U S" in oval, side loop and integral tongue were introduced in 1872. Key Indian War and Spanish-American War plate. 2) An NGP belt plate, refers to a historic National Guard of Pennsylvania (N.G.P.) cartridge belt buckle. Dates to the late 19th-century Indian Wars and Spanish-American War eras. 3) Mills 1886 pattern U.S. Army belt plate for use with the Mills web cartridge belt. H-shaped, stamped brass plate, features a raised "US" in the center. Has the two brass keepers. Late Indian Wars, Spanish-American War. All have a nice mellow patina, very good condition with no damage/dents.

Turkish made tube-fed pump-action shotgun chambered for 3" 12 Gauge shells, and imported by Dickinson LLC. Moorpark, CA. The Dickinson Tac-14-ST was introduced in 2017. Shotgun features a matte black finish, picatinny optics rail mounted on the top of the receiver, an approximately 18-1/2" round barrel, fixed choke measures 'Cylinder' with a drop-in gauge, raised protected red fiber optic front sight, fully adjustable rear aperture sight, 5-round tube magazine, dual action bars, square textured bolt release lever in front of the trigger guard, polymer trigger guard, smooth curved trigger, top receiver mounted serrated manual safety, and a grooved magazine tube cap. The black synthetic furniture consists of a black rubber over molded pistol grip, fixed shoulder stock with a solid black rubber recoil pad, adjustable cheek piece, 14" length-of-pull, and a finger grooved serrated slide handle with a bottom picatinny accessory rail. The original matte black finish retained is approximately 99% with some light scratches on the barrel, and a light scratch on the right side of the receiver. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is smooth and bright. The synthetic furniture is in excellent condition with nothing remarkable. Condition is NRA Excellent. ***Modern Firearm***

American made semi-automatic rimfire target rifle chambered in .22 Long Rifle, manufactured circa 2021 in Newport, NH. Rifle's model number is'21186', and listed as the 'Target Light'. Rifle features a matte black finish, receiver drilled and tapped for optics mounting with an optics rail attached, an approximately 16" aluminum sleeved barrel with a threaded muzzle, no thread protector, no provisions for iron sights, serrated curved BX trigger, accepts detachable rotary style magazine, extended magazine release, Ruger engraved bolt, annular cut push-button manual safety mounted on the trigger guard, and a smooth charging handle. Furniture consists of a smooth black/gray laminate thumbhole shoulder stock, ventilated smooth flat forend with a sling stud, ambidextrous cheek weld, sling stud on the bottom of the shoulder stock, and black serrated solid rubber recoil pad with a thick black spacer. An illuminated Riton X3 Tactix 1-8x24mm low powered variable optic with an OT reticle is mounted using two-piece 30mm rings. The original matte black finish retained is approximately 99% with only a few small blemishes on the barrel. Metal displays no rust or deformation. Bore is bright with strong rifling, and the action is smooth and crisp. Furniture wood is in excellent condition with superficial handling marks. Scope's sight picture is bright and clear, with illumination. Rifle includes one factory 10-rd magazine. Condition is NRA Excellent. ***Modern Firearm***

American made semi-automatic blowback pistol caliber carbine chambered for 9x19mm Luger, and manufactured in Springfield, MA. The Smith & Wesson FPC was introduced in 2023 as a folding version of a pistol caliber carbine. Carbine features a matte black aluminum finish, a 16-1/4" 4140 Chromoly barrel, 1/2"-28 muzzle threads with a knurled thread protector, 12" polymer M-Lok handguard with a top picatinny optics rail, smooth flat-faced trigger with a passive blade safety, ambidextrous charging handle on the receiver/stock tube (doubles as locking latch when folded), granular textured cross-bolt safety above trigger guard, granular textured pistol grip with an interchangeable panel, reversible granular texture push-button magazine release, serrated ambidextrous bolt stop, black polymer receiver housing, a fixed polymer stock with a quick detach socket on the bottom, and the stock stores two magazines. A Primary Arms SLX MD-25 red dot is mounted using an aluminum mount. The original matte black finish retained is approximately 99% with nothing remarkable. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. The furniture is in excellent condition with only superficial handling marks. The red dot optic works well. Carbine includes three magazines total. Condition is NRA Excellent. ***Modern Firearm***

American made AR-10 style lowers using the advanced aerospace manufacturing technology to produce 7075-T6 forged aluminum lower receivers. Manufactured in West Columbia, SC. These receivers are marked with 'G3-10,' and the other is marked with 'G3-65.' The finish is black hard coat anodized per Mil-8625 Type 3 class 2. These receivers are stripped with no parts in them. 1) PSA, G3-65, #G36501627 has a retained finish of 98% with edge wear on the trigger guard and superficial scratches. It is marked with the PSA logo above the serial number, '6.5 CREEDMOOR,' and has an integral trigger guard. It is also marked 'SAFE,' and 'FIRE.' 2) PSA, G3-10, #G330988 has a retained finish of 98% with a few small spots of scattered edge blemishes. It is marked with the PSA trademark above the serial number, 'MULTI,' and has an integral trigger guard. It is also marked 'SAFE,' and 'FIRE.' Condition is NRA Excellent. ***Modern Firearm***

The American made MR-15 is an AR-15 type receiver constructed of 6061-T6 aircraft grade aluminum that is finished with the proper Mil-8625 Type III class 2, hard-coat anodizing. Manufactured in Wayland, MI. The MR-15 is a billet receiver that sports a traditional open trigger guard allowing for your choice of trigger guard. They are marked with the Menke trademark, and are also marked 'SAFE' and 'SEMI' around the selector. 1) Menke, MR-15, #1097 Receiver is marked 'Multi.' 2) Menke, MR-15, #1119 Receiver is marked 'Multi.' The original matte black anodizing retained is approximately 99% (on both) with nothing remarkable. Condition is NRA Excellent. ***Modern Firearm***

Turkish made tube-fed pump-action shotgun chambered for 3" 12 Gauge shells, and imported by Dickinson LLC. Moorpark, CA. The Dickinson Tac-14-ST was introduced in 2017. Shotgun features a matte black finish, picatinny optics rail mounted on the top of the receiver, an approximately 18-1/2" round barrel, fixed choke measures 'Cylinder' with a drop-in gauge, raised protected red fiber optic front sight, fully adjustable rear aperture sight, 5-round tube magazine, dual action bars, square textured bolt release lever in front of the trigger guard, polymer trigger guard, smooth curved trigger, top receiver mounted serrated manual safety, and a grooved magazine tube cap. The black synthetic furniture consists of a black rubber over molded pistol grip, fixed shoulder stock with a solid black rubber recoil pad, adjustable cheek piece, 14" length-of-pull, and a finger grooved serrated slide handle with a bottom picatinny accessory rail. The original matte black finish retained is approximately 99% with a light mark on the left side of the receiver, superficial marks on the barrel, and the slightest amount of edge wear. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is smooth and bright. The synthetic furniture is in excellent condition with nothing remarkable. Condition is NRA Excellent. ***Modern Firearm***

American made semi-automatic striker-fired compact rimfire pistol chambered for .22 Long Rifle, and manufactured in Cocoa, FL. The P17 was introduced in 2017. Pistol features a matte black polymer construction, matte black metal finish, a 3.8" threaded barrel, green fiber optic front sight, serrated elevation adjustable rear sight, 3-pound serrated curved trigger, recoil spring around barrel, serrated ambidextrous frame mounted safety, serrated slide stop, ambidextrous serrated paddle style magazine release on trigger guard, black polymer frame with a square textured grip, square textured front trigger guard, and a picatinny-style accessory rail on dust cover. The original matte black finish retained is approximately 99% with little to speak of. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. Frame polymer is in excellent condition with nothing remarkable. Pistol includes the original black foam-lined hard case, trigger lock, manual, stickers, three 17-round magazines total, hex key, thread protector removal/installation tool, and a thread adapter. Condition is NRA Excellent. ***Modern Firearm***

The 'Elite,' a high quality American made Glock compatible full-size striker fired pistol chambered for 9x19mm. Manufactured in Plano, TX. Over the standard G17 Glock, this pistol incorporates many desirable custom features directly from the factory. Pistol features a matte black nitride finish, bronze 4.5" fluted barrel, Ameriglo tritium front sight with a bright yellow outline, serrated square notched rear sights, front and rear slide cocking serrations, ported slide, full-length metal guide rod with a flat recoil spring, smooth semi-flat faced trigger with integral blade safety, undercut trigger guard with stippled front, serrated push-button mag release, optics cut slide with removable plate installed, accessory rail on dust cover, replaceable back straps, and a black stippled slim contoured polymer frame. The original black nitride finish retained is approximately 99% with nothing remarkable. Metal displays no rust or deformation. Bore is bright with strong rifling, and the action smooth and crisp. The polymer frame is also excellent. Pistol includes soft case, two Magpul seventeen-round magazines, two extra back straps, lock, manual, sticker, tool, oil, Locktite, extra hardware, and factory cardboard box. Condition is NRA Excellent. *** Modern Firearm ***

Turkish made break-top single-shot shotgun chambered for 3" 12 Gauge shells, and imported by APINTL Pahrump, NV. Shotgun features a black parkerized finished barrel with a matte stainless steel receiver, an approximately 20" vent rib barrel with chrome lining, brass bead front sight, windage adjustable red 'U' notched flip sight, accepts chokes tubes, 'Improved Modified' choke installed, smooth curved trigger, trigger guard doubles as an action lever, external hammer with a serrated spur, and an extractor. The wood colored polymer furniture consists of a semi-pistol gripped shoulder stock with checkering at the wrist, checkered Schnabel forend with a sling stud, sling swivel stud on the bottom of the shoulder stock, 14-5/8" length-of-pull, and a solid black rubber recoil pad with a couple of spacers. The original black parkerized finish retained is approximately 99% with superficial handling blemishes. The matte stainless receiver finish retained is approximately 99% with nothing remarkable. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is smooth and bright. The polymer furniture is in excellent condition with little to speak of. Condition is NRA Excellent. ***Modern Firearm***

A left handed American made centerfire bolt-action rifle chambered for 7mm-08 Remington, and manufactured in Westfield, MA. Rifle features a matte blued finish, a 22" free-floated tapered barrel, receiver drilled and tapped for optic mounting, turned down bolt handle with a checkered knob, 4+1 total capacity, no provisions for iron sights, two-lug bolt with jeweled bolt body, detachable magazine, serrated sliding three-position tang safety, adjustable smooth single-stage Accu-Trigger with integral blade safety, and installed scope rail sections on the receiver. The black synthetic furniture consists of a semi-pistol grip shoulder stock with checkering at the wrist, checkered black plastic grip cap with silver Savage trademark, checkered forend with sling stud, sling stud on the bottom of the shoulder stock, and a solid black rubber recoil pad. Rifle retains approximately 98% of its original blued finish with some edge wear, and light scattered scratches. Metal displays no rust or deformation. The action is smooth and crisp, and the bore is bright with strong rifling. The polymer furniture is also very good with light scattered scratches and blemishes. Condition is NRA Very Good. ***Modern Firearm***

This lot includes a complete AR-15 upper receiver chambered for .50 Beowulf. This package includes a matte black anodized finish, flat-top upper receiver with a picatinny optics rail, a threaded 16" matte black barrel, two-piece ribbed polymer handguards with aluminum heatshields, spiral fluted flash suppressor, standard charging handle, M16 style bolt carrier with a staked gas key, spring loaded dust cover, shell deflector, and an annular cut bolt assist. The matte black anodized finish retained is approximately 97% with a few light handling blemishes, and edge wear. Metal displays no deformation, or rust. There is a waxy residue on the front of the barrel, and flash suppressor. The bore is bright with strong rifling. Upper includes one magazine total. The overall condition is very good.

Turkish made tube-fed pump-action shotgun chambered for 3" 12 Gauge shells, and imported by Dickinson LLC. Moorpark, CA. Shotgun features silver Marinecote finish, aluminum receiver with a picatinny optics rail attached, a 20" round barrel, barrel accepts Mobil choke tubes, choke measures 'Cylinder' with choke installed, slotted heat shield, protected red Hi-Viz fiber optic front sight, protected fully adjustable ghost ring rear sight, small square textured bolt release mounted in front of the trigger guard, polymer trigger guard, smooth triangular push-button manual safety mounted on the trigger guard, 5-round tube magazine, grooved magazine tube cap with a sling stud, and a smooth curved silver-toned trigger. The black polymer furniture consists of a rubber over-molded finger grooved pistol grip, fixed polymer shoulder stock with a shell holder and sling stud, finger grooved ribbed slide handle with a bottom picatinny accessory rail, 14-3/4" length-of-pull, and a solid black rubber ribbed recoil pad. The original Marinecote finish retained is approximately 98% with superficial handling blemishes. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is smooth and bright. The furniture polymer is in excellent condition with nothing remarkable. Shotgun includes an extra choke tube and wrench. Condition is NRA Excellent. ***Modern Firearm***

American made direct gas impingement semi-automatic modern sporting carbine chambered for 5.56x45mm NATO, and manufactured in Lake Havasu City, AZ. Carbine features a matte black upper and lower polymer receivers, picatinny flat-top upper receiver, an approximately 16" medium profile barrel with a 1/8 twist rate, A2 style flash hider, no installed iron sights, smooth curved single-stage trigger, oversized integral trigger guard, carbine length gas system, 10" free-float aluminum M-Lok handguards with a top picatinny accessory rail, low profile gas block, annular cut bolt assist, shell deflector, spring loaded dust cover, serrated paddle bolt release, annular cut push-button magazine release, flared magazine well, smooth receiver mounted manual safety, black checkered A2 style pistol grip, six-position Mil-Spec receiver extension, telescoping M4 style shoulder stock with a sling swivel, M16 style bolt carrier with a staked gas key and side venting gas ports, Mil-Spec buffer and spring, Mil-Spec charging handle, and an end plate with dual sling loops. The original matte black finish retained is approximately 99% with nothing remarkable. The original black polymer condition retained is approximately 99% with little to speak of. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. Carbine includes one magazine total. Condition is NRA Excellent-Like New. ***Modern Firearm***

#tg019-22c14360 Turkish made semi-automatic striker fired pistol chambered for 9x19mm Luger, and imported by Buffalo Cartridge Company out of Findlay, OH. The BRG9 Elite was introduced at SHOT Show 2022. Pistol features a matte black finish, front and rear slide serrations, a 4" 4340 forged steel barrel, dovetailed blade front sight with an orange dot, dovetailed square notched rear sight with two white dots, smooth flat faced trigger with a passive blade safety, full-length metal guide rod assembly with dual recoil springs, serrated take-down lever, serrated oversized slide stop, ambidextrous annular cut push-button magazine release, matte black polymer frame with granular textured side panels, interchangeable pebble textured backstraps, pebble textured finger grooved front strap, beveled magazine well, serrated front trigger guard, undercut trigger guard, smooth grip safety, striker status indicator on slide plate, loaded chamber indicator, and an accessory rail on the dust cover. The original matte black finish retained is approximately 99% with a small amount of losses on the front sight. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. Frame polymer is in excellent condition with a few minor blemishes. Pistol includes the original foam lined black plastic hard case with label, two 16-round magazines, magazine loader, trigger lock, two extra back straps, and a cleaning kit. Condition is NRA Excellent. ***Modern Firearm***

Turkish made full-sized semi-automatic striker fired pistol chambered for 9x19mm Luger, and imported by European American Armory out of Cocoa, FL. The MC28 SA line of pistols was introduced in 2014. Pistol features a two-toned finish with a gray slide and a matte black polymer frame, front and rear slide serrations, a 4-1/4" barrel, fixed blade front sight with a white dot, dovetailed square notched rear sight with two white dots, smooth curved trigger with a passive blade safety, picatinny style accessory rail on the dust cover, loaded chamber view port, reversible serrated push-button magazine release, serrated take-down lever, serrated slide stop, full-length metal guide rod with a flat recoil spring, granular textured grip panels with interchangeable inserts, and an undercut trigger guard. The original gray metal finish retained is approximately 99% with nothing remarkable. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. Frame polymer is in excellent condition with little to speak of. Pistol includes the original blue factory foam lined hard case, instruction manual, one 14-round magazine total, bore brush, and a cable lock. Condition is NRA Excellent. ***Modern Firearm***

American made semi-automatic striker fired micro-compact pistol chambered for .30 Super Carry, and manufactured in Springfield, MA. The Smith and Wesson Shield Plus was introduced in 2021. Pistol features an Armornite matte black finish, optic cut slide with a smooth cover, front and rear slide serrations, a 3.1" stainless steel barrel with a target crown, loaded chamber view port, dovetailed tritium front sight with an orange outline, dovetailed tritium square notched rear sight, smooth flat faced trigger with a passive blade safety, metal dual recoil spring assembly, serrated take-down lever, serrated slide stop, serrated frame mounted manual safety, reversible granular textured magazine release, granular textured grip with an 18-degree angle, and an undercut trigger guard. The original Armornite finish retained is approximately 99% with little to speak of. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. The bore shows an internal imperfection in the form of a ring, but the barrel is not bulged and has a new appearance. Frame polymer is in excellent condition with nothing remarkable. Pistol includes the original factory cardboard box with end label, instruction manual, cable lock, 13-round magazine, and a 16 round magazine. Condition is NRA Excellent. ***Modern Firearm***

Turkish made tube-fed pump-action shotgun chambered for 3" 12 Gauge shells, and imported by Dickinson LLC. Moorpark, CA. The Commando XX3T-2, by Dickinson, was introduced in 2025. Shotgun features matte black finish, aluminum receiver with a picatinny optics rail attached, a 18-1/2" round barrel, barrel accepts Mobil choke tubes, knurled saw-toothed radial door breaching muzzle brake, protected red Hi-Viz fiber optic front sight, protected fully adjustable ghost ring rear sight, small square textured bolt release mounted in front of the trigger guard, polymer trigger guard, smooth triangular push-button manual safety mounted on the trigger guard, 5-round tube magazine, grooved magazine tube cap, and a smooth curved trigger. The black polymer furniture consists of a rubber over-molded finger grooved pistol grip, fixed polymer shoulder stock with a sling stud, finger grooved ribbed slide handle with a bottom picatinny accessory rail, 14-1/4" length-of-pull, and a ventilated black rubber recoil pad. The original matte black finish retained is approximately 99% with only superficial handling blemishes. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is smooth and bright (needs to be cleaned). The furniture polymer is in excellent condition with nothing remarkable. Condition is NRA Near Excellent. ***Modern Firearm***

American made semi-automatic rimfire rifle chambered for .22 Long Rifle, and manufactured in Mayfield, KY sometime after 2010. Rifle has a stainless steel construction with matching silver color aluminum receiver, and polymer trigger-guard. It features a 22" round micro-grooved rifled barrel, 3/4 length magazine tube under barrel, protected serrated orange polymer blade front sight, folding elevation adjustable sporting rear sight, serrated curved trigger, serrated receiver optic rail, manual bolt hold open as well as automatic last round bolt lock, checkered charging handle, and annular cut push-button safety. The laminate brown wood furniture consists of a smooth semi-pistol grip shoulder stock, smooth forend, and a checkered factory black plastic butt-plate. A Weaver 2.5-7x 28mm scope with a duplex reticle is mounted to the receiver. Rifle retains approximately 99% of its original satin stainless finish with nothing remarkable. Metal displays no rust, or deformation. The action is smooth and crisp, and the bore is bright with strong rifling, but is a little dirty. The laminate wood furniture is also in excellent condition with superficial handling blemishes. Sight picture on the scope is clear and bright. Condition is NRA Excellent *** Modern Firearm ***

American made semi-automatic striker fired pistol chambered for .45 Automatic Colt Pistol, and manufactured circa 2014 in Prescott, AZ. The SR series of pistols were produced between 2007 and 2019. Pistol features a bull-nosed black nitride slide, 4-1/2" stainless steel barrel, dovetailed blade front sight with a white dot, dovetailed elevation adjustable square notched rear sight with two white dots, smooth nearly flat-faced trigger with a passive blade safety, full-length guide rod with a flat recoil spring, serrated slide stop, serrated ambidextrous frame mounted manual safety, loaded chamber indicator on the top of the slide, striker status indicator on slide plate, lanyard attachment point at butt, interchangeable backstraps, black polymer frame with checkered grip panels and front strap, undercut trigger guard, accessory rail on the dust cover, and a checkered ambidextrous push-button magazine release. The original black nitride finish retained is approximately 99% with very faint edge wear, and little else to speak of. Metal displays no rust, or deformation. The action is smooth and crisp, and the bore is bright with strong rifling. Frame polymer is in excellent condition with nothing remarkable. Pistol includes one magazine total. Condition is NRA Excellent. ***Modern Firearm***

#ssp051190 Brazilian made single-shot break-barrel shotgun chambered for 3" .410 Gauge shells, and imported by Braztech L.C. Miami, FL. Shotgun features a matte nickel finish, an approximately 18-1/2" round barrel, fixed choke measures 'Improved Cylinder' with a drop-in gauge (barrel marked 'MOD'), shell ejector, brass bead front sight, smooth curved trigger, polymer trigger guard, external hammer with a serrated spur, serrated action lever on the right of the hammer, and a serrated left receiver mounted manual safety. The black polymer furniture consists of a thumbhole shoulder stock with checkering at the wrist, checkered Schnabel forend with a sling swivel, and no recoil pad on the shoulder stock. The shoulder stock has an ammo storage compartment. The original matte nickel finish retained is approximately 98% with slight edge wear, and minor handling blemishes. Metal displays no deformation, but there is light oxidative speckling on the right side of the receiver. Action is smooth and crisp, and the bore is smooth and bright. The polymer furniture is in excellent condition with very light blemishes. A rectangular shaped area of adhesive residue is on the left side of the receiver. Condition is NRA Good. ***Modern Firearm***

#JLT5719 American made striker-fired semi-automatic micro-compact pistol chambered for 9x19mm Luger, and manufactured in Springfield, MA. The Smith & Wesson Shield Plus was introduced in 2021. Pistol features a stainless steel slide with an matte black Armornite finish, front and rear slide serrations, a 3.1" stainless steel barrel, dovetailed blade front sight with a white dot, dovetailed square notched rear sight with two white dots, full-length metal guide rod assembly with dual recoil springs, straight-faced trigger with an integrated passive blade safety, serrated slide stop, loaded chamber view port, reversible granular textured push-button magazine release, serrated frame mounted manual frame safety, serrated take-down lever, black polymer frame with granular texturing around the grip, 18 degree grip angle, and an undercut trigger guard. The original matte black Armornite finish retained is approximately 99% with faint edge wear. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. The frame polymer is in excellent condition with superficial handling blemishes. Pistol includes one magazine total. Condition is NRA Excellent. ***Modern Firearm***

American made striker-fired semi-automatic compact pistol chambered in 9x19mm Luger, and manufactured in West Columbia, SC. The Palmetto State Armory Dagger was introduced in 2022 as a Generation 3 Glock clone. Pistol features a Olive Drab Green (ODG) cerakote slide finish, ported stainless steel slide with 'SW3 Window Cuts', 4-1/2" stainless steel threaded barrel with a Diamond Like-Carbon (DLC) finish, 1/2"x28 muzzle threads with a knurled protector, fixed blade front sight with a white dot, dovetailed square notched rear sight with two white dots, smooth slightly curved two-piece safety trigger, serrated slide stop, full-length metal guide rod with a flat recoil spring, striker block safety, smooth push-button magazine release, accepts Glock style magazines, ODG polymer frame with granular textured grip panels and a single finger bump, undercut trigger guard, and an accessory rail on the dust cover. The original ODG slide finish retained is approximately 99% with nothing remarkable. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. The frame polymer is in excellent condition with little to speak of. This pistol is in like new condition, and it appears unfired. Pistol includes the original ODG Palmetto State Armory soft case with label, instruction manual, cable lock, stickers, and three 15-round Magpul PMAGs. Condition is NRA Excellent-Like New. ***Modern Firearm***

American made Bear Creek Arsenal complete side charging upper receiver chambered for 8.6mm Blackout. Upper features a matte black anodized finish on the aluminum parts, flat-top upper receiver with a picatinny optics rail, a matte black 16" barrel with a 1:3" twist rate, spiral slotted flash suppressor, proprietary bolt carrier with a smooth beveled right-side charging handle, JP Enterprises Enhanced bolt, knurled side charging threaded receiver gas plug, low-profile gas block, and a 15" aluminum M-Lok handguard with approximately 2" sections of picatinny rail on the top. The original matte black anodized finish retained is approximately 99% with only superficial blemishes. Metal displays no rust, or deformation. Bore is bright with strong rifling. The overall condition is excellent - Like New.

This lot consists of a Norinco SKS barreled action chambered for 7.62x39mm, and imported by GBE out of Huntington Beach, CA. The barreled action features a blued finish, a 20-1/2" hammer-forged chrome lined barrel, fully-adjustable and fully-protected post front sight, gas block with a left side sling loop, bayonet lug, stock ferrule, rear sight assembly with a sight leaf graduated to 1,000 meters, and a rear receiver cover. The barreled receiver includes only what was previously mentioned. The original blued finish retained is approximately 97% with scratches on the receiver cover, minor handling blemishes, and light edge wear. Metal displays no deformation, but there are small scattered spots of oxidation. The bore is bright with strong rifling. The overall condition is good.

This lot consists of a 13-1/4" fluted heavy barrel chambered for 7mm-08 Remington, and features a threaded muzzle, burnt bronze finish, and a burnt bronze hexagonal barrel nut. The original burnt bronze finish retained is approximately 99% with a few light handling blemishes. Metal displays no rust, or deformation. The bore is bright with strong rifling. The overall condition is excellent.

This lot includes four 6-round Colyer clips for the Remington 700BDL (.270 Win, .30-06 Spring., 7mm Mag, and .264 Mag.), two Mitchell 50/22 rotary magazines, and a 50-round ProMag drum for a pistol.

This lot includes two NFG reflex red dot optics, one Crimson Trace LG-417 laser grip (compatible with 3rd Gen Glock 17, 17L, 19, 22, 23, 24, 24L, 31, 32, 34, 35, 37, and 38), one iProtec 'Sightable Red Laser' picatinny rail mounted red laser., and one S&W N-Frame optic mount for.

American made vintage high compression Benjamin Franklin Model 130 BB gun, serial #B209127. Pistol features a blued finish, an approximately 8-1/2" barrel, fixed blade front sight, elevation adjustable sporting rear sight (missing elevator), smooth curved crescent trigger, knurled cocking knob, smooth cross-bolt safety behind the trigger, smooth grip straps, corn cob style wooden pump handle, and two piece checkered faux wood factory grips with Benjamin Franklin 'High Compression' logos on both sides. The original blued finish retained is approximately 92% with thinning, edge wear, and normal handling marks. Metal displays no rust, or deformation. The furniture is in very good condition with some light handling marks on the left grip panel. The bore is bright and smooth. The overall condition is very good.

American made slide-action shotgun chambered for 3" 12 Gauge shells, and manufactured in North Haven, CT. Shotgun features a blued finish on the barrel and magazine tube, an approximately 28" vent rib barrel, accepts Accu-Choke tubes, choke measures 'Improved Cylinder' with choke installed, steel post front sight, brass mid-post sight, approximately 1/2 length magazine tube, serrated tang safety, dual action bars, and smooth gold-toned trigger. The hardwood furniture consists of a semi-pistol gripped shoulder stock with checkering at the wrist, checkered slide handle, 14" length-of-pull, and brown ventilated rubber recoil pad with black spacers. The aluminum receiver has a black finish. The original blued finish retained is approximately 98% with small handling marks, light edge wear, and friction wear on the tube/action bars. The receiver has some minor scratches, and edge wear. There was no observed metal deformation, but there was some small spots of rust present along the barrel. Bore is bright and shiny, and the action is smooth and crisp. Furniture wood is in very good condition with very small scratches and nicks. Condition is NRA Good. ***Modern Firearm***

Vintage American made single-shot bolt action rimfire rifle chambered for .22 Short, Long, or Long Rifle, and manufactured in New Haven, CT. These rifles were produced from 1949 until 1954, and are renowned for their accuracy. Rifle features a blued finish, an approximately 26" barrel, adjustable rear sporting sight, adjustable Mossberg S-130 rear peep sight, Mossberg S-101 front sight with multiple sight inserts, adjustable serrated curved trigger, plastic finger grooved trigger guard, full-length tube magazine, serrated rear receiver mounted manual safety, and turned down gavel style bolt handle. The hardwood furniture consists of a smooth semi-pistol gripped Monte Carlo style shoulder stock, smooth Schnabel forend, quick disconnect sling swivel mounts on the forend and buttstock, and a serrated black plastic butt plate. The original blued finish retained is approximately 92% with thinning on the top of the barrel, edge wear, light handling marks, and the finish is turning a dark mottled grey patina. Metal displays no deformation. There was a couple extremely small spots of rust on the barrel, and some rust observed on the rear QD sling mount. The action is smooth and crisp, but dry, and the bore is bright with strong rifling. The furniture wood is in good condition with handling marks and edge wear. The trigger guard sits high, slightly out of its groove. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

American made magazine fed bolt-action rimfire rifle chambered for .17 Hornady Magnum Rimfire, and manufactured in North Haven, CT. The Model 917V series was in production from 2004 until 2010. Rifle features a blued finish, receiver drilled and tapped for optic mounting, dovetail scope rail machined into the receiver, 22" heavy barrel with a recessed crown, no provision for iron sights, T900 trigger system with a serrated curved trigger shoe, knurled thumb safety on the right of the receiver, turned down and swept back bolt handle, cocking indicator on the cocking piece, serrated magazine release mounted in the magazine well, and accepts detachable 4-round and 7-round magazines. The laminate furniture consists of a smooth thumb hole shoulder stock, smooth forend with a sling stud, sling stud at the bottom of the shoulder stock, right-hand cheek weld, and a solid brown rubber Marlin recoil pad with a black spacer. The original blue finish retained is approximately 97% with very light handling blemishes, and edge wear. The aluminum trigger guard's finish is approximately 95% with edge wear. Metal displays no deformation, but there is sparse oxidative speckling along the barrel, and on the bolt knob. The furniture wood is in near excellent condition with a few extremely light handling marks, and a material transfer on the cheek weld. Bore is bright with strong rifling, and the action is smooth and crisp. Rifle includes one magazine total. Condition is NRA Good. ***Modern Firearm***

Brazilian made double-action revolver chambered for both .45 Colt, and 3" .410 shotshells. The Judge was introduced in 2006. Revolver features a blued finish, 3" ribbed barrel, dovetailed orange fiber optic front sight, square notched top strap rear sight, case-colored hammer with a checkered spur, case-colored smooth curved trigger, 3/4 length underlug with a knurled ejector rod, fluted five-round cylinder, checkered thumb piece, internal locking safety on the rear of the hammer, transfer bar safety, and a single-piece ribbed black rubber grip with Taurus Medallions on both sides. The original blued finish retained is approximately 94% with muzzle wear, light carry blemishes, some edge wear, and a feint drag line on the cylinder. The cylinder is starting to take on a plum color. Metal displays no rust, or deformation. The action is smooth and crisp with slight play in the lock-up. The bore is bright with strong rifling, and the cylinder chambers are also bright. The rubber grips are in excellent condition with some dirt in the ribs. Condition is NRA Very Good. ***Modern Firearm***

SN: MT11671. ‘First Series’ This 1941 vintage pistol has been fully customized with a high polish blued refinish, custom slabside barrel with rib, custom sights, and custom grip. Configuration: 5 1/4" slab sided barrel with checkered sighting rib, pinned patridge front sight, fully-adjustable Micro rear sight, serrated curved trigger with overtravel stop in the triggerguard, thumb safety/slide stop lever mounted on the left side of the frame, and vintage “Pointer” stocks from W. Murad of San Carlos California with molded oak leaf/acorn motifs & thumb rest on the left panel. The bore is very good/bright, the action is smooth, the grips are very good, and the re-blued finish about 97% with minor scratches. The 'Rampant Colt' and Colt markings on the slide are clear but the "Woodsman" marking is partially washed out from the re-finish. Comes with a set of checkered wood finger rest target grips and one original magazine. NRA Condition-Very Good as customized. Model Firearm - C&R Eligible.

1) Two boxes of 33 Winchester caliber rifle cartridges, marked for 1886 repeating Winchester rifle with UNC dog bone trade mark. 1st box matching headstamps and reloaded soft point 200 grain. slight discoloration and minor boxing age. Second box is 8 rounds matching head stamps (reloaded) 12 primed cases 2) Matching Lee reloading die set in 33 Winchester

American made semi-automatic long stroke piston operated Kalashnikov type rifle chambered for 7.62x39mm ammunition, and manufactured in West Columbia, SC. This is Palmetto's GF3 line of AK style rifles with a pinned and weld muzzle device, bringing the barrels overall length to 16". Rifle features a matte black receiver finish, 4150 steel nitride barrel with a 1:9 twist rate, stamped 1mm receiver with 'X/Y' axis pin markings, ALG trigger with Lightning Bow, fully adjustable protected post front sight, elevation adjustable tangent rear sight graduated to 800 yards, ribbed dust cover, manual safety lever mounted on the right side of the receiver, AK-74 style muzzle brake, combination gas block and front sight base, smooth charging handle, paddle magazine release mounted at the magazine well, and a optic mounting rail on the receiver's left side. The plum polymer furniture consists of a serrated and granular textured Magpul MOE pistol grip with a storage compartment, Magpul Zhukov-S adjustable folding shoulder stock, Magpul MOE forend with M-Lok slots, and a Magpul MOE handguard. The left of the front trunnion is marked 'GF3' with a partial serial number. The right side of the receiver has 'S, A, and F' selector markings. The original matte black finish retained is approximately 98% with a safety drag line, minor edge wear, and superficial handling marks. Metal displays no deformation, but oxidation was observed on the bolt carrier. Rivets are pressed flat and domed. Action is smooth and crisp, and the bore is bright with strong rifling. Furniture polymer is in excellent condition with nothing remarkable. No magazine provided. Condition is NRA Good. ***Modern Firearm***

#d2000

American made single-shot falling block rimfire rifle chambered for .32 Rimfire, and manufactured in Norwich, CT. Hopkins & Allen Co. (H&A) produced falling block rifles circa 1887 – 1914. The H&A Junior Model had several sub-variations, and after 1902 the Numbers 922 (.22LR), 925 (.25RF), and 932 (.32RF) were added to their line. Rifle features a blued finish, an approximately 23-3/4" round barrel, dovetailed blade front sight, elevation adjustable rear sporting sight, smooth curved trigger, elaborate trigger guard that doubles as the action lever, take-down screw mounted in front of the trigger guard, external hammer with a serrated spur, and a shell extractor. The hardwood furniture consists of a smooth straight gripped shoulder stock, smooth forend, and a smooth crescent metal butt plate. The top barrel markings read, "MADE BY THE HOPKINS & ALLEN MANFG. CO. NORWICH CONN. U.S.", and "THE MERWIN HULBERT & CO. JUNIOR" below. The receiver shows a brown patina, which may be period correct. The original blued finish retained is approximately 95% with some edge wear, small handling blemishes, and the finish taking on a dark brown patina. Metal displays deformation at the muzzle, and oxidative speckling around the sights. Furniture wood is in fair condition with normal handling and storage marks for its age, but there is cracking on the right side of the shoulder stock by the receiver, and small cracks around the top tang. Action is smooth and crisp, and the bore shows rifling with some use. The markings are fairly sharp, but still legible. Condition is NRA Fair to Good. ***Modern Firearm - C&R Eligible***

American made sub-compact semi-automatic striker fired pistol chambered for 9x19mm Luger, and manufactured in Smyrna, GA. The 43x MOS (Modular Optic System) was introduced in 2019, and designed for concealed carry. It combines a Glock 43 slide with a longer grip. Pistol features a matte black nDLC (Diamond Like Coating) slide finish, bull-nosed slide with front and rear cocking serrations, micro-optic cut slide, a 3.41" Marksman rifled barrel, fixed blade front sight with a white dot, dovetailed square notched rear sight with a white outline, slim accessory rail on the dust cover, full-length guide rod assembly with dual captive recoil springs, serrated curved trigger with an integral blade safety, firing pin safety, reversible push-button magazine release, and a slim black polymer single-stack frame with small square texturing. The original nDLC finish retained is approximately 99% with nothing remarkable. Metal displays no rust, or deformation. Bore is bright with strong rifling, and the polymer frame is in excellent condition with little to speak of. The action is smooth and crisp. This pistol is 'like-new' in box, and still has the factory copper-colored Loctite C5-A anti-seize lubricant in the slide (used for break-in). Pistol includes the original factory foam lined black plastic hard case with end label, instruction manual, cleaning tools, cable lock, torx wrench for optic mounting, magazine speed loader, and two magazines total. Condition is NRA Excellent - Like New. ***Modern Firearm***

Early 19th century Spanish or New Orleans influenced bowie knife by contemporary make Byron Kehew. 9 1/4" blade, 14 3/4" overall, minor sharpening with slight carry or use wear

American made slide-action shotgun chambered for 2-3/4" 12 Gauge shotshells. The Western Field Model 35 was a Montgomery Ward's department store brand manufactured by Stevens, and modeled after the Stevens Model 520. These shotguns were produced until about 1939. Known for its early "locomotive" style receiver, this shotgun features a blued finish, a 30" round barrel, brass bead front sight, smooth curved trigger, serrated bolt release on the left side of the trigger guard, single action bar, 1/2 length tube magazine, and an annular cut manual safety in the trigger guard. The hardwood furniture consists of a semi-pistol gripped shoulder stock with checkering at the wrist, checkered round slide handle, 13-1/4" length-of-pull, and a serrated black plastic butt plate. The original blued finish retained is approximately 50% with general thinning, handling wear light scratches, and edge wear. The finish is taking on a dull gray to brown patina. Metal displays light oxidative speckling on the tangs, but no deformation. Action is smooth and crisp, and the bore is smooth and shiny. The furniture wood is in good condition with the original finish stripped off, and a repair to the bottom of the shoulder stock. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

'FOR PARTS, OR REPAIR' - American made bolt-action rimfire repeating rifle chambered for .22 Short, Long, and Long Rifle. The Winchester Model 72A was produced circa 1949 until 1959. Rifle features a blued finish, receiver drilled and tapped for optic mounting, two-piece optic mounts installed onto the receiver, a 25" tapered barrel, dovetailed blade front sight with a brass bead, rear sight removed (open dovetail), serrated curved trigger, smooth turned down bolt handle, 2/3 length tube magazine, serrated manual safety on the right side of the receiver, and a stamped metal trigger guard. The hardwood furniture consists of a smooth wood semi-pistol grip shoulder stock, smooth forend, sling swivel studs on the bottom of the butt plate and forend, and a checkered black factory composition butt plate. A Simmons 8-Point 4x32mm scope with a duplex reticle is mounted on the receiver using two-piece 1" Weaver rings. The original blued finish retained is approximately 85% with some handling blemishes, edge wear, and some mottling on the rear of the receiver. Metal displays some scarring on the bolt and in the receiver. There is a spot of oxidation on the bottom of the barrel. Bore is bright with strong rifling. The bolt binds during manipulation, and it releases the firing pin inadvertently. The furniture wood is in very good condition with a burn mark on the right side. The scope's sight picture is clear and bright. Condition is NRA Poor. ***Modern Firearm - C&R Eligible***

Croatian compact semiautomatic pistol imported by Springfield Armory, Geneseo IL. Features green polymer frame with accessory rail, matte black slide, 3" barrel, full length guide rod, 3 dot sights in dovetails, striker fired, cocking indicator, loaded chamber indicator, manual safety in trigger, grip safety, ambidextrous magazine release. Condition is like new, excellent condition with limited signs of handling, bore is excellent/bright. Includes two factory 10rd magazines. Original factory fitted hard case with matching label, manual, cleaning gear and cable lock. Condition is NRA Perfect - Like New. Modern Firearm.

Rare vintage 'All Brass" Benjamin Franklin Model 312 .177 Cal repeating pump action air rifle, manufactured 1940-1969 Multi-pump pneumatic with a swinging pump handle, manual safety, brass barrel and air chamber with a walnut hardwood stock, distinctive "Tootsie Roll" shaped lever handle. Brass has mostly turned a dark patina, in good working order.

32in Long

Inscribed "Presented to, Earl R. Willmeroth - April 28,1954, Great Lakes, Ill." Near Excellent condition. marked made in U.S.A.

Brazilian made stainless steel double action revolver chambered in .22 Long Rifle. Imported by Interarms. Manufactured 1981-85. Blued finish, plum colored trigger, 6' barrel, raised serrated blade front & micro-adjustable square-notch rear sights, 6 round capacity, checkered wood grips, serrated trigger & hammer spur. Comes in original factory box with matching label, manual. The bore is excellent, action is smooth with tight lock-up and the finish & wood are excellent. NRA Condition-Excellent. Modern Firearm.

An extremely popular German made classic knife developed in 1956 for the East African hunting organization EAPHA. Manufactured in Solingen, Germany, this is a versatile knife with a hatchet edge ground into the center of the back of the blade for chopping, and a sturdy tip. The blade has a saw tooth grind in the back of the cutting edge for sawing, or fish scaling. The handle is comprised of staghorn scales that are firmly through-riveted to the tang. The blade length is 6.10" with a thickness of .200", and giving a total length of 10.63". The blade is comprised of a variation of 440A stainless steel with a 55-57 HRC (Rockwell hardness). Knife includes the original dark brown leather sheath, and a second lighter colored leather sheath.

'Featherlight', American made slide-action repeating shotgun chambered for 2-3/4" 20 Gauge shotshells, and manufactured after 2005 in Ithaca, NY. Shotgun features a blued finish, a 26" round barrel, orange fiber optic front sight, bore measures 'Improved Modified' with a drop-in gauge, five-round tube magazine, smooth curved trigger, bottom eject, single action bar, and checkered push-button safety on the trigger guard. The walnut furniture consists of a semi-pistol grip shoulder stock with floral press checkering at the wrist, floral checkered slide handle, factory red ventilated recoil pad with white and black spacers, 14" length-of-pull, and black Ithaca grip cap with a white spacer. The receiver displays limited coverage of dog and waterfowl scenes roll stamped on both sides. The original blued finish retained is approximately 97% with light handling blemishes, contact wear from the slide handle, and minor muzzle wear. Metal displays no deformation, but there is light oxidative speckling. The action is smooth and crisp, and the bore is smooth and shiny. The furniture wood is in good condition with a chip on the slide handle, and some light scratches and dings. Condition is NRA Good. ***Modern Firearm***

19th century American styled bowie knife by Byron Kehew of Nevada City, CA. 10 1/4" chipped point blade and 15 3/4" overall, Brass studded wood grip with brass mounts. Leather scabbard, minor wear from carry and use.

American made single action rimfire revolver chambered for .22 LR, Old model manufactured circa 1970 in Southport, CT. Revolver features a blued finish, 9-1/2" round barrel, half-moon front sight, square-notch rear sight, fluted six-round cylinder, collard cylinder pin head, 3 screw frame, round ejector rod button, smooth curved trigger, frame mounted firing pin, two-toned hammer with serrated spur, smooth grip straps, and two-piece smooth wood grips with black/silver Ruger medallions. The original blued finish retained is approximately 98% with only very light scattered scratches. Bore is bright with strong rifling, and the cylinder chambers are also excellent. Wood grips are excellent, and the action is smooth and crisp with a tight lock-up. Comes with extra cylinder in factory box. Condition is NRA Excellent. C&R Firearm.

Stripped lower receiver in excellent condition

Single-action revolver made in the style of the Colt SAA, 6-round capacity, zinc alloy frame with black oxide steel barrel and cylinder, 2.68' barrel with 1:10 RH twist, fixed sights, scroll laser engraved wood grips, manual thumb safety, pull-pin cylinder release, loading gate. Bore is very good/bright, revolver is in overall like-new condition. Comes in factory box with matching label and manual. NRA Condition-Excellent. Modern Firearm.

Single action rimfire revolver. .22 LR cylinder installed. Features blued finish, smooth wood grips with black/silver Ruger medallions, 4 3/4" barrel, raised, serrated front blade with red insert, adjustable rear square-notch sights, fluted 6 shot cylinder. Bore is excellent/bright. Retains 97% blue with very minor muzzle wear,minor cylinder track. Wood grips are excellent. Action is smooth with tight lock-up. Comes with the .22 Win. Magnum cylinder. Manufactured 1977. Condition is NRA Excellent. Modern Firearm.

Native American style buffalo lance. Designed for use from horseback for hunting buffalo and for close-quarters combat. Described as very accurate at short distances. 48-1/2 X 11

Maker marked "Tsihnahjinnie" from Artist Andrew Van Tsihnahjinnie. Navajo style scene with horse, rider and monument valley style rock formations. Measures 26"W x 21-1/2"H

A traditional educational and artistic display showing the natural plant materials used to create dyes for wool in Navajo weaving. Measures 24" x 20"

Three running horses set against a desert landscape. Maker marked JACK LEE in lower center

One scale is an Ohaus 505 precision loading scale designed primarily for hand loading ammunition and the other is a classic Ohaus triple beam balance 2610g scale. Both pieces show age expected and use.

American made box-lock side by side field grade shotgun chambered for 16 gauge, with 2 3/4" chambers. A pre-1968 firearm because there are no serial numbers. This shotgun is a Sears, Roebuck & Company department store brand which is basically a re-branded Stevens Model 311A. It features blued 26" barrels, steel bead front sight, internal hammers, dual smooth curved triggers, serrated sliding tang safety, a 14 3/4" length-of-pull, and checkered top lever. The hardwood furniture consists of a smooth semi-pistol grip stock, smooth forend, and a brown ventilated rubber recoil pad with black spacer. The receiver is color-case hardened, with the rest of the parts being blued. The left bore measures 'IC,' and the right bore measures 'CYL' with a drop-in gauge. The bores appear bright, and the action is smooth and crisp. The furniture wood is in good condition with a few minor blemishes from use, a couple hairline cracks around the wrist, and have been refinished. The remaining original blued finish is approximately 88% with scattered scratches, edge wear, minute surface rust, and general thinning. Condition is NRA Good ***Modern Firearm - C&R Eligible***

Includes toys manufactured by The Sun Rubber Co., Oliver, Hubley, and others. Includes airplanes, tractors and belly-dump trailer truck. Chipped paint from use and age. (1) airplane has broken wing. Belly-dump truck is missing (1) front tire. Good condition overall.

Includes: Bell Telephone truck with pole trailer and accessories. Paint is in good condition with some chips from use and age. Fire Ladder Truck with driver, 3 ladders and racks. (1 rack has leg missing). Both are in great condition.

Includes toys manufactured by Hubley, The Sun Rubber Co., Dinkey toys, and others. Includes cargo truck , truck with trailer, forklift, Coca-Cola truck and other 1920's to 1940's styled cares and trucks. Chipped paint from use and age. In good condition overall.

"X-treme Duty" Croatian made double/single action semi-automatic compact pistol imported by Springfield Armory, Geneseo, IL. Features a matte black Melonite finish, 3.3" hammer forged barrel, two-piece steel guide rod, dovetailed red fiber optic front sight, dovetailed two-dot rear sight, smooth trigger, serrated hammer spur, ambidextrous manual safety on the frame, loaded chamber indicator, ambidextrous push button magazine release, 8 round factory magazine, and black polymer frame with integral accessory rail & stipple grip. Mag release spring missing or installed wrong, mag catch does not spring back after pressing. Bore is pristine. Retins 98% finish with minor handling marks, edge losses. Includes the original factory hard case with documents, lock, a spare 9 round magazine with grip extension. Condition is NRA excellent (mag catch problem)

Austrian semiautomatic pistol, imported by Glock Inc., Smyrna GA. Features approx 4" barrel, fixed front sight with white dot, dovetailed rear sight with white outline, striker fired, manual safety in trigger, interchangeable backstraps. All black finish. Bore is very good condition. Retains 95% finish with handling marks, some edge losses, showing some bare metal on slide stop. Polymer frame is very good. Numbers match on frame, slide, barrel. Includes factory plastic case, additional backstraps, and (3) magazines. Condition is near NRA excellent.

'For Parts or Repair' Vintage break-open single barrel boxlock shotgun with 2 3/4" 12 gauge chamber. Blued & case hardened finish, 30" modified choke barrel, large silver bead front sight, smooth trigger, non trigger guard, exposed hammer with serrated spur, knurled top lever, smooth walnut forend and semi-pistol grip shoulder stock with serrated buttplate & 14 1/4" LOP. The receiver is stamped "ILL 2858". The barrel exhibits little remaining finish and the receiver bears muted case colors with the balance of the metal surfaces turned to brown patina. Action does not open consistently but is otherwise functional, the bore appear very good but dirty and the wood stocks are fair with scattered finish loss & cracks. Condition is Poor. ***C&R Firearm***

Blued and anodized, pump-action, tube magazine fed shotgun with a 26" barrel, full choke, 3" chamber, raised ventilated sight rib, front bead sight, checkered wood forend, pistol grip wood butt stock and a black plastic butt plate. Bluing has some surface rust and light wear. Anodized receiver has three small scratches. Bore is mirror bright. Action works well. The safety switch is broken but still engages the safety. Forend has a few small dings. Butt has rubs and dings. Butt plate has scratches at heel and toe. Condition is good to very good. *Modern Firearm*

Lever action rifle features blued finish, case color finger lever, straight gripped walnut shoulder stock with flat metal buttplate, smooth walnut forend with schnabel tip, 22" barrel, blade front sight, rear sight dovetail mid-barrel filled with a steel blank, two piece Weaver scope mount & rings, fixed rotary magazine with cartridge counter, sliding tang safety, cocking indicator, sling swivels. Tang safety does not lock lever. Cocking indicator does not protrude from tang when action is cocked. Bore is very good condition. Retains 75% blue, with scratches & scuffs, bare metal on sharp edges, some touch up blue visible on receiver, mottled finish loss spots on receiver bottom. Finger lever retains much fiery color. Wood is fair condition, noticeable losses at upper & lower tang, crack on upper left side near tang, visible plug or dowel repairs, refinished with varnish. Mounts a good condition Bushnell Sportview 6x40mm scope, with duplex reticle & good optical view. Includes fair condition leather sling. Condition is NRA Good+ (repaired/refinished stock) *** Modern Firearm ***

.357 Military & Police Heavy Barrel Stainless' Medium frame stainless steel double-action revolver chambered in .357 Magnum, manufactured circa 1977-1982. Features a brushed finish, pinned 4" heavy barrel with matted sighting rib, non-shrouded ejector rod, serrated ramp front sight, square notch rear sight, fluted six-shot cylinder with counterbored chambers, serrated .265" service trigger, .265" service hammer, three screw square butt K service frame and one-piece Pachmayr Gripper checkered black rubber wrap-around finger groove grip. Revolver exhibits moderate holster wear and scattered handling marks. Action is strong with very good lock-up, the bore is excellent, and the rubber grips are very good. Condition is NRA Good to Very Good. ***Modern Firearm***

Semiautomatic pistol features chrome finish, fixed sights, manual safety, wood grips, 2.25" barrel. Bore is good condition with signs of roughness, may improve with cleaning. Externally very good with few scuffs. No magazine included. Condition is NRA Good

#1) Iver Johnson Second Model Safety Automatic Hammerless .38 Centerfire SN: R54973 Vintage concealed hammer double-action-only top break revolver chambered in .38 caliber centerfire, manufactured circa 1896-1908. Features a nickel plated finish, ribbed 3.25" barrel, round blade front sight, 'u' notch rear sight cut in the top of the "T" shaped barrel latch, fluted five-shot cylinder with automatic ejector(not working properly), trigger safety, concealed hammer, blued trigger guard and two-piece checkered hard rubber grips with molded owl heads & ornate patterns. 70% finish, fair to good bore, good markings, the action does not function consistently and the grips show a crack in the left panel but are otherwise good. Condition is Fair. #2) Iver Johnson "U.S. Revolver Co." Automatic Hammerless .32 Centerfire SN: 47169 Vintage concealed hammer double-action-only top break revolver chambered in .32 caliber centerfire, manufactured circa 1910-1935. Features a nickel plated finish, ribbed 3" barrel, round blade front sight, 'u' notch rear sight cut in the top of the "T" shaped barrel latch, fluted five-shot cylinder with automatic ejector, smooth case hardened trigger, concealed hammer, blued trigger guard and two-piece checkered hard rubber grips with molded owl heads & ornate patterns. 80% finish, fair to good bore, very good markings, very good grips and working action with one cylinder that does not lock-up. Condition is Fair. ***C&R Firearms***

Manufactured circa 1900. Stripped receiver, with no internal parts. Mottled coloration with silver and gray. Drilled & Tapped (4) places on left side. Condition is NRA Good (Receiver Only) *** C&R Firearm ***

Upgraded 10/22 semi-automatic rifle. 18.5" barrel, with rear flip notch, front blade/bead sights, stainless steel receiver & barrel, black polymer side-folding pistol grip stock with textured handguard, ATI 6 position butt stock with adjustable comb, installed fore grip and adjustable bipod, ported cone shaped muzzle break installed. Mounted with a Simmons 22 MAG 4X32 scope on one piece base, duplex reticle, Butler Creek lens caps, scope is wrapped in black tape. Bore is excellent/bright, action is smooth Folding stock is very good. Comes with a 50-rd clear plastic magazine, three 10-22 tri-magazines and two 30-rd Ram-Line magazines in USGI ammo pouch. NRA Condition-Very Good. Modern Firearm.

Made in Italy in the late 1960's by early replica manufacturers like Armi San Paolo and branded for the Hawes importer label. Black powder reproduction of the classic .36 caliber Colt 1851 Navy revolver. 7.5" blued octagonal barrel, brass plated backstrap and trigger guard, and roll engraved cylinder depicting Battle of Campeche. Case hardened frame, hammer, trigger and loading lever. Thin, smooth trigger, knurled hammer, with bead front sight and v-notch rear sight on hammer. One piece wood grips are excellent, action is smooth with tight lock-up, brass has a nice aged patina, the case colors are good with some fading, the barrel has heavy holster wear and is mostly turned a gray patina with traces of blue and the bore is very good/bright with strong rifling. Comes in nice dark brown tooled basket weave single-loop holster and original Hawes booklets on these revolvers encased in plastic. NRA Condition-Very Good. Antique Firearm.

Brazilian double action revolver imported by Taurus, Miami FL. Features satin stainless steel finish, textured black rubber ERGO grip, 2" full lug barrel, serrated blade front sight with orange insert, micro-adjustable rear sight with white out-line, 8 shot fluted cylinder, Taurus locking system in hammer. Revolver shows few handling marks, light rub spots to satin finish, action is smooth with tight lock-up, grips are excellent and the bore is Excellent. NOTE* The insert for the front side plate screw that hold the cylinder yoke in place is missing so the cylinder is loose on the frame. Easy fix. Condition is NRA Fair/Screw Insert. Modern Firearm.

Post war German black leather holster for the P-38/P1 pistol. The type used by the Bundeswehr and the West German federal Police. Complete with closing strap and stud. the back is stamped "12-120-6169" over the maker "B.Meyer, Gronau". Comes with two 8 round magazines marked "P1 9mm" with Walther banner. One is dated "5/76". Magazines have some English electro-penciled marking on them. Holster is in excellent Condition.

American made stainless steel large frame single-action revolver chambered for .22 Long Rifle, manufactured circa 1981 in Southport, CT. Pistol features a blued finish, 6 1/2" round barrel, raised serrated ramped front sight, (Painted white) micrometer adjustable notched rear sight, collard cylinder pin head, round ejector rod button, fluted six-shot cylinder, smooth wide curved trigger, serrated hammer spur, transfer bar safety, smooth grip straps, and two-piece faux stag grips. The original blued finish retained is approximately 94% with minor scattered scratches, light edge/muzzle wear. The action is smooth and crisp with a good lock-up, and the stag grips are also excellent. The bore is bright with strong rifling, and the NRA Condition-Very Good to Excellent. Modern Firearm.

Remington 870 shotgun with upgrades to tactical configuration. Features a blue finish, 18' barrel with raised white-dot blade front and rear adjustable aperture sights, 13 1/2' vented heat shield installed on the top of the barrel, full length tube magazine with extension, 4' accessory rail on the underside of the black polymer slide handle, textured black polymer pistol grip with finger grooves, ATI 6 position stock with adjustable comb, five shell holder installed. The bore is excellent/bright, action is smooth, the furniture is very good and the blue is about 80% with handling/edge wear, many scratches and finish loss on the magazine tube. NRA Condition-Good+. Modern Firearm.

Single shot muzzleloading rifle for use with black powder only. Breaks open to prime, centerline ignition with hammer. Features satin stainless steel finish, Realtree Xtra Green Camo polymer furniture, 26" fluted barrel with no provisions for sights, ramrod under barrel, opening lever at rear of trigger guard, sling studs, CVA CrushZone recoil pad, shallow double sided cheek pieces, checkered panels at wrist and forend. Comes with a Konuspro 3-9x40 I.R. scope with Ballistic Reticle, rings and bases. Comes with CVA brown nylon case with manual, paperwork, 100 Remington 209' primers, tools, cleaning gear, patches and about 25 loose .50 cal bullets. Rifle is in like-new condition, the bore & scope are excellent. NRA Condition-Excellent. Antique Firearm.

Umarex Colt Peacemaker 0.177 Single Action Air Pistol. Nickel Plated, 380 FPS, Co2. Black polymer grip with "Colt Peacemaker" medallions. Comes in original box with manual, 6 dummy cartridges, two unopened tins of Crosman pellets, 250 each, unopened box of 30 Umarex Co2 cylinders and 3 loose ones. Like new condition.

Including a single two tone leather holster rig for medium frame revolver. 44" end to end. Hunter single brown leather holster rig. 44" end to end. A webbing belt, a brown cartridge belt and a shot shell keeper on belt.

Wood burn hat rack with antler hooks. Bailey brown wool hat panhandle model size small and MHT 3x beaver black size 7 hat.

Engraved Belgian Lefaucheux type pinfire revolver. Made very much in the French style. 9.5mm Lefaucheux pinfire chambering, double/single action with a 6 round cylinder. There is no maker mark, but there are a few double letter marks stamped in various places. The cylinder has the the E / L G / * in an Oval marking of the Belgian Gun making city of Liège in use prior to 1893. Star over a letter Z Belgian proof also on cylinder .( dates from1877 to 1968). Serial number matched on barrel and frame under the left grip panel. Has top strap & lanyard loop, nickel finish with floral/scroll engraving, checkered wood grips, 5" barrel. The action works fine with hard trigger pull, the bore is dark, pitted, the grips are overall very good with a small chip out of the right panel and the finish is about 65% with flaking and handling wear. NRA Condition-Very Good. Antique Firearm.

Star Model B stamped "LPN." on the front grip strap, issued to the Landespolizei Niedersachsen, The Police for the ministry of Interior in Lower Saxony, West Germany in the early 1950's. Pistol has the "Y" date code, 1953. Spanish 9x19mm semiautomatic pistol made in the style of the 1911. Features blued finish, checkered wood grips, single action trigger, 5" barrel, fixed sights, frame mounted manual safety, push button mag release, arched, knurled back strap. Bottom of grip marked "B" and serial "423686" , partial SN "686" is matched on the magazine, slide, barrel bushing, slide latch and the safety lever. Bore is excellent/bright, retains about 85% blue with handling/edge wear, grips are very good, sound. Includes a good condition black leather full flap holster stamped on back "Hess. L. Polizei". Stands for Hessische Landespolizei (Hessen State Police), ECO (inside a large "G"): This is the trademark logo for Geco (Gustav Genschow & Co.) and the Hessenlöwe (Hessian Lion) with extra magazine in slot, marked "239". Both magazines are marked "Star" NRA Condition-Very Good. Modern Firearm.

(1) Blue Streak, 5mm cal., SN: 037615. fixed sights and rail for scope. Safety works, stock has minor scratches and dings. Does not hold air. (2) NVSN, adjustable peep sight, thumb safety (works). Stock is in fair condition with some dings and scratches. Does not hold air. (3) Blue Streak, SN: 6691F, fixed front and rear (adjustable) sights, safety works. Stock is in good condition with minor scratches and dings. Does not hold air.

(1) Model 342, .22 cal., SN: T245790. Safety works. Stock is dull but in good condition. Holds air. (2) Model 342, .22 cal., SN: T87952. Brass alloy barrel, adjustable rear peep sight. Stock has been repaired. Safety works. Holds air.

(1) Sears Roebuck & Co lever action BB gun. Model 799.19052. Features an octagonal blued barrel, gold-tone receiver with a left-side saddle ring, brass-tone hardware, and swirl faux-wood plastic stocks. Chipped paint and rust on barrel. Made between 1969-1973. (2) Daisy Model 1894 BB gun. Blued barrel, left-side saddle ring, faux-wood plastic stock. Chipped pain with some rust

Bolt action magazine fed shotgun circa 1949-1955. It has a blued finish, one piece pistol grip wood stock, vented rubber "Western Field" recoil pad, C-Lect-Choke system, 26" (including choke), ported barrel. steel bead, serrated trigger, plastic finger groove trigger guard (not cracked), side swing tang safety button,with red/green inserts and a detachable magazine. LOP is 14 1/4". Bore is very good/bright. Retains 92% finish with light handling wear on the receiver & lower barrel. Wood is overall very good/sound with minor scratches/dings. NRA Condition-Very Good. C&R Firearm.

American made slide-action repeating shotgun chambered for 2-3/4" 12 Gauge shotshells, and manufactured in New Haven, CT. The Model 25 was produced for only five years, with production beginning in 1949 and ending in 1954, and 87,937 shotguns were produced. Based on the Model 12 action, and due to the Model 12's high cost, the Model 25 became known as the “poor man’s Model 12.” Shotgun features a satin blue refinish, steel receiver with an anti-glare serrated top, an approximately 28" round barrel, the fixed choke measures 'Improved Modified' with a drop-in gauge, steel bead front sight, half-length magazine tube, smooth curved trigger, single action bar, serrated bolt release behind the trigger, and a checkered cross-bolt safety behind the trigger guard. The refinished hardwood furniture consists of a smooth semi-pistol gripped shoulder stock, a press-checkered slide handle, 13" length-of-pull, and a checkered black factory plastic butt plate. The blued refinish retained is approximately 99% with only some contact wear on the action bar. Metal displays no deformation, or rust. Action is smooth and crisp, and the bore is smooth and shiny. The furniture wood is in excellent condition as refinished with a few light handling blemishes on the shoulder stock, and small repaired cracks behind the receiver. Condition is NRA Very Good - as Refinished. ***Modern Firearm - C&R Eligible***

"The Widow Maker," an American made semi-automatic recoil operated repeating shotgun chambered for 2-3/4" 12 Gauge shotshells, and manufactured in New Haven, CT. The Winchester Model 1911 SL was produced from 1911 until 1928 (Blue Book reference) with approximately 103,246 units produced. Shotgun features a blued finish, long recoil action, an approximately 26" round barrel with checkered grip knurling, the fixed choke measures 'Improved Modified' with a drop-in gauge, front sight with a silver-toned bead, half-length tubular magazine, checkered cross-bolt safety at the rear of the trigger guard, smooth curved trigger, knurled take-down knob at the rear of the receiver, and smooth cross-bolt bolt release. The hardwood furniture consists of a smooth semi-pistol gripped shoulder stock, smooth finger grooved forend, 13-1/2" length-of-pull, and a black checkered factory plastic butt plate. The shotgun is charged by 'pulling' back the barrel by the checkered section with it pointed in a safe direction. Some users mistakenly cycled the weapon by placing the butt on the ground, and forcing the barrel down. In this position, the muzzle will be pointing towards the face of the user, and creating a potential situation for a slam fire (The Widow Maker). There are standard Winchester markings on tang and barrel, and they are sharp and legible. The original blued finish retained is approximately 96% with edge wear, contact wear from disassembly, and minor handling blemishes. Metal displays no rust, or deformation. The action is smooth and crisp, and the bore is smooth and shiny. The furniture wood is in good condition with general thinning to the finish, and very light handling blemishes. Condition is NRA Very Good. ***Modern Firearm - C&R Eligible***

No. 32 Standard 1875. Manufactured by J.M. Marlin in New Haven, Connecticut, from 1875 to 1887. Based on the serial number this revolver was made circa 1878-1880. Single action spur trigger revolver chambered in .32 RF Short caliber. (First variation). Smooth rosewood birds head grips. Top hinged 3" tip-up blued barrel with solid rib. Brass frame that was nickel-plated that has worn off with time and is now a dark mustard patina. the barrel rib is marked "No. 32 Standard 1875", left barrel in marked "J. M . MARLIN New-Haven CT. Pat. July 1 1873". The serial number is matched on the left grip frame under the grip, rear of the cylinder, barrel lug and is stamped on the inside of the left grip panel. The bore is bright with good rifling, some scattered light pitting, the action is sound, the grips are very good and the blue on the hammer & cylinder is about 40% with handling wear. NRA condition-Near Fine. Antique Firearm.

(1) 1950's Model 312, .22 cal air rifle, SN: H128990. Brass barrel and air tube. Missing safety lever, front sight and barrel need to be re-soldered. Holds air. Stock and forend/pump are in great condition. (2) Model 312, black barrel and air tube. stock is in good condition with minor scratches and dings.

Vintage, receiver-mounted fixed-power target and benchrest rifle scope produced from roughly 1974 to 1984. Fixed 20-power, 1' tube diameter: 1/8 MOA clicks, fine crosshair reticle. Aluminum Panda big bore rings, 3.500 between rings. With original red case & lens caps. Excellent condition. Also included is a vintage adjustable Wards spotting scope, very clear optics, some scratches & scuffs, no tripod. Comes in Al Freeland fleece lined case.

lot of three quality Japanese knives. Manufactured in Seki City, Japan, VG-10 San Mai (3 layer) steel. Includes 1) Master Tanto, 6' blade with Tanto point, 3/16' thick blade, Kray-Ex (rubberized, textured grip), solid steel guard matching the steel pommel. Black leather scabbard. Blade ricasso marked "Japan". New in original box. 2) Tai-Pan, 71/2' Vg-1 san Mai steel spear-point blade, 3/16' thick blade, Kray-Ex (rubberized, textured grip), solid polished steel guard matching the steel pommel. Black leather scabbard. Blade ricasso marked "Japan". New in original box. 3) Magnum Tanto, 9' blade, circa 1980's with "400 Series Stainless steel blade. Kray-Ex (rubberized, textured grip), solid polished steel guard matching the steel pommel. Black leather scabbard. Blade ricasso marked "Japan". New in original box.

1) Cold Steel Warrior Series (Wakazashi) 88BW sword, 21" 1055 carbon steel blade, 29 1/2' overall Length, 8 1/2" Samé (Ray Skin) handle w/ black braid & brass Menuki, black Lacquered Wood scabbard and blue bag cover. New in box. 2) Cold Steel 88BT Warrior series O Tanto. 5/16" blade thickness, 13-1/4" 1060 Carbon steel blade. 19 1/4' overall, Samé (Ray Skin) handle with black braid cord and brass Menuki. Black lacquered wood scabbard with blue bag cover. New in original box. 3) Cold Steel Magnum Tanto XII, 12' Vg-10 San Mai blade, 3/16' thickness, Kray-Ex (rubberized, textured grip), solid steel guard matching the steel pommel. Black leather scabbard. Blade ricasso marked "Japan". New/Excellent condition.

Lot of two Cold Steel knives. Includes 1) Cold Steel Magnum Tanto XII, Manufactured in Seki City, Japan, San Mai (3 layer) steel, 12' Vg-10 San Mai blade, 3/16' thickness, Kray-Ex (rubberized, textured grip), solid steel guard matching the steel pommel. Black leather scabbard. Blade ricasso marked "Japan". New/Excellent condition in box. 2) Cold Steel OSS Chinese manufactured fighting knife. 8-1/4" Japanese AUS8A Stainless blade with clip point Handle, 5-1/8" Kray-Ex handle, 13-3/8" overall, Secure-Ex black polymer sheath. New in box.

Two items total. Includes 1) Cold Steel Black Bear Classic. Early version manufactured in Seki, Japan, by the legendary master knife maker Hattori. These are highly collectible and command a premium. Sub-hilt fighting knife features a black linen Micarta handle with six SS pins and is stamped "Japan," 8 1/4' AUS 8A Japanese stainless steel clip-point blade Black leather sheath with sharpening stone. Condition is new in box. 2) Cold Steel R1 Military Classic combat knife. 7' clip-point blade is made from VG-1 San Mai III and is 3/16" thick. Milled from a single piece of rust-resistant 300 series stainless steel. Heavy-duty brown leather belt sheath that included a small pocket with a Norton Fine India sharpening stone. Like new in box.

Three Items Total. Includes: 1) Browning Wihongi Signature Fixed Blade Dagger In Unopened Package, 5.85' double-edged spear-point blade with Maori warrior motifs, G-10 grip scales. 2) Victorinox Tinker Swiss Army knife multipurpose, 12 function Pocketknife. in original box. 3) Vintage Victorinox Switzerland Swiss Army multi-tool knife Officier Suisse. Circa 1980's, with black leather case. All knives are in new condition.

Three Total. Includes 1) 29' Douglas fluted stainless steel barrel with recessed crown. Chambered in 6mm Tierney, excellent condition, still in shipping tube. 2) 23 1/4" stainless steel heavy barrel by H.G. Baucher, drilled/tapped for front sight, (no filler screws), recessed crown. Marked "H.G. Baucher" and ".308-Win.-SP". It appears these markings have some scratches over them, so please check with a competent gunsmith to confirm the caliber before attempting to fire. 3) 27 1/2' heavy stainless steel target barrel, marked R&R Designs with back-to-back R's. Drilled/tapped for sights. Unknown caliber, bore measures 0.293' (6.5 Grendel ?). Please check with a competent gunsmith to confirm the caliber before attempting to fire. All are in very good condition with excellent bores.

Both chambered in 30-06 Springfield. 1) Pre-64 24' heavy target, match blued barrel, has the specific clearance cutout machined on the right side of the breech to allow clearance for the large, external Mauser-style claw extractor. Has the standard Winchester factory markings on the left side of the barrel. Manufactured 1956, underside of the chamber stamped "30-06 56". Drilled/tapped for sights, no sights installed. Bore is excellent/bright, strong rifling. The blue is overall very good with some scattered light patina. 2) Pre-64 24' blued barrel, has the specific clearance cutout machined on the right side of the breech to allow clearance for the large, external Mauser-style claw extractor. Has the standard Winchester factory markings on the left side of the barrel. Manufactured 1953, underside of the chamber stamped "1C06 53". ramped, dovetailed front sight base with base for installed, rear sight base installed forward of chamber and steel insert installed in rear dovetail . Bore is excellent/bright, strong rifling. The blue is overall very good with two patches of pitting at the right side muzzle.

National Match/Marksman stock is one-piece fiberglass bedded smooth walnut with beavertail forend, pistol grip, straight comb profile, accessory rail inlet to the forend, Al Freeland elongated aluminum forearm channel to 10'. Buttstock drilled for sling swivel, original Winchester serrated hard rubber buttplate. Stock is sound with no chips or cracks, has many minor scratches with some finish loss.

National Match/Marksman stock is one-piece fiberglass bedded smooth walnut with beavertail forend, pistol grip, straight comb profile, 4 1/4' steel accessory rail inletted in the forend, missing one screw. Buttstock inletted for 2 screw sling swivel base, no buttplate. Stock is sound with no chips or cracks, has some minor scratches/dings.

'Black Pearl', an American made single-action rimfire revolver chambered for .22 Long Rifle, and was manufactured in Bainbridge, GA. Revolver features a 6.5" black oxide round barrel with a 1:14 right-hand twist rate, fixed blade front sight, square notched top strap rear sight, smooth curved trigger, fluted black oxide 6-round cylinder, knurled cylinder pin head, bird's head style ejector rod button, matte black zinc alloy frame (Heritage states it's a black oxide finish), matte black zinc alloy trigger guard, external hammer with a checkered spur, manual safety on the left side of the hammer, and two-piece smooth polymer black pearl grips. The original black finish retained is approximately 96% with light handling blemishes mostly on the frame, and the loading gate is turning a red/orange color. Metal displays no deformation, but the barrel spots of oxidative speckling. The bore is bright, but the bore and cylinder chambers show machining defects that may be from tool chatter (it visually looks like smooth ribs and vibration marks). The action is smooth and crisp, with a tight lock-up. The grip polymer is in good condition with handling wear. Revolver includes the original factory cardboard box with end label. Condition is NRA Good. ***Modern Firearm***

Brazilian made semi-automatic striker fired compact pistol chambered for 9x19mm Luger. The Taurus GX4 Carry was introduced in 2023, and the product SKU is '1-GX4CR941'. Pistol features a stainless steel insert (serialized firearm) with full-length guide rails, alloy steel slide with a matte black gas nitride finish, bull-nosed slide with front and rear serrations, full-length metal guide rod assembly with dual captured recoil springs, a 3.7" stainless steel barrel with a 1:10" twist rate and a satin black DLC (Diamond-like carbon) finish, loaded chamber view-port, fixed blade front sight with a white dot, dovetailed serrated square notched rear sight, flat-faced trigger with an integral serrated blade safety, striker block, serrated slide stop, reversible magazine release, 'Easy Take-Down Pin' for disassembly (needs a slotted screwdriver), picatinny accessory rail on the dust cover, black polymer grip module with granular texturing and a single finger bump, undercut trigger guard, and interchangeable backstraps. The original matte black finish retained is approximately 99% with nothing remarkable. Metal displays no rust, or deformation. Bore is bright with strong rifling, and the frame polymer is in excellent condition with little to speak of. The action is smooth and crisp. Pistol includes the original factory black plastic foam-lined hard case, two magazines total, two extra backstraps, and instruction manual. Condition is NRA Excellent - Like New. ***Modern Firearm***

Fiberglass bedded laminated wooden, ported Benchrest rifle stock. 2 1/2' beavertail forearm with 12 1/2' aluminum accessory rail, adjustable comb with cheek rest, comb grooved for bolt action, oversized, textured grip with palm swell, aluminum adjustable buttplate with Pachmayr rubber recoil pad. 1 3/8' heavy barrel channel. Center-to-Center measurement between the action screws is 4 7/8",would fit a Savage Axis action. Very good condition.

Winchester Model 12 Pigeon Grade 3 Barrel Shotgun Set presentation case. Nice hinged wooden case with brass hardware/keys, red velvet lined case. Form fitted for shotgun with 26' barrel, 28' barrel and 30' barrel. Made by the "Gun Makers Cabinet", Liverpool, NY. Excellent condition. Comes in shipping box.

SN: UF3911. parts include blued receiver with trigger, lever & internal parts, 'Freeland' style shoulder stock, grips with palm swell, contoured behind the pistol grip thumb rest, dished Monte Carlo style cheekpiece, the comb is grooved to allow passage for a cleaning rod. two-piece 'beaver-tail' forearm with metal fittings and inletted accessory rail, custom Hart 29' stainless steel heavy barrel with adjustable globe sight base, drilled/tapped for sights. Parts are new, receiver is missing the side screws. NRA Condition-Excellent. Modern Firearm.

NOTE* Parts/Repair rifle. This is a custom Single-shot target rifle built on a Remington Model 40-X action. features a 25' heavy stainless steel barrel with no provisions for sights. Receiver drilled/tapped for optics, bolt release, manual safety removed. High gloss stock with White-Line buttplate, beavertail forearm. The barrel is not marked with the caliber, but it chambers and ejects a .222 Remington cartridge flawlessly, but please have it gauged by a competent gunsmith before attempting to fire it. Comes with complete Remington bolt, triggerguard with one screw, trigger and a couple of other internal parts. The bore is excellent/bright, stock is good/sound with minor scratches/edge wear and the finishes are very good. NRA Condition-Fair/Missing Parts. Modern Firearm.

Stainless steel unfinished parts for a magazine-fed semi-automatic pistol, similar in design to the Intratec TEC-22 Scorpion with a receiver similar to a 10/22, receiver needs to be drilled/tapped for barrel. Includes the frame with internal parts, bolt with firing pin & extractor, 25 round steel, spine stamped magazine, similar to the type used in Armi Jager rifles and a bag of internal parts including the trigger, springs, etc. NRA Condition-Fair. Modern Firearm.

Brazilian made semi-automatic hammer-fired single and double-action compact pistol chambered for 9x19mm Luger. The TH9c was introduced in 2018 as a compact version of the TH9 (SKU '1-TH9C0310'). Pistol features a two-toned finish with a matte black slide and an Olive Drab Green (ODG) frame, alloy steel slide with rear cocking serrations, full-length guide rod assembly with dual captive recoil springs, a 3.54" satin stainless steel barrel with a 1:10 right-hand twist rate, dovetailed blade front sight with a white dot, dovetailed square notched Novak's rear sight with two white dots, smooth curved trigger, external hammer with a serrated spur, checkered ambidextrous magazine release, firing pin block safety, serrated frame mounted manual safety, loaded chamber indicator, serrated slide stop, granular textured ODG frame with finger grooves, beveled magazine well, undercut trigger guard, extended beavertail, and a picatinny accessory rail on the dust cover. The original matte black slide finish retained is approximately 99% with superficial blemishes. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. The frame polymer is in excellent condition with little to speak of. Pistol includes the original black plastic factory foam-lined hard case with end label, instruction manual, cable lock, and two magazines total. Condition is NRA Excellent. ***Modern Firearm***

#TG019-22C08508 Turkish made striker-fired semi-automatic compact pistol chambered for 9x19mm Luger, and imported by Buffalo Cartridge Company out of Findlay, OH. The BRG9 Elite was introduced at SHOT Show in 2022 (SKU is 'BRG9E4111'). Pistol features a matte black finished slide, front and rear slide serrations, full-length metal guide rod assembly with dual captive recoil springs, forged 4” 4340 steel dual heat-treated barrel, fixed blade front sight with an orange dot, dovetailed square notched rear sight with two white dots, ambidextrous annular cut magazine release, loaded chamber indicator on the top of the slide, serrated 7075-T6 aluminum slide plate, striker status indicator on the slide plate, smooth straight faced trigger with an integral blade safety, smooth grip safety, serrated Perfect-Touch slide stop, serrated take-down lever, accepts double stack 16-round magazines, picatinny accessory rail on the dust cover, undercut trigger guard, beveled magazine well, serrated front trigger guard, black polymer frame with a granular and circular textured grip and BRG trademarks on both sides, and interchangeable backstraps. The original matte black finish retained is approximately 96% with light scratches, and minor handling blemishes. Metal displays no deformation, but there is a small amount of oxidation around the rear sight. Bore is bright with strong rifling, and the action is smooth and crisp. The frame polymer is in excellent condition with a small amount of deformation at the front of the trigger guard from accessory mounting. Pistol includes the original factory black plastic foam-lined hard case with end label, two additional back straps, two magazines total, cleaning tools, gun oil, and a magazine speed loader. Condition is NRA Good. ***Modern Firearm***

Turkish made semi-auto striker fired sub-compact pistol chambered for 9x19mm Luger, and imported by Century Arms Inc. out of Georgia, VT. Launched in 2019, the TP9 Elite SC was developed to be the first sub-compact version of the TP Series of pistols. Pistol features a matte black nitride slide finish, optics cut steel slide with front and rear cocking serrations, full-length guide rod assembly with dual captive recoil springs, 3.6" match grade barrel with nitride finish, dovetailed blade front sight with a white dot, granular textured grip side-panels with small square texturing on the front and back straps, serrated ambidextrous slide stop, serrated smooth curved safety trigger, serrated take-down lever, loaded chamber indicator on the top of the slide, striker status indicator on the slide plate, and a picatinny accessory rail on the dust cover. The original matte black finish retained is approximately 99% with nothing remarkable. Metal displays no deformation, or rust. Bore is bright with strong rifling, and the action is smooth and crisp. The frame polymer is in excellent condition with little to speak of. Pistol includes the original factory foam-lined hard case, owners manual, one extra back strap, one extra flat floor plate, optics mounting hardware, cleaning tools, two magazines total, trigger lock, and kydex paddle holster. The optic mounting platform is compatible with Shield RMSc, CANiK ONYXc, and CANiK PHANTOMc optics. Condition is NRA Excellent - Like New. ***Modern Firearm***

"Model 1103", an American made semi-automatic rimfire rifle chambered in .22 Long Rifle, and manufactured circa 2025 in Newport, NH. Rifle features a blued barrel finish, a black aluminum receiver finish, an approximately 18.5" cold hammer-forged barrel, brass beaded blade front sight, folding adjustable rear sight, serrated curved trigger, accepts detachable rotary style magazines, extended magazine release, annular cut trigger guard mounted cross-bolt safety, manual bolt hold-open, receiver drilled and tapped for optic mounting, smooth curved charging handle, 'Ruger' engraved bolt, and polymer trigger housing. Furniture consists of a smooth hardwood semi-pistol grip shoulder stock, smooth forend, black polymer barrel band, and a smooth black contoured plastic butt plate. The original blued finish retained is approximately 99% with nothing remarkable. The black aluminum receiver finish retained is approximately 99%, and in like new condition. Metal displays no rust, or deformation. Bore is bright with strong rifling, and the action is smooth and crisp. Furniture wood is in excellent condition with little to speak of. Rifle includes the original factory cardboard box with end label, one magazine total, instruction manual, stickers, optics rail with hardware, and a cable lock. Condition is NRA Excellent - Like New. ***Modern Firearm***

"Model 01256", an American made semi-automatic rimfire rifle chambered in .22 Long Rifle, and manufactured circa 2022 in Newport, NH. Rifle features a satin stainless steel barrel finish, a brushed aluminum receiver finish, an approximately 18.5" cold hammer-forged barrel, brass beaded blade front sight, folding adjustable rear sight, serrated curved trigger, accepts detachable rotary style magazines, extended magazine release, annular cut trigger guard mounted cross-bolt safety, manual bolt hold-open, receiver drilled and tapped for optic mounting, smooth curved charging handle, 'Ruger' engraved bolt, and polymer trigger housing. Furniture consists of a black polymer semi-pistol grip shoulder stock with checkering at the wrist, checkered forend, black polymer barrel band, sling swivel stud at the bottom of the shoulder stock and at the front of the forend, Ruger trademarked grip cap, and a curved checkered black plastic butt plate. The original satin stainless steel finish retained is approximately 99% with nothing remarkable. The brushed aluminum receiver finish retained is approximately 99%, and in like-new condition. Metal displays no rust, or deformation. Bore is bright with strong rifling, and the action is smooth and crisp. Furniture polymer is in excellent condition with little to speak of. Rifle includes the original factory cardboard box with end label, one magazine total, instruction manual, stickers, optics rail with hardware, and a cable lock. Condition is NRA Excellent - Like New. ***Modern Firearm***

"Model 31210", an American made semi-automatic rimfire rifle chambered in .22 Long Rifle, and manufactured circa 2024 in Newport, NH. Rifle features a blued barrel finish, a black aluminum receiver finish, an approximately 18.5" cold hammer-forged barrel with a target crown, no provisions for iron sights, serrated curved trigger, accepts detachable rotary style magazines, extended magazine release, annular cut trigger guard mounted cross-bolt safety, manual bolt hold-open, receiver drilled and tapped for optic mounting, optics rail installed on the top of the receiver, smooth curved charging handle, 'Ruger' engraved bolt, and polymer trigger housing. Furniture consists of a black polymer semi-pistol grip shoulder stock with checkering at the wrist, checkered forend with a sling stud at the front, sling stud at the bottom of the shoulder stock, black polymer barrel band, Ruger phoenix trademarked grip cap, and a checkered black plastic butt plate with a Ruger phoenix trademark. The original blued finish retained is approximately 99% with nothing remarkable. The black aluminum receiver finish retained is approximately 99%, and in like-new condition. Metal displays no rust, or deformation. Bore is bright with strong rifling, and the action is smooth and crisp. Furniture polymer is in excellent condition with little to speak of. Rifle includes the original factory cardboard box with end label, one magazine total, instruction manual, stickers, and a cable lock. Condition is NRA Excellent - Like New. ***Modern Firearm***

American made double-barrel single-action derringer style pistol chambered for .41 Rimfire Short, and manufactured in Ilion, NY. The Remington Model 95 was in production from 1866 until 1935, and the Type II was manufactured circa 1888-1911. Pistol features a blued finish, 3" double over and under barrels with a top rib, fixed blade front sight, 'U' notched rear sight at the barrel hinge, smooth curved spur trigger, checkered manual shell extractor on the left side of the barrels, automatic barrel selector, external hammer with a checkered spur, barrel locking lever on the right side of the frame, smooth grip straps, and two-piece smooth hardwood grips (typically walnut or rosewood). 'REMINGTON ARMS CO. ILION, N.Y.' is marked on the barrel rib. The original blued finish retained is approximately 20% with a dark gray-brown patina. Metal displays some light oxidation at the barrel hinge with light areas on the barrels, and a couple small specks in the bore. The metal also shows scattered pin-prick pitting. Bores show decent rifling with some peppering, and the action is smooth and crisp. The grip wood is in very good condition with a few minor handling marks. The barrel hinge has been repaird to the extent that the action opens and closes, but there is still missing material. Condition is NRA Poor. ***Modern Firearm - C&R Eligible***

German made semi-automatic striker-fired blowback operated pistol chambered for 6.35mm (.25 Automatic Colt Pistol), and there are no importation marks. The Deutsche Werke Ortgies pistols were designed by German gunsmith Carl August Brauning, and approximately 400,000 were produced from 1919 until 1923. Pistol features a blued finish on a forged and machined construction, rear slide cocking serrations, an approximately 2-3/4" barrel, low-profile fixed round blade front sight integral to the slide, fixed low-profile 'U' notched rear sight integral to the slide, solid smooth curved trigger, serrated heel mounted magazine release, smooth grip straps, smooth grip safety, annular cut grip safety release, and two-piece smooth hardwood grips with gold-toned Ortgies medallions on both panels. The original blued finish retained is approximately 25% with some edge wear, and the finish taking on a dark gray/brown patina. Metal displays no deformation, but there are a few areas of light oxidation. The action is smooth and crisp, and the bore shows strong rifling, but appears to be dirty. The grip wood is in good condition with handling blemishes, and some chipping on the left grip panel. The grips fit a little loose. Condition is NRA Fair. ***Modern Firearm - C&R Eligible***

American made magazine fed repeating bolt-action shotgun chambered for 2-3/4" 16 Gauge shotshells. The Westernfield Model 30 is a Montgomery Ward department store brand shotgun produced by Stevens. It is a close copy of the Stevens 58, but with a fixed 2-round magazine. The Stevens Model 58 was in production from 1933 until 1966, and it is assumed that this shotgun was in production in that same time period. Shotgun features a blued finish, an approximately 28" round barrel integral to the receiver, fixed choke measures 'Full' with a drop-in gauge, steel bead front sight, serrated curved trigger, turned down and swept back collard bolt handle, smooth safety tab at the rear of the receiver, and a metal trigger guard. The hardwood furniture consists of a smooth semi-pistol gripped shoulder stock, smooth forend, 14-1/2" length-of-pull, and a brown ventilated rubber recoil pad. The original blued finish retained is approximately 88% with edge wear, handling blemishes, and some general thinning. There are a couple of very subtle dents in the barrel, and there is sparse oxidative speckling on the shotguns entirety. The action is smooth and crisp, and the bore is bright and shiny. The furniture wood is in good condition with handling marks, thinning finish, and some edge wear around the edge of the grip. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

American made single-shot break-action shotgun chambered for 3" 12 Gauge shotshells, and manufactured in Westernfield, MA. The Stevens Model 9478 was produced between 1978 and 1985. Shotgun features a blued finish, color-case hardened receiver, a 28" round barrel, fixed choke measures 'Improved Modified' with a drop-in gauge, silver bead front sight, automatic ejector, smooth curved beveled trigger, inertia firing pin, plastic trigger guard with a plastic serrated action lever at the front, an a external hammer with a serrated spur. The hardwood furniture consists of a smooth semi-pistol grip shoulder stock, semi-beavertail forend, 14" length-of-pull, and a serrated black plastic butt plate. The original blued finish retained is approximately 99% with only superficial handling blemishes. The original color-case finish retained is approximately 99% with almost all of its brilliant colors intact. Metal displays no deformation, but there are a few light spots of oxidation along the barrel, and fine speckling on the receiver. Action is smooth and crisp, and the action opens very slowly under its own weight. The bore is bright and shiny. The wood furniture is in excellent condition with a few very light handling blemishes. The exact date of manufacture cannot be determined. Condition is NRA Good. ***Modern Firearm***

American made single-shot break-action shotgun chambered for 2-3/4" 20 Gauge shotshells. The Model 37 Single-Shot was manufactured between 1936 and 1963, with 1,015,000 shotguns produced. The Model 37's were manufactured without date stamps, or serial numbers. Shotgun features a blued finish, a 28" round barrel, the fixed choke measures 'Improved Modified' with a drop-in gauge, silver bead front sight, smooth curved trigger, shell ejector, external hammer with a serrated spur, checkered top lever, and a stamped metal trigger guard. The hardwood furniture consists of a smooth semi-pistol gripped shoulder stock, smooth forend, 14" length-of-pull, and a checkered black plastic Winchester butt plate. The original blued finish retained is approximately 95% with light scratches, minor edge wear, carry wear on the bottom of the receiver, and the metal taking on a brown patina. Metal displays a slightly dented trigger guard, and minor deformation in a trigger guard screw slot. Light oxidative speckling was also observed on this shotgun. Furniture wood is in very good condition considering its age with a few minor dings and blemishes. The barrel falls quickly under its own weight with a tight locks-up, and the top lever rests to the right of the tangs centerline. The bore is bright and shiny, but it is a little dirty. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

Russian made and sporterized military bolt-action centerfire carbine chambered for 7.62x54R ammunition, and the barrel is dated 1944. Imported by Century Arms International out of Georgia, VT. Carbine features a blued refinish, receiver drilled and tapped for optic mounting, single-piece optic mounting rail installed onto the receiver, stripper clip guides cut into the receiver, a 20" barrel, protected post front sight, tangent rear sight removed, smooth curved trigger, machined trigger guard, hinged magazine floorplate, magazine floorplate latch in front of the trigger guard, knurled cocking piece manual safety, turned down and swept back bolt handle (aftermarket bolt and weld), and a folding spike bayonet lug. The black synthetic furniture consists of a semi-pistol gripped Monte Carlo style stock with checkering at the wrist, right-hand cheek weld, checkered forend, sling swivel studs on the bottom of the shoulder stock and forend, checkered black plastic grip cap, and a checkered solid black rubber recoil pad. Serial numbers, 'RM428', match on barrel shank, floorplate, and on the modified bolt. The blued finish retained is approximately 97% with light edge wear, and minor handling blemishes. Metal displays extra holes drilled into the rear sight base, and grinding marks on the bolt handle. Light oxidation was observed on the barrel, and on some of the other components. Action is smooth and crisp, and the bore is bright with strong rifling. The furniture polymer is in very good condition with light handling marks. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

American made slide-action repeating shotgun chambered for 2-3/4" 20 Gauge shotshells. The Model 1200 'Field Grade' was in production from 1964 until 1981, and was meant to replace the more expensive Model 12. Shotgun features a blued finish, a 28" round barrel, steel bead front sight, the fixed choke measures 'Improved Cylinder' with a drop-in gauge, half-length tube magazine under the barrel, serrated magazine tube cap, smooth curved trigger with beveled edges, aluminum trigger guard, annular cut push-button safety at the front of the trigger guard, and a black finished aluminum receiver. The walnut furniture consists of a semi-pistol gripped shoulder stock with press-checkering at the wrist, press-checkered slide handle, steel black grip cap with a red Winchester trademark, 14" length-of-pull, and a ventilated Winchester red rubber recoil pad with white and black spacers. The original black finish retained is approximately 98% with minor scratches on the bottom of the trigger guard, light muzzle wear, and contact wear from the slide. Metal displays no deformation, but there is sparse oxidative speckling along the barrel. Action is smooth and crisp. The bore is smooth, but appears dirty. The furniture wood is in near excellent condition with superficial handling blemishes, and a couple of scuffs on the right side of the slide handle. The exact date of manufacture cannot be determined. Condition is NRA Good. ***Modern Firearm***

Chinese made Nitro Piston break barrel air rifle chambered for .177 Caliber pellet. Rifle produces velocities up to 1200 feet per second when utilizing a high speed alloy pellet, and 1000 fps using a lead pellet. Rifle features a blued finish, dovetailed optics rail on top of the receiver, a 18-1/2" barrel, no provision for iron sights, serrated curved trigger, and a manual paddle safety in the trigger guard. The black synthetic furniture consists of a bead textured semi-pistol gripped shoulder stock with a solid black rubber recoil pad. The metal displays no rust, or deformation, and the finish is in excellent condition. The furniture polymer is in excellent condition with superficial handling marks, and the bore is bright with strong rifling. A Center Point 4x32mm scope with windage and bullet-drop compensation is mounted to the receiver using two-piece 1" rings. The scope's sight picture is clear and bright.

Chinese made break barrel air rifle chambered for .177 Caliber pellet. Rifle produces velocities up to 1000 feet per second. Rifle features a blued finish, dovetailed optics rail on top of the receiver, a 18-3/4" barrel, raised green fiber optic front sight, fully adjustable red fiber optic rear sight, smooth curved trigger, and a manual paddle safety in the trigger guard. The wood furniture consists of a smooth semi-pistol gripped shoulder stock with a solid black rubber recoil pad. The metal displays no rust or deformation, and the finish is in excellent condition. The furniture wood has a few handling blemishes, and the bore is bright with strong rifling.

American made magazine fed semi-automatic carbine chambered for 9x19mm Luger, and manufactured in Mansfield, OH. by Beemiller Inc. Rifle features a black finish, factory installed receiver optics rail, a 16.5" shrouded barrel, elevation adjustable protected post front sight, no installed rear sight, knurled left side charging handle/bolt hold-open, skeletonized smooth curved polymer trigger, checkered receiver mounted manual safety on the left side, annular cut push-button magazine release, serrated recessed forend, and a smooth black synthetic pistol grip shoulder stock. The original black finish retained is approximately 97% with light handling blemishes, minor edge wear, and some small scratches at the muzzle. Metal displays no deformation, but there is a spot of oxidation on the front sight hood. Action is smooth and crisp, and the bore is bright with strong rifling. the furniture polymer is in good condition with light handling marks, small nicks, and some seam splitting. Rifle includes one magazine total. Condition is NRA Good. ***Modern Firearm***

#ns411770 'Maxx', an American made semi-automatic gas impingement modern sporting pistol chambered for .300 AAC Blackout, and manufactured in Summerville, SC. The American Tactical Omni Hybrid Maxx was introduced in 2015, and it is considered a braced pistol. Pistol features matte black polymer receivers, flat-top picatinny upper receiver, an 8-1/2" black nitride barrel with a 1:8" twist rate, threaded muzzle with an A2 bird cage style flash suppressor installed, smooth curved single-stage trigger with anti-walk axis pins, low-profile gas block, 7" aluminum M-Lok handguard with a T-marked picatinny top rail, pistol length gas system, M16 style bolt carrier with a staked gas key, spring loaded dust cover, shell deflector, annular cut bolt assist, annular cut push-button magazine release, serrated paddle bolt release, serrated receiver mounted manual safety, standard charging handle, two sling loops on the receiver end plate, pistol receiver extension with a standard buffer and spring, checkered black A2 style pistol grip with a single finger groove and backstrap serrations, integral oversized trigger guard, flared magazine well, and a black Trinity Force Breach Blade 1.0 pistol brace with sling slots. The original matte black anodized aluminum finish retained is approximately 99% with only superficial handling blemishes. The black polymer condition retained is approximately 99% with nothing remarkable. Metal displays no rust, or deformation. Action is smooth and crisp, and the bore is bright with strong rifling. Condition is NRA Excellent. ***Modern Firearm***

Includes: M122A1 tripod, T&A, and pintle adapter. With some minor oxidation, the condition of this item is good.

Pair of Spanish Jukar single-shot percussion pistols. Both locks marked "Derringer Philadelphia" , 3 1/4' octagonal barrels, one piece wood stocks with brass plated fittings. The two-cock hammer actions on both pistols are crisp/tight, the wood is very good with no chips/cracks and the bores are very good with strong rifling. NRA Condition-Very Good. Antique Firearms.

This lot consists of a factory-original FN SCAR 16S barrel assembly chambered for 5.56x45mm NATO. The barrel assembly features a 16" chrome-lined cold hammer-forged barrel with a 1:7 twist rate, 1/2"-28 TPI muzzle threads (no muzzle device), fully protected elevation adjustable folding front sight, gas block assembly, gas regulator, gas piston, and a picatinny accessory rail. This is a ready-to-install unit. The original finish retained is approximately 96% with light handling blemishes along the barrel, and light scratches and mounting marks on the accessory rail. Metal displays no deformation, but there is a single light spot of oxidation on the barrel. There is also a small amount of oxidation on the barrel threads. Bore is bright with strong rifling. The overall condition is good.

'Rancher', an American made single-action rimfire revolver rifle chambered for .22 Long Rifle (interchangeable cylinder capability), and was manufactured in Bainbridge, GA. The Heritage Rough Rider was introduced in 1992 as part of Heritage Manufacturing's line of cowboy-style single-action firearms. Revolver features a 16.12" black oxide round barrel with a 1:16" right-hand twist rate, fixed blade front sight, elevation adjustable sporting rear sight, smooth curved trigger, fluted and floral engraved black oxide 6-round cylinder, knurled cylinder pin head, bird's head style ejector rod button, matte black zinc alloy frame (Heritage states it's a black oxide finish), matte black zinc alloy spur trigger guard, external hammer with a checkered spur, manual safety on the left side of the hammer, checkered black factory butt plate, and a straight gripped walnut shoulder stock with checkering at the wrist. The original black finish retained is approximately 95% with minor edge wear, pin-head size nicks, and an imperfect finish on the zinc alloy components. Metal displays no deformation, but there is light oxidative speckling on most parts. The bore is bright with strong rifling, and the cylinder chambers show what could be machine chatter marks. The action is smooth and crisp with a tight lock-up. The furniture wood is in good condition with with light scratches, and some dings. Revolver rifle includes a brown leather sling. Condition is NRA Good. ***Modern Firearm***

American made pump-action shotgun chambered for 2-3/4" 12 Gauge shotshells, and manufactured in Chicopee Falls, MA. The Stevens Model 820B was produced between 1949 and 1963. Shotgun features a blued finish, a cut-down 18" round barrel, bore measures 'Cylinder' with a drop-in gauge, smooth curved trigger, annular cut cross-bolt manual safety at the front of the trigger guard, 3/4 length magazine tube, single action bar, and serrated slide release. The refinished hardwood furniture consists of a smooth semi-pistol gripped shoulder stock, grooved corn-cob style slide handle, 13" length-of-pull, and butt plate screws with no butt plate. The blued finish retained is approximately 85% with light scattered scratches, edge wear, thinning, contact wear from the slide handle, and the metal taking on a brown patina. Metal displays oxidative speckling, and there is minor deformation in some of the screw slots. The refinished hardwood furniture is in fair condition with light scattered scratches and dings, a split behind the receiver, and it needs a butt plate. The action is smooth and crisp, and the bore is smooth with some light peppering. Condition is NRA Fair. ***Modern Firearm - C&R Eligible***

American made semi-automatic blowback operated pistol caliber carbine chambered for .40 Smith & Wesson, and manufactured in Washington. Carbine features a matte black finish, forged flat-top upper receiver with integral Picatinny optics rail, a 416 stainless steel 16" button rifled barrel with a 1:16" twist rate, slotted flash hider, a-frame front sight base with a protected elevation adjustable post, smooth curved single-stage trigger, serrated receiver mounted manual safety, serrated paddle bolt release, spring loaded dust cover, shell deflector, annular cut bolt assist, accepts Glock magazines, popsicle stick style magazine release, aluminum handguard with a picatinny quad-rail, polymer angled foregrip, checkered A2 style pistol grip, six-position receiver extension, collapsible M4 style buttstock with the sling swivel removed, and a bayonet lug and sling swivel on the bottom of the front sight base. A Panorama red dot optic is mounted on top of the receiver. The original matte black finish retained is approximately 97% with light handling blemishes, and edge wear. Metal displays no deformation, but there is a light oxidative dusting on the front sight base. The action is smooth and crisp, and the bore is bright with strong rifling. The polymer furniture is in excellent condition with no marks, but the butt stock latch utilizes a magazine release button in its construction. The red dot optic functions. Carbine includes one magazine total. Condition is NRA Good. ***Modern Firearm***

Includes: M122A1 tripod, M2 T&E and pintle adapter. With some minor oxidation, the condition of this item is good.

This scope features a duplex reticle, 1" tube, and a matte black finish. The redesigned Leupold VX-3 Rifle Scope features a Quantum Optical System with Xtended Twilight lens technology. This technology targets the light spectrum that is present during the twilight hours. A protective Diamondcoat 2 lens coating provides abrasion resistance, and the lenses are edge-blackened to improve resolution by reducing glare. The twin spring erector has cryogenically treated adjustments to provide more precision, and more holding force. The Leupold VX-3 rifle scope is water, fog, and shockproof. It is also purged with second generation argon/krypton gas. The scope's sight picture is clear and bright. Scope includes the original foam-lined cardboard box.

This scope features a duplex reticle, and a gloss black finish. The redesigned Leupold VX-3 Rifle Scope features a Quantum Optical System with Xtended Twilight lens technology. This technology targets the light spectrum that is present during the twilight hours. A protective Diamondcoat 2 lens coating provides abrasion resistance, and the lenses are edge-blackened to improve resolution by reducing glare. The twin spring erector has cryogenically treated adjustments to provide more precision, and more holding force. The Leupold VX-3 rifle scope is water, fog, and shockproof. It is also purged with second generation argon/krypton gas. This scope includes a 7-1/2" AR-15 carry handle optics rail with two-piece 1" rings. The scope's sight picture is clear and bright.

High-quality spotting scope designed for hunting, bird watching, and photography. The Leupold Gold Ring 30x60mm spotting scope is a rubberized straight body design with a multi-coated lens. It has a maximum magnification of 30x, and an objective lens diameter of 60mm. This spotting scope offers clear and detailed views from as close as 20 ft. The condition is excellent with a bright and clear sight picture, and the scope is the only item in this lot.

This lot includes two knives as follows. 1) Buck 650 Nighthawk: This knife features a matte black oxide finish, a fixed 6-1/2" 420HC stainless steel blade, modified clip point blade profile, false top edge, black rubberized pebble textured grip, .235" blade stock and 1.239" blade depth, and a hidden tang construction. This knife includes a black nylon sheath. The handle is in excellent condition, and the blade has superficial handling blemishes. 2) U.S. M7 Bayonet: The M7 bayonet is very similar to the M4 bayonet but with a larger muzzle ring. The M7 features a two-lever locking mechanism, a 6-3/4" 1095 carbon steel blade, full-length sharpened blade on one side and 3" sharpened opposing blade, checkered black plastic grips, and a parkerized finish. Bayonet includes an unmarked black polymer scabbard with a nylon belt loop, and an M1910 bent wire hook. This knife is in excellent condition showing minor handling blemishes and a little edge wear.

American made vintage tube-fed bolt-action rimfire rifle chambered for .22 Short, Long, and Long Rifle. Manufactured in Chicopee Falls, MA. This rifle is pre-1968 in its manufacture because there is no serial number present. The 'Chicopee Falls' address line corresponds to a 1938-1960 period of production. Rifle features a blued finish, optics mounting dovetail on top of the receiver, a 24" barrel, 3/4 length tubular magazine, dovetailed blade front sight, elevation adjustable sporting rear sight, smooth curved trigger, turned-down bolt handle, serrated sliding manual safety on the right receiver rail, and an aluminum trigger guard (missing one screw, the other does not look original). The hardwood furniture consists of a smooth semi-pistol gripped shoulder stock, smooth forend, and a serrated black plastic butt plate that does not fit the stock. A Marlin Micro-Vue fixed 4x scope with fine crosshairs is mounted to the receiver using two-piece 3/4" rings. The original blued finish retained is approximately 92% thinning around the rear of the receiver, light handling blemishes, and some muzzle wear. Metal displays no deformation, but there is light scattered oxidation on the metal components. Action is crisp but a little dry feeling, and the bore is bright with strong rifling. The furniture wood is in good condition with light handling marks, a scuff on the right side of the forend, and a few small spots of finish losses. The scope's sight picture is slightly hazy, and slightly yellow. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

American made bolt-action repeating shotgun chambered for 3" .410 Gauge shotshells, and manufactured in New Haven, CT. The Model 183D-B improvements included a firing pin design change, and this model was produced from the late 1940's until 1953. Shotgun features a blued finish, a 24" tapered barrel (length includes screw-on choke), knurled screw-on choke measures 'Improved Modified' with a drop-in gauge, steel bead front sight, serrated curved trigger, turned-down and swept-back bolt handle with a collard knob, serrated manual safety lever at the rear of the receiver, blind two-round magazine, black polymer finger grooved trigger guard, and a cocking indicator at the rear of the bolt. The gloss hardwood furniture consists of a smooth semi-pistol gripped shoulder stock, smooth schnabel forend, and a serrated black plastic butt plate. The original blued finish retained is approximately 45% with general thinning, and minor handling blemishes. Metal displays no deformation, but there is oxidation on the screw-on choke and butt plate screws. The action is smooth and crisp, and the bore is smooth and shiny (little dirty). The furniture wood is in very good to excellent condition with minor scratches and dings. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

'The Sportmaster,' an American made bolt-action rimfire rifle chambered for .22 Short, Long, and Long Rifle. The Remington 512 'Sportmaster' was produced from 1940 until 1962. Since there is no serial number this rifle, it was manufactured pre-1968. Rifle features a blued finish, receiver drilled and tapped for optic mounting, two-piece optic mounts installed onto the receiver, a 25" tapered barrel, dovetailed blade front sight with a silver-toned bead, elevation adjustable sporting rear sight, serrated curved color-case trigger, stamped trigger guard, turned-down and swept-back bolt handle, cocking status indicator at the rear of the bolt, 3/4 length tube magazine, serrated manual safety on the right side of the receiver. The hardwood furniture consists of a smooth semi-pistol gripped shoulder stock, smooth forend, and a checkered factory black plastic butt plate. The original blued finish retained is approximately 85% with light handling blemishes, edge wear, general thinning, and the finish taking on a brown patina. Metal displays no deformation, but there is very minor oxidation on the front sight blade, and on the butt plate screws. Action is smooth and crisp, and the bore is bright with strong rifling. The furniture wood is in good condition with dents & scratches, some thinning finish, and edge wear. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

Ruger American 'Predator' version bolt-action rifle. Features a 24" matte black, cold hammer-forged, tapered, threaded barrel with factory-installed thread protector, Accu-trigger, green polymer stock with grip cap & factory rubber recoil pad. Includes one detachable magazine, factory scope base installed, manufactured 2017. Bore is excellent, rifle is in like new condition. NRA Condition-Excellent. Modern Firearm.

Arsenal refinished Romanian Tokarev copy military pistol imported by CAI, Georgia VT. Features dark blued finish, approx 4.5" barrel, fixed sights, detachable magazine, manual safety on left side of frame, push button magazine release, lanyard loop, black plastic ribbed grips. Bore is very good/bright, strong rifling. Retains 95% arsenal re-finish with handling marks. Grips are very good condition. Original markings include 1953 date, matching serial numbers on slide & frame. Includes one magazine (marked "IT341"). NRA Condition-Very Good+. C&R Firearm.

Compact Semiautomatic pistol manufactured in Turkey, and imported by SDS, Knoxville, TN. Single/double action, ambi safety, 3.9' barrel, fixed two white dot sights, wide serrated trigger, matte black finish, serrated grip straps, checkered black plastic grips. Steel slide, alloy frame, 13-rd blue steel magazine with finger rest, The bore is excellent/bright, pistol is in like new condition. Comes with 3 spare magazines, (4) total, two flush, two with finger extensions, manual, cleaning gear, extra backstrap, and spare notch rear sight. NRA Condition-Excellent/Like New. Modern Firearm.

This scope features a duplex reticle, Multicoat4 fully multi-coated lens, second focal plane, 1" tube, and a matte black finish. The redesigned Leupold VX-3 Rifle Scope features a Quantum Optical System with Xtended Twilight lens technology. This technology targets the light spectrum that is present during the twilight hours. A protective DiamondCoat 2 lens coating provides abrasion resistance, and the lenses are edge-blackened to improve resolution by reducing glare. The twin spring erector has cryogenically treated adjustments to provide more precision, and more holding force. The Leupold VX-3 rifle scope is water, fog, and shockproof. This scope is new in the box with the original plastic wrapping.

American made slide-action repeating shotgun chambered for 2-3/4" 12 Gauge shotshells, and manufactured in Chicopee Falls, MA. The Savage Stevens Model 77B was produced from 1957 to 1968. This shotgun was definitely manufactured before 1968 because there are no serial numbers. Shotgun features a blued finish, a 24" round barrel with an adjustable Savage Super Choke, steel bead front sight, smooth curved trigger, annular cut push-button safety on the trigger guard, half-length magazine tube, single action bar, and a serrated bolt release at the front of the trigger guard. The hardwood furniture consists of a smooth semi-pistol gripped shoulder stock, corn cob style slide handle, 14-1/4" length-of-pull, and a red ventilated rubber recoil pad with a black spacer. The original blued finish retained is approximately 92% with minor thinning, light handling blemishes and scratches, and some contact wear on the magazine tube from the slide handle. Metal displays some extremely minor deformation in some of the screw slots, and there is sparse and light oxidative speckling. Action is smooth and crisp, and the bore is smooth and shiny. The hardwood furniture is in fair to good condition with thinning finish, and chipping and cracking at the rear of the receiver. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

Italian made replica of a Colt 1851 Navy black powder revolver, in 44 caliber, which is more properly the "Army" caliber. Manufactured in Italy by Pietta in 1997, imported CVA. Features blued/brass finish, case colored loading lever, hammer & trigger, 7.5" octagon barrel, loading lever under barrel, brass bead front sight, rear sight notch in hammer nose, brass grip strap, frame, round brass triggerguard, rebated cylinder with naval battle scene roll engraving. Bore is very good/bright, strong rifling, barrel & cylinder retain 90% blue, with handling/edge wear, scratches, case colors are are there, faded. Brass surfaces show a slight mellowing with scratches. Walnut grip is good/sound with minor scratches/dings. Comes in CVA factory box with matching label. Condition is NRA Very Good. Antique Firearm.

Italian bolt-action magazine fed repeating carbine chambered for 6.5x52mm ammunition. The Army Moschetto Modello 1938 carbine was adopted by the Fascist Army in 1938. Typically, the receiver ring is marked with Roman numerals indicating the date of manufacture by referencing the time since the Fascist Era started in Italy (1922). This receiver ring has been scrubbed. The barrel is stamped with "Beretta Gardone," and the serial number. Carbine features a blued finish, an 18" barrel, folding spike bayonet, dovetailed blade front sight, fixed 'V' notched rear sight, smooth curved trigger, integral box magazine, turned-down bolt handle, checkered manual safety on the bolt, and a knurled cocking piece. The hardwood furniture consists of a smooth straight gripped shoulder stock, smooth forend, smooth handguard, metal end cap with a sling loop, sling loop on the left side of the shoulder stock, and smooth metal buttplate with a storage compartment. The original serial number 'SX5102' match on the barrel, and stock. The original blued finish retained is approximately 92% with a little handling wear, edge wear, and the bayonet finish is taking on a plum color. Metal displays no deformation, but there are a couple of small oxidation spots. Action is smooth and crisp, and the bore is bright with strong rifling. The furniture wood is in very good condition for its age with normal handling marks. Carbine includes a brown leather sling. Condition is NRA Good. ***Modern Firearm - C&R Eligible***

American made pump-action shotgun chambered for 3" 12 Gauge shotshells, and manufactured in North Haven, CT. The Mossberg 500 was introduced in 1950, and is still produced today. This shotgun was likely produced in 2014, but this cannot be confirmed without contacting Mossberg. Shotgun features a matte black finish, aluminum receiver drilled & tapped for optic mounting, a ported 28" vent ribbed barrel, accepts choke tubes with an 'Improved Cylinder' choke installed, white bead front sight and a brass mid-bead, smooth curved gold-toned trigger, bolt release lever at the rear of the trigger guard, dual action bars, half-length magazine tube under barrel, knurled magazine tube cap, and a serrated sliding tang safety on the top of the receiver. The hardwood furniture consists of a semi-pistol gripped shoulder stock with checkering at the wrist, checkered and finger grooved slide handle, and a brown ventilated rubber recoil pad with a black spacer. The original matte black finish retained is approximately 96% with muzzle wear, and friction wear from the slide handle. Metal displays no deformation, or rust. Action is smooth and crisp, and the bore is smooth but dirty. The furniture wood is in very good condition with superficial handling marks, two small material transfers on the right side of the shoulder stock, and edge wear at the rear of the shoulder stock. Condition is NRA Very Good to Excellent. ***Modern Firearm***

Italian made mid-sized semi-automatic pistol chambered for .32 Automatic Colt Pistol, and manufactured circa 1980 ('AF' date code). Imported by Excam out of Hialeah, FL., the production of the Tangfolio GT32XEB began in the early 1980's, and continued until the late 1990's. Pistol features a blued finish, rear slide cocking serrations, a 3-3/4" ramped barrel, full-length metal guide rod, fixed blade front sight on the barrel, dovetailed square notched rear sight, solid serrated curved trigger, external hammer with a serrated spur, "hammer block" safety on the left side of the frame (for cocked and locked), serrated slide mounted manual safety, serrated heel mounted magazine release, smooth grip straps, and two-piece checkered wood grips. The original blued finish retained is approximately 90% with edge wear, light handling blemishes, and contact wear from operation. Metal displays no deformation, but there are areas of light oxidation. Action functions well but feels dry and dirty, and the bore is bright with strong rifling. The wooden grips are in excellent good condition with small dings, and light handling wear to the checkering. Pistol includes one 12-round magazine with a "finger grip" extension, total. Condition is NRA Good. ***Modern Firearm***

Full mounted pheasant. Measures 18"H x 30"L and lady amherst mount small condition issue losses in chest area. 12"H x 12"L

Two gourd wall pockets with Kachina designs. Measures 12" x 5-1/2" and 6" x 6". Two arrows with turkey feathers and stone points. Clay pot signed SEAGUILLI not native American. Measures 7" x 7". A feather polychrome pot signed Miguel Lopez. Measures 81/2" x 5". A small olla pot with geometric design signed J Olivis. Measures 5" x 4" A small polychrome pot signed Yoiy Ledezma 3" x 5".

Set in a carved limestone matrix featuring multiple ammonites and a central orthocerea Devonian Period roughly 350-400 million years ago. Measure 14" x 11"

By EC Rost. Dated 1890. Depicting roadside church double matted in oak frame. Measures 31-1/2 x 10-1/2"

Yugoslavian made controlled round-feed bolt-action rifle chambered for .338 Winchester Magnum. Imported by Interarms out of Alexandria, VA., the Mark X was introduced in 1969. Manufactured by Zastava, the action is based on a Mauser 1898. Rifle features a gloss blued finish, receiver drilled and tapped for optic mounting, a 24" tapered barrel with a recessed crown, dovetailed ramped blade front sight (bead missing), folding adjustable rear sight, adjustable serrated curved trigger, serrated butter knife bolt-handle with a jeweled bolt body, left receiver rail mounted jeweled bolt release, hinged floorplate with a serrated release inside the trigger guard, and a serrated sliding manual safety on the right side of the tang. The hardwood furniture consists of a semi-pistol gripped Monte Carlo style shoulder stock with cut checkering at the wrist, cut checkered forend with a sling stud, sling stud on the bottom of the shoulder stock, smooth black plastic grip cap with a white spacer, and a black ventilated rubber recoil pad with white and black spacers. A Bushnell fixed power scope with a duplex reticle is installed on the receiver using two-piece Weaver mounts with 1" rings. The original gloss blued finish retained is approximately 99% with superficial handling blemishes, and the cocking piece and receiver are starting to take on a plum color. Metal displays no deformation, but there is some extremely light oxidation around the front sight, and a couple of very small spots on the barrel. The bolt handle also shows sparse oxidative speckling. Furniture wood is in excellent condition with very minor handling and storage marks. The action is smooth and crisp, and the bore is bright with strong rifling. The scope's sight picture is clear and bright. The exact date of manufacture cannot be determined. Condition is NRA Good. ***Modern Firearm***

Includes: (2) United Black Samurai-style knife, 12" fixed blade, 19" overall with leather sheath. Honshu 12" fixed blade, 19" overall with leather sheath. Honshu 11" fixed blade, 23.5" overall with leather sheath. Timber Wolf Samurai-style 17" blade, 27" overall, paracord wrapped handle with kydex sheath/scabbard. Samurai-style 18.5" blade, 28" overall with Ka-Bar style handle and nylon sheath.

Three Items Total. 1) CVA Wells Fargo Model .31 caliber percussion revolver. Made from a CVA kit. 4" octagonal barrel, Colt marked cylinder wit Stagecoach hold-up scene. Brass plated grip strap & triggerguard. The barrel & cylinder are in the white, grip is unfinished. Action is stiff, needs cleaning/oil. Comes with kit instructions. 2) CVA 1858 Remington New Model Army, .44 cal. Manufactured in Italy by Armi San Marcos, 1988, imported by CVA. 8" octagonal barrel, blue finish, brass frame & triggerguard, non-fluted 6-shot cylinder, smooth wood grips. Very good condition, action is crisp/smooth. Comes in a nice brown leather belt holster. 3) CVA Colt model 1861 Navy, 44 Cal. Manufactured in Italy by Armi San Marcos, imported by CVA. Made from the CVA Kit. 8" barrel, blue finish, brass frame & triggerguard, 6-shot cylinder has Naval Battle scene. Wood grip is unfinished, overall very good condition, action is smooth, needs a good cleaning. Comes with kit instructions. Includes a nice Civil War style brown leather flap holster. SN: 36343.

Two Items Total. 1) Armi San Marco Deluxe Edition 1862 Police .36 caliber Blackpowder revolver. Engraved with nickel plated barrel, cylinder & hammer. brass plated grip strap & triggerguard. Manufactured 1989. Very good condition, comes with a brown leather holster rig with .22 cal. loops. 2) Fabbrica d'Armi Esterina Riva/EIE Model 1858 New Army Percussion Revolver, Manufactured 1973. .44 Cal. Action works fine, been in storage a long time, needs a good cleaning. Comes with a Hunter brown leather holster rig with cartridge loops.

with bullet hole to the head measures 21"x17".Condition bridle losses and cracking.